Download Product Catalogue

Microphone
Line Array Speaker Type T
•
•
•
•
•
•
•
Sturdy impact-resistant construction
Easy mounting
Internal two-way passive crossover network circuitry for single amplifier operation
Speaker’s downward angle adjustable with accessory mounting bracket
Horizontal angle adjustable in conjunction with optional SR-PB5 bracket
Optional matching transformer MT-S0601 for high-impedance operation
Safety wire supplied to prevent the speaker from falling during installation work and after
installation
• Ideal for installations in sports facilities with strong reverberation, including; school
gymnasiums - additional protector grille not required.
SR-T5
Wireless Systems
Rack Mount Equipment,
Network Audio and Others
Mixers
Model
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m)
Frequency Response
Speaker Component
Directivity Angle
Finish
Dimensions
SR-T5
Continuous pink noise: 250 W; Continuous program: 750 W
8Ω
96dB (1W, 1m equivalent, measured at 4m)
70 – 20 kHz
Low Frequency: 13 cm (5.12”) cone-type x 8, High Frequency: balanced dome-type x 24
Horizontal: 100°; Vertical: 35°
Enclosure: Plywood, black, urethane paint; Baffle: Polypropylene, black; Punched net & Mounting Bracket: Steel plate, black, acrylic paint
310 (W) x 1,239 (H) x 341 (D) mm (12.2” x 48.78” x 13.43”)
Weight
29 kg (63.93 lb) (including accessories)
Accessory
Mounting bracket A x 1, Mounting bracket B x1, Bracket mounting bolt x 6, Slide cover x 5, Slide cover mounting screw x 10, Eye bolt x 1, Safety wire x 1
Option
Wall pan bracket: SR-PB5, Matching transformer: MT-S0601
SR-T Series Optional Accessories
Amplifiers
Matching transformer
Wall pan bracket
SR-PB5
MT-S0601
Accessory Reference on page 107
Speakers
Compact Array Speakers
HX-5B
HX-5B-WP
• Innovative modular speaker design includes four preassembled
modules with four LF drivers and twelve HF dome tweeters
• Adjustable dispersion angle to 60, 45, 30 or 15 degrees
• Improved intelligibility through tailored coverage
• In-line driver arrangement for superior vertical coverage control
• Contoured waveguide-baffle for distortion-free coverage control
• High power handling; 600W continuous (200W pink noise)
• Splashproof versions (HX-5B-WP/HX-5W-WP)
• Parallel connectors - dual speakon and screw terminal
• A wide variety of optional mounting bracket is available
HX-5W
HX-5W-WP
Conference System
Megaphones
Intercom
Model
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m)
Frequency Response
Speaker Component
Directivity Angle
Finish
Dimensions
Weight
Dust/Water Protection
Accessory
Option
HX-5B
HX-5W
HX-5B-WP
HX-5W-WP
Continuous program: 600W
8Ω
96dB (60° mode), 97dB (45° mode), 98dB (30° mode), 99dB (15° mode)
70 Hz – 20 kHz (60° mode)
95Hz – 20 kHz (60° mode)
Low: 12cm (4”) cone-type x 4, High: Balanced dome-type x 12
Horizontal: 100°; Vertical: 60°, 45°, 30°, 15° variable
Enclosure: Polypropylene, black or white; Punched net: Surface-treated steel plate, black or white, (rust proof coating on WP versions)
408 (W) x 546 (H) x 342 (D) mm (16.1” x 21.5” x 13.5”)
16kg (35.3 lbs)
IPX4
—
Hanging bracket x 2, Hex. wrench x 1
Matching transformer: MT-200, Speaker mounting bracket: HY-PF1WP,
Matching transformer: MT-200, Speaker mounting bracket: HY-PF1B/W,
HY-CW1WP, HY-WM1WP, HY-WM2WP, HY-CN1B/W-WP
HY-CW1B/W, HY-WM2B/W, HY-CN1B/W, Speaker stand: HY-ST1
Subwoofers
Voice Evacuation
Mass Notification
FB-120B
FB-120W
Compact subwoofer, ideal for use with HX-5 Series
Extremely wide frequency range
For floor-, wall-, corner- or ceiling-mount
600W continuous program high-power subwoofer system
Model
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m)
Frequency Response
Speaker Component
Finish
Reference
65
•
•
•
•
Dimensions
Weight
Option
www.TOAcanada.com • 1-800-263-7639
FB-120B/FB-120W
Continuous program: 600W
8Ω
90 dB
40 Hz – 1.2 kHz
30cm (12”) cone-type
Enclosure: Plywood, black or white
Punched net: Surface-treated steel plate, white or black paint
408 (W) x 408 (H) x 450(D) mm (16.1” x 16.1” x 17.7” )
15kg (33.1 lbs)
Speaker rigging frame: HY-PF1B/W