Download PIP 2424MS CE-LVD test Report

LVD TEST REPORT
4.2.1
4.2.2
General
Rack-mounted equipment.
Steady force test, 10 N
4.2.3
Steady force test, 30 N
4.2.4
Steady force test, 250 N
4.2.5
Impact test
Fall test
Swing test
Drop test; height (mm)....................................:
Stress relief test
Cathode ray tubes
Picture tube separately certified......................:
High pressure lamps
Wall or ceiling mounted equipment; force (N)...:
Rotating solid media
Test to cover on the door……………….:
4.2.6
4.2.7
4.2.8
4.2.9
4.2.10
4.2.11
4.3
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
4.3.6
4.3.7
Clause
4.3.8
Design and construction
Edges and corners
Handles and manual controls; force
(N)............:
Adjustable controls
Securing of parts
Connection by plugs and sockets
Direct plug-in equipment
Torque.............................................................:
Compliance with the relevant mains plug
standard...................................................:
Heating elements in earthed equipment
Requirement + Test
Batteries
- Overcharging of a recharge able battery
- Unintentional charging of a non-rechargeable
battery
18 / 76
TRF No. IEC60950_1B
(see Annex DD)
The EUT is still complying
with relevant requirements of
this standard after 10 N force
is applied to the components
No internal enclosure in the
sense of this standard
The EUT is still complying
with relevant requirements of
this standard (all the
enclosure materials listed in
the table 1.5.1 are tested)
Test on enclosure
Test on enclosure
Test on enclosure
No handle or control provided
Mechanical fixings in such a
way designed that they will
withstand mechanical stress
occurring in normal use
Not direct plug-in equipment
P
N
P
N
P
P
P
P
N
N
N
N
N
N
N
N
P
P
N
N
P
P
N
-N
No such device within the
EUT
Result - Remark
On external batteries use
N
Verdict
N
N
N