Download Chap 3 System programming

-------------------------------------------------------------------------This time must be more than the Call forward time and the tranfer ringing time.
3.13.2 Operator Dialing/Transfer Ringing Time
Format : 4 9 6 TT#
Explanation: TT=seconds
01-99
default setting is 25seconds
Description: When transfer a call or somebody call in with OGM mode and dial a extension, then
the system will ringing the called extension for the setting times .
This time must be more than the Call forward time .
3.13.3 No Answer Transfer Time
Format : 1 8 4 TT#
Explanation: TT=seconds
01-99
default setting is 20 seconds
Description: When one extension setting Call forwarding when Ext is busy or nobody available
when the system call it ,after TT seconds it is not pick up, then the call will transfer to
the setting extensions automatic.
This time must be less than the transfer ringing time and internal call ringing time.
3.13.4 External Line Reservation Time
Format : 1 8 6 TT#
Explanation: TT = 01-99 reserved time is TT * 10 s
Description: Setting C.O. line reserved time when Ext. hold the call.
In default setting, TT=12, reserved time are 120s.
3.14 Transfer Operation Parameter
3.14.1 External Transfer Mode
Format: 1530#
Description: After 3 busy tone, can connect the C.O.line in 5 seconds, this is the transfer mode 1.
Format: 1531#
Description: After 10 secs busy tone, can connect the C.O.line again without off-hook, this is the
transfer mode 2.
3.14.2 External Transfer to a no answer Extension Process
Format: 1 6 2 #
163#
Call back the extension, this is default setting
Can not call back
Description: If the call back extension is busy, the system will release the C.O. line.
P23