Download PathAway GPS 3 for Windows Mobile

Transcript
PathAway GPS 3
version 3.1
for
Windows Mobile™
Handhelds
User Manual
Last Updated: Aug 25, 2003 [0804]
PathAway GPS 3 for Windows Mobile - User Manual
Table of Contents
Table of Contents ......................................................................................................... 2
Installation ...................................................................................................................... 4
Getting Started ............................................................................................................. 7
Tutorial ............................................................................................................................. 9
Screen Views .............................................................................................................. 9
Choosing a Route...................................................................................................... 12
Simulating Navigation .............................................................................................. 13
Scrolling Maps .......................................................................................................... 14
Changing Map Views ............................................................................................... 14
Capturing Points on a Map ....................................................................................... 18
Creating Routes......................................................................................................... 18
Connecting a GPS ..................................................................................................... 19
Navigating with a GPS.............................................................................................. 20
Recording Tracks ...................................................................................................... 20
Following Recorded Tracks...................................................................................... 21
Terminology.................................................................................................................. 22
Map Data................................................................................................................... 22
Reference ...................................................................................................................... 24
Navigation Views .................................................................................................... 24
Navigating without Maps.......................................................................................... 26
Navigating with Maps............................................................................................... 27
Navigating with a GPS Device ................................................................................. 27
Main Menu................................................................................................................. 28
Context Sensitive Popup Menus ....................................................................... 32
Map Popup Menus .................................................................................................... 32
Dashboard Context Menus........................................................................................ 38
Customizing Screens................................................................................................. 41
Toolbar Buttons ........................................................................................................ 43
Hard Key Assignments ............................................................................................. 44
Dialogs........................................................................................................................ 45
GPS Menu................................................................................................................. 45
View Menu Dialogs .................................................................................................. 47
Options Menu Dialogs .............................................................................................. 49
Entering Longitude/Latitude Coordinates................................................................. 74
Entering UTM Coordinates....................................................................................... 74
Entering OSGB Coordinates..................................................................................... 75
PathAway Tools ....................................................................................................... 76
Installing ................................................................................................................... 76
Map Manager ............................................................................................................ 76
Icon Manager ............................................................................................................ 77
Copyright 2004 Muskokatech
Page 2 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Copyright 2004 Muskokatech
Page 3 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Installation
PathAway GPS 3 is an online application that must be downloaded from the internet from
http://PathAway.com or or an authorized Reseller. The program comes in the form of a Windows
Executable Setup program.
Before Downloading Ensure:
1.
2.
3.
4.
5.
You have read and accepted the License Agreement as posted on the Download Page and in
the Install program.
PathAway supports your Handheld Device Processor. (ie. ARM)
PathAway supports your installed operating system. (ie. Pocket PC 2003)
You have enough memory available to meet the specified system requirements.
You have enough disk space available on your PC to download and install the PathAway
Tools.
All the necessary information will be posted on the Download page.
Follow these steps to download and install the application.
- Press the Download PathAway button from the site. The following screen will appear if you're
using Internet Explorer 6 (Your actual screen may be different depending on the installation of your
Internet browser.:
It is safe to download the PathAway install executable. It has been certified to be Virus free and will
not access any private information on your PC. On this screen you can Run the Install program as
soon as it downloads by pressing the Open button. To run the install later, press the Save button
and specify a folder on your computer to save to. Be sure you remember this folder so you can find
the program after the install is complete.
- If you pressed Open, the Install program, will run immediately after downloading.
Copyright 2004 Muskokatech
Page 4 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
or
- If you pressed Save, then, locate the program on your PC via your Desktop, or Windows File
Explorer. Right click on the PathAway3Install.exe icon and press Open from the Popup menu.
- The following screen will appear.
- Read and accept the License Agreement, then press I Agree. The Choose Components Screen
Appears.
Copyright 2004 Muskokatech
Page 5 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
- Select the desired components to install. At the very least, you need to choose PathAway GPS 3. It
contains the actual program to run on your Handheld. THe PathAway PC Tools, allows you to
prepare your own maps and icons for use on the device. Once selected, then you need to ensure
that ActiveSync is running and connected to the device.
- Press Next and continue to follow the onscreen instructions until the the Setup program reports
the program has been installed successfully.
Once installed, proceed to the Getting Started section.
Copyright 2004 Muskokatech
Page 6 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Getting Started
Before starting, you should have downloaded and installed
the PathAway software, PathAway PC tools, and the
sample data, maps, point icons, and vehicles in either
gray scale or color format. Also ensure, the application
has been installed on the device.
PathAway is installed to your Programs folder on your
handheld. To access the PathAway application, first click
on the Windows Mobile Start Menu, and choose
Programs.
From the Programs screen, tap on the PathAway Icon
to start the application.
You may need to scroll down to locate the application
icon. If the application cannot be found, you will need to
run the installation program from your PC again. Ensure
ActiveSync is running before executing the install.
Copyright 2004 Muskokatech
Page 7 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
If you are running the free time limited trial version, you
will first be presented with the Startup Registration
screen.
If you have purchased, then this is where you enter your
Registration key to unlock the full unlimited application.
If you wish to continue running the trial, then simply
press the OK button. To exit the program immediately,
press Cancel.
Also on this screen is important information you may need
to refer to if you are looking for help or where to purchase
the application.
Program Version: The version number is listed under
the PathAway logo. If contacting PathAway Support, you
will need to specific this version number.
Email: Email address for support questions.
Web: Web site for information, support, purchasing, and
obtaining updates.
Registration key: When you purchase, you are given a registration key which is encoded to your
Owner name or your UID (Unique Device Identifier). Enter this key into this field and press OK, to
unlock full functionality of the program.
Owner Name: The registered Owner name on the device. You may be required to provide this
name for purchasing the application.
UID: The handheld device Unique Device Identifier. This ID is a unique number for the individual
handheld device. You may be required to provide this name for purchasing the application.
Now, try following the short tutorial to get an overview of PathAway's features.
