Download User Manual

25
INSTRUCTION MANUAL
2)
Apply loss alarms to the following:
・ HDD LOSS: The alarm will sound if the internal HDD is damaged
・ HDD SPACE: The alarm will sound when the HDD is full (overwrite must be
disabled)
・ VIDEO LOSS: The alarm will sound when a camera is disconnected
2) Under ALARM MANAGE, configure the following:
・ OUTPUT: Set the output time (in seconds) on the spot monitor from 0s, 10s,
20s, 40s, or 60s.
・ BUZZER: Set the time (in seconds) for the buzzer when an alarm is triggered
—0s, 10s, 20s, 40s, or 60s
NOTE: Set the buzzer to 0s if you want to disable the alarm during motion detection
・ POST REC: Set the time (in seconds) for the system to record after a triggered
alarm—0s, 10s, 20s, 40s, or 60s
4) Click APPLY. Click CLOSE in the confirmation window.
EMAIL SETUP:
The system can send an email notification with a JPEG snapshot for triggered events
on the system.
Figure 2.5.2.12.2 Email Setup menu
To setup email notification:
1)
Under EMAIL, select ON.
25