Download Heat Spy Catalog
Transcript
® HEAT SPY Hand Held Non-Contact Infrared Thermometers DHS35XT shown with LCD display and telescopic sight Wahl introduced the FIRST portable non-contact infrared thermometer in the world, and continues to provide the wide selection and expert application support you require. www.palmerwahl.com PW1230 Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED 02/11 Rev A High Performance Infrareds DHS24 • DHS26 • DHS28 Series Since Wahl introduced the FIRST digital portable infrared thermometer thousands have been in use trouble-free for years. With NIST traceable accuracy, and FM approval available, Wahl’s DHS24, DHS26, DHS28 Heat Spy® Infrared Thermometers are the most advanced, easy to use and durable Infrareds in the world. Their precision ground mirrors are protected by rare-earth germanium filters, and tightly focus infrared energy on the patented detector for accuracy as accurate as ±0.3% full scale with 1°F / °C resolution. Factory Mutual Approved models for potentially explosive environments are available. (see page 5). Rugged, cast and extruded aluminum case, provides shielding against stray EMF from machinery and engines. Temperature readings are updated 3 times per second on your choice of standard LCD display, or LED for low light levels. High reliability and higher accuracy than others. Telescopic Sight For long distances (20 to 100 feet) or precise aiming on small objects such as bolts, thick cable, tubing, forgings, and castings. The Heat Spy “T” version telescopic sight provides sighting on the centerline of the infrared optics. Switchable Laser Aiming Sight Enclosed Optical Sight Highly visible narrow red light beam pinpoints objects up to 100 feet away. Good choice for locating hot spots and for centering on targets. For most applications, the standard enclosed optical sight provides target definition at 4 feet and 20 feet with parallax correction. WARRANTY Features for All Models • Adjustable Emissivity • Maxitemp® Peak Temperature Hold • Self Test • Auto Calibration • °F/°C Switchable • NIST Traceable Accuracy • Rugged Aluminum Housing • Sighting and Display Options • Output to Recorder • AC Adapter • Input Jack for Battery Pack on non-X models Display Options and Modes Display options for LCD and LED. LCD is best for most uses. Select LED for low light conditions. Measured temperature is updated 3 times per second on large LCD. 2 PEAK holds highest measured temperature, and is especially useful in high temperature scans. Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED TEST mode flashes room temperature to show Heat Spy is working properly. BATT displays low battery. ---- indicates measurement HLP flashes when instruis over or under the range ment is out of specification. of the instrument. (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com PW1230 02/11 Rev A DHS24 • DHS26 • DHS28 Series High Performance Infrareds DHS24 • DHS26 • DHS28 Series Features • Superior accuracy and sensitivity between 0° to 1000°F (-20° to 550°C) • Accuracy of ±0.3% of full scale • Repeatability of ±1°F • FM approved (Intrinsically Safe) models available • Enclosed Optical, Closed Laser, or Telescopic Sighting options • Anti-reflective filter for accurate use in strong sunlight or other light sources • Applications include all normal materials, including glass surfaces DHS24L • Not affected by IR heaters, carbon dioxide or water vapor. Will not measure through glass • 3 Year Warranty Please see page 5 for a complete listing of DHS24 specifications. DHS26 Series Additional Features • Wider Temperature Range: 0° to 2000°F (-20° to 1000°C) • Accuracy of ±0.3% of full scale • Application for all normal material, including glass surfaces • Sighting, Display, and FM options available • 3 Year Warranty Please see page 5 for a complete listing of DHS26 specifications. DHS24XT DHS28 Series Additional Features • Ultra High Range: 32° to 2500°F (0° to 1380°C) • Specialized tool for measurement of glass gobs, heat