Download EON10 G2 User Guide

DJ System with Passive Subwoofers
This system combines a pair of EON10 G2 powered speakers with externally powered subwoofers for
extra power at very low frequencies.
* Recommended crossover frequency = 80-150 Hz. (season to taste)
INPUT 1
INPUT 1
DJ Mixer
Output - Right
Output - Left
High Pass Output
Left
High Pass Output
Right
dbx® DriveRack™ PA*
Low Pass Output - Left
Low Pass Output - Right
Amplifier
Troubleshooting
Symptom
No sound
Likely Cause
Speaker not connected to active
AC power.
Power not switched on.
No sound, speaker is
connected to working
AC power but won’t come on.
Speaker power cable is faulty or
improperly connected.
Blown fuse.
What to do
Verify that speaker is connected and
that the circuit is on.
Switch on power and verify that power
LED is on.
Re-seat the power cable at both ends.
Substitute a known-good power cable
There are no user-serviceable fuses in
the EON10 G2. Take your speaker to a
competent servicer.
13