Download "user manual"
Transcript
Saddle Adjustment The saddle is correctly adjusted when your heel reaches the pedal (when the pedal is at the lowest point) while your leg is completely straight. When you are pedaling your leg should be bent at the knee. See Image 1. Important information While adjusting the height pay attention that the seat post does not exceed the maximum extension (see image 2) If the seat post is not correctly inserted this may cause a Image 2 fall or a broken frame. If it is not possible to adjust the height this way, choose a larger frame. Image 1 14 A guideline to find your frame-size can be found in our catalogue or on www.ktm-bikes.at/service The saddle should be assembled in horizontal position. You can use a water level to optimize your adjustment (image 3). The area in which the saddle rails should be clamped is marked on every saddle. Make sure you do not clamp the saddle outside the marking. Use the given torques you can find on the saddle rails/