Download INSTRUCTION MANUAL

7
DV MODE OPERATION
D Calling a specific station in another zone (Different zone call)
Continued instruction from step t on page 56.
Zone A
q
w
Area
e
Gateway
r
Repeater q：NARA43
(JP3YHL)
Repeater e：HIRANO43
(JP3YHH G)
Repeater u：HAMA43
(JP1YIU)
MY call sign：
JA3YUA
• STEP 3 (RPT2 selection)
uPush and hold [UR](.) for 1 sec. to enter the link repeater
(RPT2) selection.
iRotate [DIAL] to select the preset gateway repeater “GW.”
• Only the repeaters that have gateway capability appear.
Zone B
t
y
Gateway
u
i
Station call sign：
JM1ZLK
OTE: If the other station has accessed the repeater at
N
once, the D-STAR system will connect to the repeater automatically even you don’t know where the station is (possible in the same area as you, or in the same zone or a
different zone). In this case, you select “GW” as the RPT2
selection. The Auto gateway setting “GW SET” is helpful
(p. 134).
58
oPush [UR](.) to exit the link repeater selection.
!0Push [PTT] to transmit; release to receive.