Copyright 2004 Muskokatech
Page 8 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Tutorial
Be sure you have downloaded and installed the PathAway optional components.
If you haven't done so already, then start PathAway from the handheld Programs home page by
tapping on the PathAway Icon
.
If presented, press OK in the About PathAway Screen to continue to run the program.
Once the program starts up, you should see a map on the screen. If not, or you see the World
Map, then the tutorial maps have not been installed. To determine what maps and other data is
stored on your device, go to the select the PathAway main menu by pressing the Main menu toolbar
, then choosing the menu Options and select Maps. This will show you all of the maps
icon
installed on your device. If no maps are listed, then they have not been installed. In this case, you'll
need to go back and reinstall the application.
Screen Views
The first screen you see is the Full Screen Map View. PathAway has 5 different views. To see the
different views, select PathAway's menu bar. You bring up the main menu by tapping the main
menu toolbar button
.
Choose the View menu. Now choose one of the four screen views listed.
Here is an overview the different screen views.
Copyright 2004 Muskokatech
Page 9 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Full Screen Map View
Utilizes most of the screen to show as large a map area as
possible. Long/Lat, speed, elevation, and direction of
travel are displayed. This data is the “navigation” data in
the program.
Tracking View
Shows the map and navigation data. Default travel stats
are trip time and distance, current, average, and
maximum speed.
Copyright 2004 Muskokatech
Page 10 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Proximity View
Shows the map and “navigation” data, plus full info for
point and route proximity. Time and distance to
destination, and next point on track are shown. Position
off or on track is also displayed.
Route View
Shows the map and “navigation” data, plus full info for
point proximity. As you approach a point, distance from
and course to are displayed. Points in proximity are
displayed by closest point.
Copyright 2004 Muskokatech
Page 11 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Point View
Shows the map and “navigation” data, plus access to the
point/route and track databases. Useful for selecting items
from the databases and displaying them on the map or
placing them into a route. Details such as Position,
Proximity, Elevation, Time, Leg Time, Leg Distance, and
Leg Speed can also be displayed.
Tip. You can also traverse through the screens by
pressing hard key 2.
Choosing a Route
The sample data includes a route for you to try out. Go to
the GPS menu and choose New Trip.
In the New Trip dialog, select the drop-down at the top
of the screen, and choose Follow Route Forward.
Copyright 2004 Muskokatech
Page 12 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Next, from the Database drop-down, select the route
entitled Footes Bay to Rosseau. You're about to take a
nautical tour through the lakes of Muskoka Canada!
You have now chosen to use the Footes Bay to Rosseau
route for navigation, from the start of the route to the
end. Follow Route Reverse, allows you to follow the
route in reverse order for the return trip home.
Press OK to return to the main screen.
Now, to see the location at the start of the route, choose
the menu Goto-Start of Route. This moves the map to
center it's location at the start of the map.
You should see a red line on the map at Footes Bay. That
is your route line. A route is a series of points connected
together indicating a travel route. When navigating you'll
follow this route to get to your destination.
Note, if you don't see a map on the screen, then press the
or out
buttons. If these buttons are
Map Zoom In
yellow, then it means there is a map available to zoom to.
You should see a map similar to the screenshot.
Simulating Navigation
PathAway provides a nifty feature to animate your route before actually traveling. Under the GPS
menu, Select Simulate. The travel simulation has begun. The simulator works just as if you are
Copyright 2004 Muskokatech
Page 13 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
actually traveling. In fact, if you're following a recorded track, the simulator will display the actual
speed and time. (See Following Tracks later on in this section).
Watch the simulator until it stops at your destination, the town of Rosseau.
Note: When you're actually connected to a GPS, you'll see a blue line indicating your line of travel.
This is your recorded track. Each dot on the line represents a recorded point.
Try running the simulator with the different views. Each view shows you a different set of
interesting information. See Screen Views for details.
Scrolling Maps
Maps in PathAway can be larger than the screen, so scrolling maps is important. Besides scrolling
automatically as you move, maps can be scrolled using
your stylus in 2 ways.
1. Tap and drag a point on the map to drag the map
around. Release the stylus when you've reached the
position you would like to view.
2. Tapping and holding on the edges of the map will scroll
the map towards the edge tapped on.
Try it out. See if you can find the Joseph River on the
map. Scroll the map by following the red route line.
Tip. To quickly go to the start or end of your route, go to
the Goto menu and select Goto Start of Route or Goto
End of Route.
Changing Map Views
There are two different ways to change the view of the map:
1.
2.
By zooming in or out of different maps or
By scaling the current map. I.e.: Expanding or Shrinking the current map.
1. Zooming Between Maps
Copyright 2004 Muskokatech
Page 14 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
You can install as many different maps as you like into PathAway PathAway will organize and layer
the maps depending on the scale and geographic coordinates of the map. Think of the maps as if
they are organized from above the surface of the earth. When you are up very high, you see a
wider area. Moving closer (or down) you see less area and more detail. So Map Zoom In or
moves you closer, and Map Zoom out
moves you further away.
When you have two or more maps within the same geographic location that you are centered on,
you can switch in and out of these maps in one of the following ways:
•
•
select the
or
buttons or
press the hard Up (out) or Down keys (In) or
•
select an area of the map to bring up the Popup Menu. Choose "Map Menu >" from the
list, and select Zoom Map In, or Zoom Map Out or
selecting an area of the map, Choosing "Map Menu >" from the Popup menu, from the
Map Menu > select "Choose Map >" and select the map by name.
•
The samples come with a few different resolutions of
maps. The
buttons at the top right of the screen
allow you to move into and out of these stacked maps.
You don't need a map to increase or decrease the view,
but if there is a map available, it will be shown. These
buttons change shape to show you whether there is a map
available.
A highlighted zoom
button indicates there is a map
button means there is
available. A unhighlight zoom
not. Scroll around the Joseph River. You'll see the buttons
change. When the
button changes to
, press it.
