Download User Manual - D-Link

Section 3 - Configuration
My IPv6 Select Autoconfiguration (SLAAC/DHCPv6) from the dropConnection is: down menu. The access point will request IPv6 settings from a
DHCPv6 server on your network.
IPv6 DNS You can select to have the access point automatically obtain
Settings: DNS server settings from the DHCP server, or you can specify
IPv6 DNS server settings to be used. If you select Obtain IPv6
DNS automatically, no further configuration is required.
Primary DNS Enter the primary IPv6 DNS server address to be used.
Server:
Secondary DNS Enter the secondary IPv6 DNS server address to be used.
Server:
Click Save Settings at the top of the page to save the current
configuration.
D-Link DAP-1665 User Manual
51