Download DL1700E Series Digital Oscilloscope Communication Interface

5.8 CURSor Group
:CURSor?
Function
Syntax
Example
:CURSor:TY:DEGRee:DX?
:CURSor:TY?
Function
Syntax
Example
Queries all settings related to the cursor in the
T-Y display.
:CRSor:TY?
:CURSOR:TY? -> :CURSOR:TY:TYPE OFF;
HORIZONTAL:TRACE 1;POSITION1 3.00;
POSITION2 -3.00;:CURSOR:TY:
VERTICAL:TRACE 1;
POSITION1 -4.0000000;
POSITION2 4.0000000;:CURSOR:TY:
MARKER:M1:TRACE 1;
POSITION -3.0000000;:CURSOR:TY:
MARKER:M2:TRACE 2;
POSITION -1.0000000;:CURSOR:TY:
MARKER:M3:TRACE 3;
POSITION 1.0000000;:CURSOR:TY:
MAKER:M4:TRACE 4;
POSITION 3.0000000;:CURSOR:TY:
DEGREE:TRACE 1;
POSITION1 -4.0000000;
POSITION2 4.0000000;
REFERENCE1 -2.0000000;
REFERENCE2 2.0000000;RVALUE 90
Function
Syntax
Example
:CURSor:TY:DEGRee:DY?
Function
Syntax
Example
Syntax
Example
IM 701730-17E
Queries all settings related to angle cursors in
the T-Y display.
:CURSor:TY:DEGree?
:CURSOR:TY:DEREE? -> :CURSOR:TY:
DEGREE:TRACE 1;
POSITION1 -4.0000000;
POSITION2 4.0000000;
REFERENCE1 -2.0000000;
REFERENCE2 2.0000000;RVALUE 90
Queries the angle difference, ∆V, between
angle cursors in the T-Y display.
:CURSor:TY:DEGRee:DY?
:CURSOR:TY:DEGREE:DY? ->
:CURSOR:TY:DEGREE:DY 5.2500000E-03
:CURSor:TY:DEGRee:JUMP
Function
Syntax
Example
Description
Moves the angle cursor in the T-Y display to the
spcified zoomed waveform.
:CURSor:TY:DEGRee:JUMP {C1_Z1|
C1_Z2|C2_Z1|C2_Z2}
:CURSOR:TY:DEGREE:JUMP C1_Z1
The cursor jumps to the center position of the
zoomed waveform.
C1 and C2 represent Cursor1 and Cursor2,
respectively.
:CURSor:TY:DEGRee:POSition<x>
Function
Syntax
Example
Sets the psition of the angle cursor in the T-Y
display or queries the current setting.
:CURSor:TY:DEGRee:POSition<x>
{<NRf>}
:CURSor:TY:DEGRee:POSition<x>?
<x>=1 or 2
<NRf>=–5 to 5 (10 div/displayed record length
steps)
:CURSOR:TY:DEGREE:POSITION1 2
:CURSOR:TY:DEGREE:POSITION1? ->
:CURSOR:TY:DEGREE:
POSITION1 2.0000000
:CURSor:TY:DEGRee:REFerence<x>
Function
Syntax
Example
:CURSor:TY:DEGRee?
Function
Queries the angle difference, ∆D, between
angle cursors in the T-Y display.
:CURSor:TY:DEGRee:DX?
:CURSOR:TY:DEGREE:DX? ->
:CURSOR:TY:DEGREE:DX 180.00000E+00
Sets the position of the zero point (Reference 1)
or the end point (Reference 2) that will be used
as a reference in the angle cursor
measurement or queries the current setting.
:CURSor:TY:DEGRee:REFerence<x>
{<NRf>}
:CURSor:TY:DEGRee:REFerence<x>?
<x>=1 or 2
<NRf>=–5 to 5 (10 div/displayed record length
steps)
:CURSOR:TY:DEGREE:REFERENCE1 -1
:CURSOR:TY:DEGREE:REFERENCE1? ->
:CURSOR:TY:DEGREE:
REFERNCE1 -1.0000000
:CURsor:TY:DEGRee:RVALue
Function
Syntax
Example
Sets the reference angle of the angle cursor or
queries the current setting.
:CURSor:TY:DEGRee:RVALue {<NRf>}
:CURSor:TY:DEGRee:RVALue?
<NRf>=1 to 720
:CURSOR:TY:DEGREE:RVALUE 180
:CURSOR:TY:DEGREE:RVALUE? ->
:CURSOR:TY:DEGREE:RVALUE 180
5-27
5
Commands
Queries all settings related to cursor
measurements.
:CURSor?
:CURSOR? -> :CURSOR:TY:TYPE OFF;
HORIZONTAL:TRACE 1;POSITION1 3.00;
POSITION2 3.00;:CURSOR:TY:VERTICAL:
TRACE 1;POSITION1 -4.0000000;
POSITION2 4.0000000;:CURSOR:TY:
MARKER:M1:TRACE 1;
POSITION -3.0000000;:CURSOR:TY:
MARKER:M2:TRACE 2;
POSITION -1.0000000;:CURSOR:TY:
MARKER:M3:TRACE 3;
POSITION 1.0000000;:CURSOR:TY:
MARKER:M4:TRACE 4;
POSITION 3.0000000;CURSOR:TY:
DEGREE:TRACE 1;
POSITION1 -4.0000000;
POSITION2 4.0000000;
REFERENCE1 -2.0000000;
REFERENCE2 2.0000000;RVALUE 90;:
CURSOR:XY:TYPE OFF;HORIZONTAL:
TRACE XY1;POSITION1 3.00;
POSITION2 -3.00;:CURSOR:XY:
VERTICAL:TRACE XY1;POITION1 -3.00;
POSITION2 3.00;:CURSOR:XY:MARKER:
TRACE XY1;POSITION -3.0000000