You'll be shown a closer up view of the river. You can also
select maps by name by going to the Options-Maps
dialog, selecting a map, and pressing the Display button.
Please note, moving between stacked maps should not be
confused with map scaling where you zoom into or out of
a single map by expanding or shrinking the map. The
scaling of maps is done via the magnifying icons.
2. Scaling a Map (Expand/Shrink)
As of PathAway 3, you can now expand or shrink your maps on the view screen to show a wider
area or to get "close" to a location, while still rendering a view of the map. This operation is
recommended for Handhelds with higher processing power and internal memory, but is available for
all devices. To scale maps use one of the following methods:
•
select the
or
Copyright 2004 Muskokatech
buttons or
Page 15 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
•
selecting an area of the map, Choose "Map Menu >" from the Popup menu, and select
Zoom Scale In, or Zoom Scale Out.
When you zoom in, all of the map pixels are expanded to show you a closer look at the area. When
you zoom out, you will see a wider view of the map. To return to the original map pixels select the
Scale 100% icon
on the tool bar, or select the Popup menu > Map Menu > Scale 100%
Improving Visibility of Navigation Lines
You may notice the screen above has a thicker route line
and larger position marker. This is because the Color and
Lines settings were changed to improve the visibility of
the route line on the map. To do this, choose the Options
- Preferences menu, select the preferences category
Color and Lines.
In the Colors & Lines preferences, you can change the
way the lines and colors on the maps are displayed. If you
have a color device, you can create easy-to-read contrast
between your maps and route and track lines. Experiment
with this option until you've found a view that suits you.
You can even change the look of the current Position
Marker by selecting between 3 different styles.
Copyright 2004 Muskokatech
Page 16 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
[0804]For example, to change the way the active route
you are following is drawn, click on the Active Route
button. This will bring up the Line Style dialog and
display the current style for the Active Route. Change the
color by clicking on the Color button, and the width of the
line by pressing either the + or - buttons beside the width
label.
To have a circle drawn at each Route Point, check the
Show Points button.
When you are satisfied with the style, press the OK
button.
[0804] The Position Marker is the Arrow or cursor in the
center of the screen. It represents your current
geographical position on the map. If you are navigating
with a GPS, it points in your direction of travel. If you are
disconnected and following a route, it will point in the
direction to the next point in the route. If no route is
being followed, you'll see only the cross-hairs.
You can set the style of direction pointer in the Position
Marker Style dialog. To do this, click on the Position
Marker button, from the Lines & Style Dialog.
In the Position Marker Style dialog, you can choose the
desired Direction Arrow style, color, and size of the
marker. For more emphasis on screen, set the 3d Effect
to create a shadow behind the marker.
Copyright 2004 Muskokatech
Page 17 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Capturing Points on a Map
Run the simulator until it stops at the town of Rosseau.
Lets say there is a marina close by that you'd like to mark
for future reference. I.e. you're almost out of gas and
can't afford to go searching for the nearest marina.
Center the map at a shoreline near Rosseau. Press the
button. The Edit Point dialog is displayed.
Add Point
Here you can enter information about this point such as
its name, description, icon, position and elevation.
Position will be already entered because the point has a
location on the map. If you were actually tracking using a
GPS, the true position and elevation would be entered.
Alternatively, you can tap and hold on a point anywhere
on the map. A menu pops up with some options. Select
Add Point.
Tip. You can also add a point to the map by pressing hard
Press the key again to save the point and exit
key 1.
the Edit Point dialog. This is a quick way to capture a
point as you travel. You can go back to the point later to
enter its other details.
One of the coolest features of PathAway is that you can
use your own icons to display your points on the map. In
the Edit Point dialog, select the Icon Popup. You'll be
shown a list of available icons available to attach to a
point. If you installed the icons.prc database, an
extensive list of icons will be displayed. For the marina,
choose the Gas Station icon.
Tip:. Check out PathAway Tools - Icon Manager for
creating your own icons.
Creating Routes
To create a new route, go to the Options - Route dialog and select New. You will be presented with
a dialog for naming the route, and setting the mode of transportation. Select your vehicle for the
route. For this tutorial, select the Boat icon.
Copyright 2004 Muskokatech
Page 18 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
To add points to your route, select the Edit Points
button. This brings up an empty list of points. Choose
Add... Select Footes Bay Marina as your starting point.
Press OK. Select Add... again. Select Rosseau and OK.
Now you have a basic Point A to B route. Lets go with it
and press OK until you get back to the map screen.
On your map you should have one red straight red line
heading from Footes Bay to Rosseau. But you're not flying
there, so you'll have to choose to alter the route. Pick a
point along the water, and tap on the map. Choose the
Add to Route button. Press OK from the Edit Point
dialog to accept the point. The point will be added to the
route, and the route line is altered to reflect the change.
PathAway will insert the new point between the two
closest points along the route.
Note: Alternatively, you can choose to navigate to just a
single point by selecting the point on the map and
choosing Add to Route > New Route... from the Popup
menus. Choose the option to Navigate to selected point
from the New Route dialog.
Connecting a GPS
Now that you've got the basics, its time to get on your PathAway PathAway works best with a GPS
(Global Positioning Satellite) device. Most GPS devices transmit location information through a serial
cable attached to the PDA. Other units attach directly to the device. See the support page for a
listing of compatible GPS devices and accessories.
To setup your GPS device for use in PathAway, select the
menu GPS-Configure. Choose your GPS device protocol
from the list. Most GPS devices use NMEA standard
protocol. If your model is not specifically listed in the list
box, then NMEA will most likely work.
Select how you are connected to the GPS. If you attach
via cable, choose Cradle. If your device works through
the device infrared port, choose Infrared. Ensure your
GPS device is setup to communicate and match up the
baud, parity, bits, and stop bits settings. Most (if not all)
GPS devices use Parity=N, Bits=8, Stop=1. 4800 is the
most common baud rate.