treating, annealing, welding, and metal ingot operations, does not measure through glass ports • Accuracy of ±0.3% of full scale • Repeatability is 3°F • 3 Year Warranty • Telescopic Sight option recommended Please see page 5 for a complete listing of DHS28 specifications. DHS28XT DHS24, 26, and 28 Series Heat Spy Distance to Spot Ratio: 20:1 PW1230 02/11 Rev A (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com WARRANTY Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED 3 High Performance Infrareds DHS29X • DHS35XT Series Designed for measurements in the processing of Ferrous and Non Ferrous Metal, the Wahl DHS29X and DHS35XT Heat Spy® models are built from the bottom up for precise, accurate measurement of high temperatures under the toughest factory conditions. Rugged, cast and extruded aluminum case, provides shielding against stray EMF from machinery and engines. DHS29X Series Features • Measures through glass ports, flames, and products of combustion • High Temperature Range: 900° to 3200°F (482° to 1760°C) • Narrow spectral range of 2.1 - 2.5 microns for general purpose, high temperature measurement through glass • Small target resolution and long telescopic range • Aim through ports in furnace walls at refractories, glass gobs, furnace tubes, ceramics, billets, slag, and annealing materials • Sapphire window protects the silicon optics from heat and contamination • 3 Year Warranty DHS29X Please see page 5 for a complete listing of DHS29X specifications. DHS35XT Features • Measures furnace tube temperatures through open ports • High Temperature Range: 800° to 3200°F (426° to 1760°C) • Narrow spectral range of 3.5 - 4.1 microns • Specialized Reflex Sighting to enable readings from very small target areas • Minimizes errors caused by the reflectance from walls and flames • Does not measure through glass ports • Best choice for high temperature general purpose operations • Offered with telescopic sighting system only • 3 Year Warranty Please see page 5 for a complete listing of DHS35XT specifications. DHS35XT WARRANTY 4 Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED DHS29X, and 35XT Series Heat Spy Distance to Spot Ratio 100:1 (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com PW1230 02/11 Rev A High Performance Infrareds DHS24 • DHS26 • DHS28 DHS29X • DHS35XT Series Specifications Model Number Temperature Range DHS24 (LED) DHS24X (LCD) DHS26 (LED) DHS26X (LCD) DHS28X (LCD) DHS29X (LCD) DHS29XT (LCD) DHS35XT (LCD) 0° to 1000°F -20° to 550°C 0° to 2000°F -20° to 1000°C 32° to 2500°F 0° to 1380°C 900° to 3200°F 482° to 1760°C 800° to 3200°F 426° to 1760°C 8 to 14 µm 8 to 14 µm 8 to 14 µm 2.1 to 2.5 µm Distance to Spot Ratio 20:1 Spectral Range 100:1 Emissivity Adjustable 0.2 - 1.0 Accuracy at 77°F ±5° ± 0.3% FS Repeatability ± 1°F ± 0.5% FS ± 2°F ± 3°F Resolution 1°F / °C Response Time to 95% of Reading 1 second Operating Temperature 25° to 125°F (-4° to 52°C) Temperature Coefficient ± 0.1 deg/deg Practical Working Distance 0 to 40 ft. Sighting System 0 to 40 ft. (T) 150 ft. Enclosed, Laser, or Telescope Output to Recorder 0 to 150 ft. Enclosed or Telescope Telescope Only 1mV/deg. Power Supply LCD 1 - 9V Alkaline Battery, LED 2 - 6V Batteries Battery Life Weight (Lbs.) 3.5 to 4.1 µm 40 hours Laser Operation Will Reduce Battery Life 40 hours 2.2 lbs (0.99 kg), (T) 2.8 lbs (01.27 kg) 2.2 lbs (0.99 kg) 2.5 lbs (1.13 kg) (T) 3.0 lbs (1.36 kg) 3.0 lbs (1.36 kg) User Manual, LCD, 1-9V Battery, LED, 2-6V Rechargeable Batteries, Carrying Case, Trigger Lock, AC Adapter (Specify 110V or 220V AC) Included Accessories Specifications are subject to change without notice Model No. Suffix Codes and Availability Suffix No Suffix X L1 L5 XL1 XL5 T XT Heat Spy Series F&C, LED enclosed optical sight F&C, LCD enclosed optical sight F&C, LED laser sight 1mW F&C, LED laser sight 5mW F&C, LCD laser sight 1mW F&C, LCD laser sight 5mW F&C, LED telescopic sight F&C, LCD telescopic sight DHS24 Yes FM Yes FM Yes Yes Yes Yes Yes FM Yes FM