Transcript
E 106 CAUTION! Please read and understand these instructions before installing or operating this unit. SPECIFICATIONS: Model: Weight: Size: Lamp: Fuse: Supply Voltage: Working Position: Duty Cycle: Colors: Warranty: Operating Instructions: The E 106 is a reliable, inexpensive par 36 pin spot. The unit shines a tight focused beam of light. This lamp can be used with dimmers or chasers. For dramatic effects use this lamp in multiples with colored gels. Universal gels are available in a variety of colors and may be purchased separately. To enhance the beams of light use this lamp with a fog machine. Caution! Never open unit when in use. Always disconnect main power before serving or replacing lamp. Remember to always replace with the exact same type lamp and fuse. Lamp Replacement: Unscrew the front lens cap and remove it. Flip the light upside down and let the bulb fall out. Use a flat blade screw drive to loosen the bulb terminals. Discard the old lamp and replace with matching lamp. Reassemble in reverse order. 1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our 1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with dated valid receipt must be submitted at time of service. E 106 3 lbs. 5”H x 6”W x 6”L ZB-4515,6V/30W 1 Amp 120V Any Safe position None Clear 1 Year Limited Warranty Eliminator Lighting warranty does not cover items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty is only valid with-in the United States. DIMMER WARNING! This fixture is fitted with an inductive transformer. If this unit is to be used with a dimmer or chaser, the dimmer or chaser must be a zero-crossing type. Zero-crossing and dimmers and chasers are readily available. Before purchasing a dimmer or chaser consult your dealer for product availability. ©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