Attach and turn on your GPS unit. Ensure you can get a
signal. Most GPS units require a direct line of sight to the
satellites. Press the Connect button to test the GPS. You
should see the data stream messages flowing from the
unit. Once your position is fixed, the longitude, latitude,
elevation, and UTC (Universal Time Clock) are displayed.
Press OK to exit the dialog. Congratulations, you're now
ready to navigate with PathAway Press the satellite
Copyright 2004 Muskokatech
Page 19 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
icon to connect and disconnect from the GPS.
When you first
Tip. You can also connect and disconnect the GPS by pressing the hard key 4.
connect, the New Trip dialog will appear. To accept the defaults (Follow last route, and record a new
track), press hard key 4 again to begin tracking with GPS.
Navigating with a GPS
Now that you're connected to the GPS, you can begin to travel. At this point you should have
acquired your own maps and installed them into PathAway using PathAway Tools - Map
Manager. You can acquire maps from online web mapping sites, or you can scan your own from
paper maps, use digital pictures, or get maps from CD-ROM.
Note: In order to use maps with a GPS, you need to calibrate them to their proper geographic
(longitude/latitude) coordinates. This can be done in map manger by specifying the top-left and
bottom-right coordinates of the map, or in PathAway using positions of known points. Refer to
Calibrating Maps for more information.
Once calibrated, PathAway will center the map to your current location. As you move, the map is
re-centered to show your position. If you are recording your track, you'll see a blue (or dark gray)
line showing your line of travel.
Recording Tracks
You can record tracks for later use, or to see where you've been. This is especially helpful in case
you start going in circles!
Tracking databases can get quite large, especially if you
are capturing constantly. This can slow screen refreshing
down and consume a large amount of memory. The
Preferences section under Tracks, has some options for
controlling track database size, and recording precision. A
good detailed track for traveling between 30 and 60 mph
is to set the precision to record position every 10 seconds.
To keep individual track database sizes down, you can
select the menu option End Trip. This will save the track,
and start a new one. Screen refreshes will only draw the
current recorded track.
Alternatively, you can set the tracking to record at certain
distances. This will create a track record when you reach a
certain distance. Therefore all track points will be of equal
distance apart, regardless of your speed.
Copyright 2004 Muskokatech
Page 20 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Following Recorded Tracks
Once you're recorded a journey, you can now use the track to follow. This is an extremely useful
feature for finding your way home.
To choose a track to follow, select the Options-Tracks
menu. The tracks are automatically named using the date
and time they are created. You can change the name for
your track and indicate the method of transportation by
pressing the Details button. Select the track you've just
recorded. Press Follow reverse. This will set activate the
track to be followed in the reverse order it was recorded
in. You will see the red route line on the map. You can
now use this track in the same way you would a route.
You can get additional information when following a
recorded track. To get the recorded track time as your
ETA data, go to the Options-Preference menu, and
select the Time section. Under the heading Time
estimates based on, turn the check box on entitled
Recorded Track Speed. You'll see your time remaining
in the Route view screen. This is the actual time it took
you when you recorded the track. This includes any stops
along the way.
Copyright 2004 Muskokatech
Page 21 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Terminology
Map Data
A database containing a map. The Map Manager is used to create maps for PathAway The current
version runs under Windows 95,98,2000,XP,ME or higher. Original maps can be in Jpeg, or BMP
format. You can create your own maps in a Paint program, or acquire the maps through scanning,
CD-ROM, or download from the Internet. You must ensure you do not violate copyright rules
applied for the maps acquired. In the Map Manager you can enter the Long/Lat coordinates for the
top-left and bottom right corners of the map, as well as the color depth. Gray shade, 16 color, 256
color, or 64 million colors (depending on capabilities of your device). Maps can be as large as the
user desires providing there is enough memory on the handheld. Maps should be in longitude and
latitude format. Meaning the actual curvature of the map is stretched onto a flat surface and all
longitude and latitude lines are straight.
Dashboard
Customizable Border around navigation map screens. Contains useful travel statistics and
information. Dashboard items can be modified via Tap and Hold on a particular item, and selecting
a new data item from the Popup menu. See Dashboard-Context Menu.
GPS
Global Positioning Satellite system uses a series of satellites to transmit data to receivers enabling
them to accurately pinpoint their location and elevation on earth. Originally developed by the U.S.
Department of Defense as a military system, GPS has become a global utility. It benefits users
around the world in many different applications, including air, road, marine, and rail navigation,
telecommunications, emergency response, oil exploration, mining, and many more.
PathAway utilizes connections to GPS devices to provide accurate positioning data.
Routes
Routes can be created by linking points together in a sequence. When following a route, the
distance to next point, and time and distance to destination are displayed. Also, the distance and
direction off of the route is shown.
Travel/Transportation Mode
Define your mode of transportation, for easy searching for routes and tracks. Time Estimates can be
made by the default vehicle speed or a custom speed you choose. Vehicles are currently defined PCside.
Tracks
Tracks can be created by recording GPS movement. These tracks can then be “Followed” to perform
as an accurate guide for the travel.
Icons
Copyright 2004 Muskokatech
Page 22 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Icons in PathAway can be created and modified by using the PathAway Tools - Icon Manager.
Original Icons can be created from a paint program in Jpeg or BMP format and imported into your
Icon database. These icons can then be used in PathAway to mark Points.
Points
Points are locations marked by the user. Each point can be identified by a name, icon, and
description. The icon you choose for your point, will be displayed on the map. In PathAway, points
are stored in the Points database. You make create multiple points databases to store points. To
Create and Edit these databases, go to the Points Dialog, and select Options-Edit Databases.
Proximity
While traveling, PathAway will display the points on the map that are in close proximity. If following
a track, the distance to the closest point on the track, and the distance to the end of the track are
displayed.
Simulate
Simulates a route by moving the map to points along the route in sequence until the end of the
route. Use the simulate to verify routes you've created, or to review tracks after they've been
recorded.
