Download EA-350 Grain Bag Unloader Operator`s Manual

The tractor engine is turned on, its PTO is engaged and the last
grain remaining in the bag is shoveled into the auxiliary auger by
hand (Fig. 31). Once unloading is concluded and engine turned
off, the sweep auger coupling gears' handle should be pushed in
and the lock pin reinserted. The coupling gears are connected to
the drive shaft by means of a flange fitted with shear bolts. Should
these bolts be cut, unscrew gear case cover and replace with low
carbon steel SAE 1010 or C10 bolts of same diameter as the
original.
Fig.30
Fig.31
CAUTION:
Always disable the sweep augers when grain is being introduced manually in the hopper in the final stages of
work.
19