DHS26 Yes FM Yes FM Yes Yes Yes Yes Yes FM Yes FM DHS28 NA Yes FM NA NA Yes Yes NA Yes FM DHS29 NA Yes NA NA NA NA NA Yes DHS35 NA NA NA NA NA NA NA Yes FM - Factory Mutual approved model is available where noted above. Specifications are subject to change without notice To specify FM model, modify the model number or suffix by adding “F” for Fahrenheit or “C” for Celsius scale, then add “-FM” to the model number. EXAMPLE: DHS24XC-FM or DHS26XTF-FM. Factory Mutual approved for use in Class I and II, Groups C, D, E, F, and G hazardous locations. Factory Mutual (FM) approved models do not include the following Heat Spy features or options: F/C switch (order dedicated Fahrenheit or Celsius model); 1mV/degree output; AC Adapter; laser sighting. PW1230 02/11 Rev A (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com WARRANTY Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED 5 High Precision Infrared DHS520B High Precision Infrared with Bluetooth® Communications The Wahl DHS520B Series Heat Spy® models are general purpose, high precision, portable infrared thermometers, designed for accurate high temperature measurement in the range of 1022° to 5432°F (550° to 3000°C). The measured temperature is displayed in four simultaneous modes: continuous, peak, mean, and valley, with user selected mode for the viewfinder display. The bright, back-lit external display panel indicates status and configuration of thermometer. Accurate sighting is ensured by the clear, wide angle (9°) field of view and small, clearly defined (1/3°) measurement area. Focusing is variable from 1m to infinity, with close focus options available using auxiliary lenses. The reflex optical system gives precise definition of target spot and simultaneous backlit display of user selected values in the viewfinder. The DHS520B features a 2-position trigger which takes and stores temperature readings. Emissivity compensation is provided via the icon-based menu system. The operating waveband has been carefully chosen to minimize errors due to uncertainty in emissivity and the effects of atmospheric vapor components. Specifications DHS520B - DHS520GB* Model Number Temperature Range 1022° to 5432°F (550° to 3000°C) Distance to Spot Ratio 20:1, 4:1 with closeup lens Spectral Response 1 µm with advance spectral filtering Emissivity 0.10 to 1.20 in 0.01 step graduations Accuracy < 0.25% (K) of reading Repeatability < 0.1% (K) of reading Response Time Operating Temp Range 32° to 122°F (0° to 50°C) Measuring Mode CONT, AVG, MAX & MIN Features Optical System 9° Field of View with 1/3° (180:1 to 98% measurement energy) area. Eyepiece adjustable: -3.75 to +2.5 diopters Focusing Range 39.3" / 1m to infinity 17.7 to 24.5" / 450 to 620mm with optional 8.5" / 215mm fixed focus close-up lens • Advanced spectral filtering enhances performance • Long term, drift free measurement • High accuracy and repeatability • Digital signal processing • Flexible user configuration • Robust - Ideal for industrial use Benefits Target Size Distance: ft (m) Target Size: in (mm) 328 (100) 22.6 (576) 164 (50) 11.2 (287) 65.6 (20) 4.48 (114) 32.8 (10) 2.24 (57) • No contamination, interference or damage to process or material 22.9 (7) 1.53 (39) 16.4 (5) 1.10 (28) • Accurate, reliable and stable temperature measurement to aid product quality control 6.5 (2) 0.43 (11) 3.2 (1) 0.18 (4.8) • Maximize production rates and efficiency Target size can be reduced to a minimum of 0.4mm/0.016in with optional close-up lenses. 