Copyright 2004 Muskokatech
Page 23 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Reference
Navigation Views
The main screens of the program are the navigation screens used for displaying maps, and other
travel and location information. The screens are all composed of a map viewing area surrounded by
a customizable dashboard. The dashboard can also be completely removed from the view in the
"View" menu. There are 5 different screens available for targeted use.. They are shown as follows:
Full Screen Map View
Utilizes most of the screen to show as large a map area as
possible. Long/Lat, speed, elevation, and direction of
travel are displayed. This data is the “navigation” data in
the program.
Copyright 2004 Muskokatech
Page 24 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Tracking View
Shows the map and navigation data. Default travel stats
are trip time and distance, current, average, and
maximum speed.
Proximity View
Shows the map and “navigation” data, plus full info for
point and route proximity. Time and distance to
destination, and next point on track are shown. Position
off or on track is also displayed.
Copyright 2004 Muskokatech
Page 25 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Route View
Shows the map and “navigation” data, plus full info for
point proximity. As you approach a point, distance from
and course to are displayed. Points in proximity are
displayed by closest point.
Information on this screen is targeted towards navigation
when following a route. If no Route us active, time and
distance estimates to next point, destination etc. will now
show on the screen.
Point View
Shows the map and “navigation” data, plus access to the
point/route and track databases. Useful for selecting items
from the databases and displaying them on the map or
placing them into a route. Details such as Position,
Proximity, Elevation, Time, Leg Time, Leg Distance, and
Leg Speed can also be displayed.
Tip. You can also traverse through the screens by pressing hard key 2.
Navigating without Maps
PathAway works with or without maps. When used without maps, PathAway will display all points in
a virtual Longitude and Latitude world. You can Zoom In and out to increase and decrease the Scale
Copyright 2004 Muskokatech
Page 26 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
factor of your view. If you have points, routes, or Tracks defined, PathAway will display them on the
screens. GPS connectivity works well with or without maps.
When the zoom buttons are not highlighted (
or
), you can increase of decrease the view
range of the virtual map. In this case, The scale zoom buttons (
The Zoom 100% button
zoom range.
or
)do the same thing.
in this case will bring up a dialog allowing you to specify the desired
Navigating with Maps
When navigating with maps, PathAway will center the map on your current location. When not
connected to GPS, you can scroll the map to view different portions.
To scroll the map, Tap down, then drag the stylus on the screen to scroll the map in the direction
you want.
Navigating with a GPS Device
PathAway supports any NMEA0183 v2.0 or higher compatible GPS device. This encompasses the
majority of GPS devices on the market. Delorme Earthmate™, and Tripmate™ proprietary protocols
are also supported. A GPS is not required to use the software. A GPS device can be cable or
infrared. Special serial cable can be purchased from GPS device manufacturer. A handheld device
serial cable adapter can also be purchased separately. Some devices may come with the required
cables for connecting to your handheld device. See the section on GPS Sites for information and
links to get your device attached to a GPS.
Current location on map is shown by the cross-hairs in the center of the map window or with an
arrow showing direction of travel. When connected to a GPS , direction is shown by course required
to reach the next point on route.
To navigate with your own maps, you need to convert and install them into PathAway using
PathAway Tools - Map Manager. You can acquire maps from online web mapping sites, or scan
them from paper maps, use digital pictures, or get maps from CD-ROM.
In order to use maps with a GPS, you need to calibrate them to their proper geographic
(longitude/latitude) coordinates. This can be done in Map Manger by specifying the top-left and
bottom-right coordinates of the map, or in PathAway using positions of known points. Refer to
Calibrating Maps for more information.
Once calibrated, PathAway will center the map to your current location. As you move, the map is
re-centered to show your position. If you are recording your track, you'll see a blue (or dark gray)
line showing your line of travel on the map.
Copyright 2004 Muskokatech
Page 27 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Main Menu
The following menus are available from all Navigation screens. Select the PathAway main menu by
pressing the Main menu toolbar icon
.
GPS Menu
Connect/Disconnect
Controls connection to GPS device.
Simulate
Simulates a route by animating travel along the points of
the route.
Start New Trip...
Start a new trip. Options to start with a new track log, or
continue current, and choose a new route to follow.
End Trip
Clear the track log, reset odometer. Next connection will
start with a new track log.
[0804] Advance Route Target
Move to the next route point to navigate to. Available
when Manual Route Targeting is set. (See Preferences>Routes)
[0804] Set Closest Route Target
Reset the Route Target point to the nearest Route Point in
the direction of travel. Available when Manual Route
Targeting is set. (See Preferences->Routes)
Configure GPS...
Copyright 2004 Muskokatech
Setup for GPS device. Choose device type. Confirm
communications.
Page 28 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
View Menu
Full Screen Map View
Shows Full Screen map view.
Tracking View
Shows Tracking view.
Proximity View
Shows Proximity view.
Route View
Shows Route View.
Point View
Shows Point View.
Map Display...
Show options for Map Display.
Show/Hide Dashboard
Turn Dashboard On/Off.
Default Dashboard
Restores original Dashboard for current screen.
Show/Hide Toolbar
Turn Top toolbar on/off
[0804] Refresh
Copyright 2004 Muskokatech
Force PathAway to enumerate all maps, and databases on
the registered folder locations. This feature can be used if
PathAway does not detect the addition or removal of maps
or databases from outside the application.
Page 29 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options Menu
Points...
Management of Points. Shows list of points. Options to Create new
points, delete, edit individual points, Sort, find, and go to selected
points on map. Beam points to others.
Routes...
Management of Routes. Shows list of routes. Options to Create new
routes, rename, delete, edit route points, duplicate, join 2 routes
together. Beam route to others. Select a route to display on the map.
Tracks...
Management of Tracks. Shows list of recorded tracks. Options to
rename, delete, edit track points, duplicate, join 2 tracks together.
Beam tracks to others. Select a track to display on the map.
Point Databases...
Management of Points databases. You can store points in multiple
databases and show/hide databases.
[0804] Folders...
