Download Hidrex GS400 User Manual

Transcript
Hint: By pressing the ENTER key , you can directly switch to
treatment mode without having to wait.
2) Once in Setup Mode, activate or deactivate the options as desired1:
Option
MEMO
Function
Symbol
If Memory is activated, Active if LED  is lit
the unit will always save
the most recent “time“ and
“dose” treatment settings;
otherwise the system runs
in manual mode.
Key 
Important: The Setup Mode is generally activated only direct after
switching on the device. If you left the Setup mode, you
must turn off the device shortly and then again, must switch
on in order to alter the above treatment options.
1
12
Adjust the system in accordance with your doctor’s instructions.
User Manual Tap Water Iontophoresis System GS400
Rev. 1.0 / 2011-10-10