30 ms (98% response) Display Update Time 0.5 seconds Sealing IP54 / NEMA 3 Output Bluetooth Communications Power Supply Dimensions Weight 1 9V Battery 8.25 x 2.75 x 5.5 inches (210 x 70 x140mm) Approximately 6.87 ounces (195 grams) 0.83kg/1.8lb Included Accessories Lens Cap, Dark Glass Eye Protection Filter (G model includes 2 filters), Wrist Strap, 9V Battery and User Manual Optional Accessories User Manual, 9V Battery, Waterproof Carrying Case, Close-up Lenses, Datalogger Software * Model DHS520GB includes 2 dark glass eye protection filters for use in the Glass industry. Specifications subject to change without notice Applications WARRANTY 6 Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED Note: The DHS520 replaces discontinued model DHS54. • Heat Treatment • Semi-Conductors • Any Industrial use (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com • Refractories • Steel • Glass PW1230 02/11 Rev A Long Range Infrared NEW! HSA300 Long Range Infrared The NEW! Wahl HSA300 is a Long Range Infrared Thermometer designed for use in the Electrical Power Generation and Transmission Industry, as well as other applications that require measuring objects from a long distance. Easily scan for hot spots with 300:1 distance to target optics. The HSA300 provides a 2-inch measurement spot at 50 feet. Its telescopic sight allows precise positioning of the measurement spot for up to 300 feet away, while maintaining a safe and convenient distance from the target. Peak temperature is displayed on the large main display easing the ability to capture the hot spot. The current temperature is displayed on the smaller secondary display. HSA300 Long Range Infrared Thermometer Specifications HSA300 Model Number Description Long Range Range (-20° to +280°C) Distance to Spot Ratio 300:1 Spectral Range 8 µm to 14 µm Emissivity 0.50 to 1.00 Accuracy <100°C >100°C ±5°C ±5% of Reading Resolution Housing 1°C Impact Resistant Plastic Power Supply Dimensions 2 - 9V Batteries 10 x 9 x 2.25 inches (254mm x 228mm x57mm) Weight (with Battery) 2.1lbs, (0.95 kg) Included Accessories User Manual, 2 9V Batteries, Carrying Case The HSA300 offers a large, easy to read digital display. • Easy Scanning for Hot Spots • 300 to 1 - Distance to Target Size Ratio • Measures from 300 feet away Specifications subject to change without notice Applications 127 mm 30.48 M • Chemical Processing • Preventive Maintenance • Power Generation FEATURES 50.8 mm 15.24 M Spot Size Distance • Power Transmission • Refinery and Steel Industry • Stacks, Kilns, and Reactors Palmer Wahl Warranty: Manufacturer warrants all products listed in this catalog to be free from defects in material or workmanship under normal use and service. The Manufacturer agrees to repair or replace any product which upon examination is revealed to have been defective due to faulty workmanship or material if returned to our factory, transportation charges prepaid, within the product specific warranty period stated in the catalog by the manufacturer. This warranty is in lieu of all other warranties, expressed or implied and of all obligations or liabilities on its part for damages including but not limited to consequential damages, following the use or misuse of instruments sold by the Manufacturer. No agent is authorized to assume for Manufacturer any liability except as set forth above. PW1230 02/11 Rev A 2" 50' 5" 100' HSA300 Heat Spy Distance to Spot Ratio 300:1 Note: The HSA300 replaces discontinued model HSA201. (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com WARRANTY Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED 7 Economy Infrareds DHS85XL • DHS115XL • DHS115XEL Wahl is pleased to introduce six models to our famous line of Heat Spy® Infrared Thermometers, the DHS85XL, DHS115XL, DHS115XEL, DHS135XEL, DHS215XEL and the NEW! DHS235XEL (see pg 9). These incredibly accurate and robust instruments will help you diagnose any problem, and prevent costly equipment downtime. The variety of features enable you to select the most appropriate Heat Spy® for your application. DHS85XL DHS85XL Model Features • The most economical and highest performing Heat Spy in its class • Used for Close Range: 8:1 (D:S Ratio) • Maximum temperature: 619°F (326°C) • Ultra low power consumption in shut-down mode Note: The DHS85XL replaces discontinued model DHS100X. DHS115XL Model Features • Used for Short Range: 12:1 (D:S Ratio) • Temperature Range to 999°F (535°C) • Easy Aiming • Quick Response • Easy location of hot spots • Ultra