The Folders dialog allows you to specify the file folders that PathAway
uses to look for Maps, Point, Route, and Track databases.
Maps...
Management of Maps. Shows list of maps. Options to edit map location
details, Display map, delete maps, beam maps to others.
Preferences...
Settings for options such as units of display, track recording options,
map display options, time estimation settings, alarm settings, and GPS
configuration.
Calibrate Map...
Adjust map location coordinates by selecting 2 known points on the
map. Map location is adjusted by distances between the two points, by
nudge controls, or by setting the top-left and bottom right longitude
and latitude coordinates.
About PathAway... Information about PathAway. Registration key entry.
Copyright 2004 Muskokatech
Page 30 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Goto Menu
Go to Start/End of Route
Moves location to the start or end of the active route.
Go to Start/End of Track
Moves location to the start or end of the active recorded
track.
World Map
Display built-in world map. This is the default view if no
maps are installed, or found at the current location.
Copyright 2004 Muskokatech
Page 31 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Context Sensitive Popup Menus
Tapping on PathAway screen brings up a context menu depending on the item selected. Tapping on
the map brings up the Map Popup Context menu. Tapping on a dashboard item brings up the
Dashboard Popup menu options.
Map Popup Menus
Tapping on the map brings up a context sensitive menu.
Tapping on an existing point will display the current
location coordinates, the closest point name, and a menu
of options.
The following menus are activated when the map is
tapped on, based on the condition. The menus are
organized into multiple layers for easy navigation. The
first menu is the Top Level.
Map Popup Menu - Top Level
Name
Description
Action
<Current Location>
Displays the geographic coordinates of the
selected location
Displays a screen showing
detailed information about the
location, such as distance to,
ETA to, etc.
<Closest Point>
Displays the name of the closest point, if
any
Displays a screen showing
detailed information about the
point, such as distance to, ETA
to, etc.
Edit...
Displays the Point Edit dialog for the
selected point.
Shown when a Point is selected.
Add Point
Adds the selected location to the Points
database. Calls up Edit Point dialog for
naming and selecting icon.
Shown when no point selected.
Add Route Pt
Adds selected location to the route.
Shown when there is an Active
Route, and location not on
route.
Copyright 2004 Muskokatech
Page 32 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Add Turn
Instruction...
Adds the selected location to the route and
flags it as a Turn point.
Note the "Intersection" icon is the indicator
of a Turn.
Shown when there is an Active
Route, and location not on
route.
Adjust Location
Allows adjusting the location of the
selected point by tapping it's proper
position on the map.
Shown when a Point is selected.
Delete Point
Deletes the selected point from the Points
database.
Shown when a Point is selected.
Map Popup Menu->Map Menu >
Contains location sensitive options for maps, such as
zooming, repositioning map, and choosing maps within
the boundaries of the location selected.
Name
Description
Action
<Closest Map>
Displays the name of the current map, if
any
none
Center Map
Centers map at selected location.
For all Taps.
Map Zoom In
Zooms into the next map under the
selected location.
For all Taps.
Map Zoom Out
Center map and Zoom out to the wider
area map.
For all Taps.
Overview Map
Displays the overview map.
Scale Zoom In
Expands the pixels of the current map to
show a close up view of the area.
Scale Zoom Out
Shrinks the pixels of the current map to
show a wider view of the area.
Scale 100%
Draws the map in its original scale.
Show/Hide Map
Remove the map from the screen or show
Copyright 2004 Muskokatech
Page 33 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
the current map if it has been hidden
Choose Map >
Go to the Maps dialog to choose other
maps not within the bounds of the selected
area. Same as selecting the main menu
Options - Maps...
Map Popup Menu->Map Menu>Choose Map >
Name
Description
(+) <Map Name>
Name of Map available to Zoom Into
(-) <Map Name>
Name of Map available to Zoom out to
Other Maps...
Displays the Maps dialog.
Copyright 2004 Muskokatech
Action
Page 34 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Map Popup Menu->Route Menu >
Shows the Routing options available at the current
location. If a Route Point is under the location clicked on,
then options for this point are shown.
Name
Description
<Route Name>
Displays the name of the current route, if any
Edit...
Displays the Point Edit dialog for the selected
route point.
Route Point selected.
Add Route Pt
Adds selected location to the route.
Shown when there is an
Active Route, and location
not on route.
Add Turn
Instruction...
Adds the selected location to the route and
Shown when there is an
flags it as a Turn point.
Active Route, and location
Note the "Intersection" icon is the indicator of
not on route.
a Turn.
Delete fm Route
Removes the specific point selected from the
active route. Point remains in point database
if there already.
Follow Forward
Activate the selected Route to follow from the
start.
Follow Reverse
Activate the selected Route to follow in
reverse order starting at end point of the
route
New Route
Create a new route
Routes
Go to the Routes dialog to choose other
Routes. Same as selecting the main menu
Options - Routes...
Copyright 2004 Muskokatech
Action
Route Point selected.
Brings up the New Route
dialog
Page 35 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Map Popup Menu->Other Points>
Name
Description
Action
<Points List>
Displays a list of points found in the the geographic
coordinates of the selected location
Displays a screen showing detailed
information about the location,
such as distance to, ETA to, etc.
<Closest Point>
Displays the name of the closest point, if any
Displays a screen showing detailed
information about the point, such
as distance to, ETA to, etc.
Add Point
Adds the selected location to the Points database.
Calls up Edit Point dialog for naming and selecting
icon.
No point selected.
Add Route Pt
Adds selected location to the route.
Shown when there is an Active
Route, and location not on route.
Add Turn Instruction...
Adds the selected location to the route and flags it
as a Turn point.
Note the "Intersection" icon is the indicator of a
Turn.
Shown when there is an Active
Route, and location not on route.
Edit...
Displays the Point Edit dialog for the selected point. Point selected.
Adjust Location
Allows adjusting the location of the selected point
by tapping it's proper position on the map.
Point selected.
Delete Point
Deletes the selected point from the Points
database.