low power consumption in shut-down mode DHS115XEL and DHS115XL DHS115XEL Model Extended Features Same great features as the 115XL, Plus: • Includes Hi, Low Alarms • MAX/MIN/AVG/∆T calculations • Adjustable Emissivity for better accuracy • 10 points of memory to record temperature • Electronic trigger lock which allows readings to be taken continuously Note: The DHS115XL and DHS115XEL replace discontinued models DHS100XL and DHS100XEL. APPLICATIONS WARRANTY 8 Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED • Quality/Non-Destructive Testing • Electrical Troubleshooting • Manufacturing Process Control • Diesel/Fleet Maintenance • Plant/Facilities Maintenance • HVAC/Refrigeration • Automotive Repair and Diagnostics (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com PW1230 02/11 Rev A Economy Infrareds DHS135XEL • DHS215XEL and NEW! DHS235XEL Model Features DHS135XEL • High Temperature 1832°F (1000°C) • Long Range: 30:1 (D:S Ratio) DHS215XEL • High Temperature 1832°F (1000°C) • Extra Long Range: 50:1 (D:S Ratio) NEW! DHS235XEL • Extra High Temperature 2732°F (1500°C) • Extra Long Range: 50:1 (D:S Ratio) All Models offer: • 10 point memory log that can save current temperature • MAX/MIN/AVG/∆T • Electronic Trigger Lock allows continuous readings • Ultra low power consumption in shut-down mode Easy to read digital display on models DHS135 and DHS215 and DHS235. DHS215XEL Model Additional Features DHS215XEL shown with optional TC869 - 45° Spring Articulated Surface Probe, rugged Delrin® handle, ANSI mini-connector and 5-foot flexible compensated cable. For more information on optional probes visit www.palmerwahl.com. • Type K Thermocouple ANSI mini-connector input for probe to determine emissivity • Heat Spy® Data Logging Software DHS215XEL Heat Spy® Data Logging Software The DHS215XEL can be interfaced with a computer via the supplied USB cable and Heat Spy® Data Logging software. The software provides a convenient way to log temperature readings at user selectable time sampling intervals of 1 second to 999 hours in 1-second increments. High Performance Infrared Thermometer Temperature data is genItem Date Time Temperature Unit erated with a date and 1 5/4 17:39:59 75.9 Fahrenheit 24-hour format time 2 5/4 17:40:29 94.3 Fahrenheit stamp in a text file that 3 5/4 17:40:59 94.3 Fahrenheit can be used by programs 4 5/4 17:41:29 102.2 Fahrenheit 5 5/4 17:41:59 90.7 Fahrenheit such as Excel, Access, and Word for further analysis, graphing and report writing. DHS215XEL interfaced with a laptop computer via USB cable and Heat Spy® Data Logging software for online data acquisition. Shown with optional tripod. PW1230 02/11 Rev A (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com WARRANTY Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED 9 Economy Infrareds DHS85XL • DHS115XL • DHS115XEL DHS135XEL • DHS215XEL • DHS235XEL Specifications Model Number Description Temperature Range Distance to Spot Ratio Spectral Range DHS85XL DHS115XL DHS115XEL DHS135XEL DHS215XEL NEW! DHS235XEL Close Range Mid Temperature Short Range Mid Temperature Short Range Extended Features High Temperature Long Range Extended Features High Temperature Extra Long Range Extended Features USB, Type K Probe Extra High Temperature Extra Long Range Extended Features -4° to 619°F -20° to 326°C -25° to 999°F -32° to 535°C -25° to 999°F -32° to 535°C -58° to 1832°F -50° to 1000°C -58° to 1832°F -50° to 1000°C -58° to 2732°F -50° to 1500°C 5 to 14µm 8 to 14µm 8 to 14µm 8 to 14µm Adjustable 0.10 to 1.00 Adjustable 0.10 to 1.00 Adjustable 0.10 to 1.00 8:1 5 to 14µm 12:1 30:1 5 to 14µm Emissivity Fixed at 0.95 Adjustable 0.10 to 1.00 Accuracy ±2% of reading or 2°C whichever is greater ±5°F (±3°C) from -25° to -4°F (-32° to -20°C) ±3°F (±2°C) from -4° to 212°F (-20° to 100°C) ±2% from 212° to 999°F (100° to 535°C) 50:1 ±5°F (±3°C) from -58° to -4°F (-50° to -20°C) ±3°F (±2°C) from -4° to 212°F (-20° to 100°C) ±2% above 212°F (100°C) Repeatability ±2°F (±1°C) ±2°F (±1°C) ±2°F (±1°C) ±2°F (±1°C) ±2°F (±1°C) ±2°F (±1°C) Resolution 0.1°F (0.1°C) 0.1°F (0.1°C) 0.1°F (0.1°C) 0.1°F (0.1°C) 0.1°F (0.1°C) 0.1°F (0.1°C) 500 ms. 500 ms. 500 ms. 500 ms. 500 ms. 500 ms. Operating Temperature 32° to 122°F (0 to 50°C) 10 - 90% RH 32° to 122°F (0 to 50°C) 10 - 90% RH 32° to 122°F (0 to 50°C) 10 - 90% RH 32° to 122°F (0 to 50°C) 10 - 90% RH 32° to 122°F (0 to 50°C) 10 - 90% RH 32° to 122°F (0 to 50°C) 10 - 90% RH Storage Temperature 14° to 140°F (-10° to 60°C) 14° to 140°F (-10° to 60°C) 14° to 140°F (-10° to 60°C) 14° to 140°F (-10° to 60°C) 14° to 140°F (-10° to 60°C) 14° to 140°F (-10° to 60°C) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Response Time LCD Backlight Dual Display °F &°C Selectable NA Yes Laser Sight Switchable User Selectable, Class II Laser, less than 1mW Auto Power Off Automatically after approx. 6 seconds Automatically after approx. 6 seconds Automatically after approx. 6 seconds Automatically after approx. 6 seconds Automatically after approx. 30 seconds Automatically after approx. 6 seconds Max/Min/Avg/∆T No No Yes Yes Yes Yes Auto Measuring No No Yes Yes Yes Yes Audible Alarm No Yes Yes Yes Yes Yes 10 Point Memory No No Yes Yes Yes Yes Electronic Trigger Lock No Yes Yes Yes Yes Yes Tripod Mount Yes No No Yes Yes Yes USB Data Output No No No No Yes No Type K Thermocouple No No No No Yes No 9V Battery 9V Battery 9V Battery 9V Battery Operating Software Power Supply NA Battery Life 16 hrs for with Laser Off continuous operation Dimensions Weight with Battery NA 9V Battery 9V Battery 15 hrs for continuous operation 5.9 x 5.2 x 1.8" (150 x 133 x 45mm) 6.8 x 3.6 x 1.8" (173 x 93 x 45mm) 7.9 x 5.0 x 1.9" (200 x 127 x 47mm) 6.7 x 5.2 x 1.8" (200 x 132 x 45mm) 4.7 oz (135g) 7.8 oz (220g) 12.7 oz (360g) 11.6 oz (330g) User Manual, Included Accessories 15 hrs for continuous operation Software Cd Included 9V Battery User Manual, 9V Battery, Soft Pouch User Manual, 9V Battery, Carrying Case, and Wrist Strap User Manual, 9V Battery, Carrying Case, Wrist Strap & Software User Manual, 9V Battery, Carrying Case, and Wrist Strap USB Cable, Type K Probe* Optional Accessories Soft Pouch No No Optional T/C Probes** No * Wire Bead thermocouple - 1 meter in length, ** For more information on optional probes visit www.palmerwahl.com. Specifications are subject to change without notice 10 Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com PW1230 02/11 Rev A NEW! DHS125XEL Hybrid Infrared Hybrid Infrared The NEW! DHS125XEL Hybrid Infrared from Wahl is an intelligent contact and non-contact infrared thermometer which goes beyond the conventional temperature measurement capabilities of other infrared thermometers. Specifications Model Number Temperature Range DHS125XEL -25° to +1400°F (-32° to +760°C) Distance to Spot Ratio Emissivity 12:1 Adjustable 0.1 to 1.0 Accuracy ±5°F (±3°C) From -25° to -4°F (-32° to -20°C) Ambient Operating ±3°F (±2°C) From -4° to 212°F (-20° to 100°C) Temperature of 77°F (25°C) ±2% Above 212°F (100°C) Repeatability ±1°C (±2°F) Resolution 0.1°C (0.1°F) Response Time Operating Temperature Auto Power Off • eSmart Technology: Using an external Type K Thermocouple as a reference, the built-in software determines the emissivity of the target object, and automatically sets the emissivity of the instrument. 500 ms 0° to 50°C (32° to 122°F), 10 to 95% RH Automatically after approx. 6 seconds Yes • Color Identification Signal Technology: Display backlight changes to red when alarm setpoints are exceeded. Thermocouple Range -200° to 1380°C • Ultra low power consumption. Thermocouple Accuracy ±1.5% +1 degree • Extended time measuring reliability. Thermopile 5 to 14 µm eSmart Yes Thermocouple Connection (K) °F/°C Switchable Yes LCD Backlight Yes Color Identification Signal Yes Laser Sight Switchable Yes Audio Alarm Yes Dual Display Yes Trigger Lock Function Yes Max/Min/Avg/⌬⌻ Yes Auto-Measuring Yes 10 Point Memory Yes Tripod Mount Yes Power Supply 9V, 006P, IECF22, NEDA1604 Dimensions 7.09 x 5.12 x 1.57 inches (180mm x 130mm x40mm) Weight • Electronic Trigger Lock Function. • Tripod Mount: For hands free monitoring. Approximately 6.87 ounces (195 grams) Included Accessories User Manual, 9V Battery and Carrying Case Optional Accessories see Wahl Heat Prober® Thermocouple probes for surface measuring Specifications subject to change without notice DHS125XEL shown with optional Wahl Heat Prober® TC869 45° Spring Articulated Surface Probe. Applications • Electrical Troubleshooting • Automotive Maintenance • HVAC Energy Audits PW1230 02/11 Rev A • Food Safety and Processing • Test Terminals on Circuits • Maintenance & Inspections For more information on optional probes visit www.palmerwahl.com. (800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com WARRANTY Continued Innovation Since 1836 ISO 9001:2008 CERTIFIED 11 Pocket Infrared DHS110XL • DHS110XEL Compact and economical the Wahl DHS110 Pocket Heat Spy® is perfect for quick, routine maintenance and inspection applications. Rugged, light-weight construction allows quick use and easy carrying. Operation is a snap with the large, easy to read LCD digits, switch on back light for low light conditions, and low battery indicator. The bright laser aiming beam allows for precision targeting. Specifications Model Number Description Temperature Range DHS110XL DHS110XEL Standard Model Extended Features 0° to 850°F (-18° to 450°C) Displays HI when target temp > 851°F (455°C) nominal Displays LO when target temp < -20°F (-28°C) nominal Distance to Spot Ratio 10:1 Spectral Range 7-18µm Pre-set 0.95 Accuracy* Greater of ± 2% of reading or ± 3°F (± 2°C) Repeatability* Greater of ± 1% of reading or ± 2°F (± 1°C) Resolution DHS110XL DHS110XEL Advanced Features • Adjustable Emissivity of 0.10 to 1.00 • °F or °C Menu Selectable 500ms Operating Temperature 32° to 120°F (0° to 50°C) 10% to 90%, RH Storage Temperature -13 to 158°F (-25 to 70°C) without battery Display Hold Bright laser sight Class II (1mW), 0.5" left of target center Last reading and operating mode displayed for 6 seconds nominal upon ON button release LCD Backlight User selectable Temperature Update Rate • Audible and Visual Alarm at HI/LO Setpoint • Menu Selectable Display of Battery Voltage or % of Battery Life Calculating Mode NA MAX, MIN, AVG, MAX ΔT NA Yes Audible/Visual Alarm** °F &°C Selectable Applications • Motor Bearings • Moving Machinery • Painted Surface • Paper, Plastic • Process Assembly Lines • Rotating Machinery • Stacks, Steam Traps • Storage • Wave Soldering • Wheel Bearings • Welding • Wood • Transportation 5 readings per second Recall Last Reading • Memory Storage of Last Temperature Measured • Asphalt, Rubber • Assembly Areas • Chemical Processes • Ceramic, Glass • Circuit Boards, Chips • Closed Robotic • Dies, Shells • Electrical Busses • Food Processing • Furnaces • Heat Treating • High Voltage Targets • HVAC System Testing 1°F or °C in all modes Response Time Laser Sighting • Menu Selection of Maximum, Minimum, Average Temperatures, and Maximum Differential Adjustable 0.10 to 1.00. Automatically switches to AVERAGE mode for emissivity < 0.3 Emissivity Power Supply NA Yes °F or °C (switchable), 3 digit LCD °F or °C (menu selectable), 3 digit LCD 9V Alkaline (included) or NiCad battery 150 hours with backlight off. Laser and backlight operation will reduce battery life Display icon flashes when low Display icon flashes when low, Battery Life indicator menu recalls % life remaining/actual voltage Battery Life (with alkaline) Dimensions • Weight 6 x 2 x 1 inches (152 x 51 x 25 mm) / 7 oz (198g) Included Accessories User Manual, 9V Battery, Carrying Case, and Wrist Strap Options NIST Certification Specifications subject to change without notice * at 23°C ± 5°C, e = 0.95 ** High or Low DHS110 Series Heat Spy Distance to Spot Ratio 10:1 WARRANTY PW1230 12 234 Old Weaverville Road • Asheville, North Carolina • 28804-1228 Phone (800) 421-2853 • (828) 658-3131 • Fax (828) 658-0728 • Email: [email protected] www.palmerwahl.com 02/11