Point selected.
Points...
Go to the Points dialog to choose other Routes.
Same as selecting the main menu Options Points...
Copyright 2004 Muskokatech
Page 36 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Map Popup Menu->Tracking Menu >
Shows the options available at the current location for the
Active Track Log. If a Track Log Point is under the location
clicked on, then options for this point are shown,
otherwise, only options for the Active Track log are
shown.
Name
Description
<Current Track Log>
Displays the name of the current track log.
Follow Forward
Activate the selected Route to follow from
the start.
Follow Reverse
Activate the selected Route to follow in
reverse order starting at end point of the
route
Suspend/Resume
Tracking
Suspends or Resumes recording positions to
the current track log.
Show/Hide Track Log
Shows or hides the current track log on the
map
Tracks...
Go to the Tracks dialog to choose other
Tracks. Same as selecting the main menu
Options - Tracks...
Copyright 2004 Muskokatech
Action
Page 37 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Dashboard Context Menus
Customizable Dashboard Options allow you to see the information you are most interested in. Each
of the PathAway screens can be customized differently. This allows you to quickly change to a view
most appropriate for navigating.
Tapping on a Dashboard item allows you to have different
information displayed at the dash location tapped on. If no
information is selected for a Dashboard, or there is no
information available, then a small bar is displayed.
Clicking on the bar will also bring up the Dashboard menu.
The following describes the Dashboard menu Options.
Name
Description
Hide
Removes the currently selected info from the selected Dashboard.
Set Font...
Set the primary font for the currently selected item. Brings up the
Set Font Dialog
Copyright 2004 Muskokatech
Page 38 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Dashboard Item - Set Font Dialog
Dashboard items all consist of 2 potential lines. Set the
font size desired for the Top and bottom lines of the
selected dashboard item.
Dashboard Tracking Info
Heading
Shows current Heading (course) direction.
Elevation
Shows current Elevation.
Speed
Shows current rate of speed.
Location
Shows current longitude/latitude position.
Trip Dist (odo)
Distance traveled since start of Trip (first GPS fix).
Elapsed Time
Elapsed time in minutes since start of Trip (first GPS fix).
Copyright 2004 Muskokatech
Page 39 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Average Speed
Average speed since start of trip.
Max Speed
Maximum speed obtained.
Vert Speed
Displays the vertical rate of climb or descent.
Proximity
Displays the proximity information to the closest point.
Dashboard - Routing Info
Displays information regarding the current Route being
followed. These items are only valid if following a route.
Off Track Warning
Displays distance and position off the route track.
Elevation Warning
Displays distance and position from the elevation recorded at the
current route position in the active route database.
Time to Dest (ete)
Estimated amount of time to reach destination.
Arrival Time (eta)
Estimated time of Arrival at destination.
Dist to Dest (dtd)
Distance to destination along route.
Heading Direct to Dest
Displays the heading direct to the route destination point.
Dist Direct to Dest
Displays the straight line distance direct to the route destination
point.
Follow Heading
Follow this course to reach next leg point.
Dist to Next Point
Distance to next route leg point.
Time to Next Point
Estimated time to reach next leg point.
Vert Dist to Next
Displays the vertical distance in elevation units to the next point
on the route.
Vert Angle to Next
Displays the vertical angle to the next point as expressed in
degrees
Heading on Next Leg
Heading to follow after next point in route is reached.
Dist of Next Leg
Distance to next leg point after next point.
Copyright 2004 Muskokatech
Page 40 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Time on Next Leg
Estimated time on next leg point.
Turn Instructions
Display Right-Left turn instructions. Activates when next point is
defined as an Intersection.
Time to Turn
Estimated time to reach next turn.
Dashboard - General Info
Map Name
Displays the current map name
Map Details
Displays the current map name, projection and datum type
Time
Current Time. Displays time from the Handheld, when not
connected to GPS. GPS UTC + time zone offset when connected
to GPS.
Date
Displays the current date
View Range
Map View range distance. Horizontal distance from left to right
side of screen.
Battery Status
Battery charge status expressed as a percentage %.
Free Memory
Displays the amount of available memory.
Customizing Screens
All of the screens contain a customizable dashboard. Each screen has a dashboard setup associated
with it. Here is how to customize the dashboard.
To Hide the Dashboard, choose the main menu select View, then Hide Dashboard. The screen will
look similar to the this:
Hide the Dashboard for large screen map viewing
Copyright 2004 Muskokatech
Page 41 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Choose the View menu option Show Dashboard to turn the dashboard back on.
You can also utilize the entire full view of the screen by turning the Top Toolbar off by selecting the
View menu and choosing Hide Toolbar.
To adjust individual dashboard items, simply tap the item
you would like to customize. The Dashboard Options
menu will appear showing the currently selected item and
the options to available to set for the dashboard.
When there is no active information available for a
dashboard control item, or the dashboard item is hidden,
only a bar will be displayed. Clicking on one of the bars
will bring up the dashboard menu.
Copyright 2004 Muskokatech
Page 42 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Toolbar Buttons
The top of the screen contains a set of tools designed for quick access to the most common
functions.
Toolbar:
Main Menu Bar. Press to bring up the Main Menu. Turns to hourglass when
drawing screen.
Connect/Disconnect GPS. When connected to GPS, turns to a Lock icon when
a GPS fix is obtained. Vertical bars shows # of satellites fixed on. Short dots
indicate # of satellites in view.
Add Point at location.
Toggle proximity alarm on/off.
Scale Zoom into current map by expanding the map.
Scale Zoom Out of the current map by shrinking the map.
Restore the map to 100% view. No Scaling is done for this view. If there is no
active map, this button will bring up a dialog allowing you to specify the desired
zoom range.
Map Zoom Out - no Map. There is no map available to Zoom out to. Pressing
this button will go to the virtual map view where no map is shown on the screen.
If there is no active map, this button performs a Scale Zoom Out.
Map Zoom In - no Map. There is no map available to Zoom In to. Pressing this
button will go to the virtual map view where no map is shown on the screen. If
there is no active map, this button performs a Scale Zoom Out.
Map Zoom Out - to another Map. When the Map Zoom Out button is
highlighted, it means there is a lower resolution map at the current location.
Pressing this button, will show this map on the screen.
Map Zoom In - to another Map. When the Map Zoom In button is highlighted, it
means there is a higher resolution map at the current location. Pressing this
button, will show this map on the screen.
Please note, moving between stacked maps should not be confused with map scaling where you
zoom into or out of a single map by expanding or shrinking the map. Map zoom moves between
layers of maps of different resolutions. Scale zoom expands or shrinks the current map.
Copyright 2004 Muskokatech
Page 43 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Hard Key Assignments
Hard key
1
Add
Point and
OK button
Hard key
2
Cycle
Screen
Views
Navigation
Hard keys
Zoom
In/Out
Hard key
3
Databases
Hard key
4
Connect/
Disconnect
GPS
Note some hard keys can also be used to press OK from a dialog.
New Trip Dialog OK key = Connect GPS hard key.
Edit Point OK key = Add Point button.
To override or disable the functions of these keys, go to the Preferences-Hard Keys dialog.
Copyright 2004 Muskokatech
Page 44 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Dialogs
GPS Menu
Options from the GPS menu bar.
Start New Trip...
For selecting route and track recording log before
beginning a trip. This dialog requires that you have
previously defined or recorded the routes or points you
are going to use for navigation.
Follow Track Forward or Follow Track Reverse:
Select the route to follow from the list of previously
created routes and recorded tracks.
Navigate to Point: Select a single point to navigate to.
Selecting this option will bring up the Point Selection
Dialog. Here you select the point to navigate to. Single
Point navigation differs from Route database navigation in
that only a single point is routed to. The Route line will
appear on the map directing you to straight to this point.
Copyright 2004 Muskokatech
Page 45 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Transportation Mode: Select the transportation mode
type. This enables you to easily identify trips of common
type
Record to Track Log: Turn on or off track recording.
Choose to create a new track log, or to add to the current
track database. If you choose new track, then all travel
stats will be reset. I.e.. Odometer, travel time etc.
Tip: This dialog is launched when you first connect to the
, you can
GPS. If you've connected using hard key 4
quickly accept the defaults (Follow last route, and record a
new track), by pressing hard key 4 again to begin
tracking with GPS.
GPS Configure
Setup for GPS device. Watch GPS input stream to ensure
communications is working properly.
Device Protocol:
This is the method that your GPS device uses for
communicating with other devices. Choose your type of
GPS device, or specify it's communications protocol.
NMEA is the most common protocol for serial
communications in use today. NMEA stands for National
Marine Electronics Association. PathAway supports version
2.0 or higher of NMEA-0183. Check your device for
specifications on interfacing with other devices. Some
devices have multiple interfaces that can be set. Ensure
that NMEA-0183 is set as the active communications
interface.
Port: Choose the port your GPS is connected to. Most
common is cradle port. This is the same port you use
when HotSync is selected. For information on how to
configure cables to connect your GPS device to your PDA, see the links in the GPS Sites page.
Baud Rate: The Baud rate is the speed in, bits per second, which data is transferred from the GPS
device. Some devices have a fixed baud rate, others can be selected on the GPS device itself.
Ensure that your baud rate on your GPS matches the selected baud rate here. Check your GPS
device manual for information on proper baud rate settings.
The most common baud rate for most GPS devices is 4800 BPS. Next is 9600, followed by 57,600.
Log GPS input: Used for debugging GPS communications. Checking this flag will record the GPS
communications stream to a log file.
Copyright 2004 Muskokatech
Page 46 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Connect: Begins communicating with GPS device. If communications are working properly, you
should see a stream of GPS information on the screen. When a "FIX" of your current position has
been determined, then the current longitude and latitude position will be displayed, along with type
of fix, number of satellites used for the fix, and total number of satellites in view.
Advanced GPS Options
The advanced options are settings that are uncommon to most GPS device configurations. Only
adjust these settings if you are having problems communicating with the GPS, or the specs for your
GPS require it.
Timer Comm: PathAway 3 implements Interrupt-Based communications to make the program
more responsive to user input while connected. This method is preferable if it works for the GPS
device. If you have been encountering difficulties with GPS connectivity, you can set PathAway to
use the "Timer-Based Communications" as in Version 2. To set "Timer-Based Communications":
turn ON the setting for "Timer Comm". This will set the program to communicate on a timer rather
than the new Interrupt based communications.
Parity, Bits, Stop bits: Serial communications settings. Most devices use N,8,1. Check your GPS
manual for proper settings.
View Menu Dialogs
Map Display Options
Control what layers are displayed on the maps.
Show Maps: Display maps on the navigation screen.
When not selected, navigation can be done by the virtual
map, which will still place your recorded points on the
screen based on the current zoom factor.
Auto Select Maps: When Show Maps is selected, this
option will automatically switch maps, when the position is
no longer over the current map. When this option is
checked, the zoom to No Map feature is not available if
there is at least one map at the current location.
Auto Zoom when connected: With this option on, the
map of the highest detail will automatically be chosen
while connected to the GPS.
User Gray for 4-bit maps: For color devices only. If you
have created or acquired 16 color (4-bit) maps, they can
be displayed in either 16 colors, or gray scale.
Show Tracks: Show the currently active track log line.
For color devices, the log is shown in blue. For gray-scale
devices, the track log is gray and identifiable by the points
that connect the lines.
Show All Enabled Tracks: Display all the available tracks on the device. This feature may cause
the screen to draw quite slowly, depending on the number of tracks in memory. This feature is
Copyright 2004 Muskokatech
Page 47 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
useful to see all the tracks you've traveled on. To select a track to follow, tap on one of the track
points and select Follow Forward, or Follow Reverse from the Tracks Menu > Popup.
Show All Enabled Routes: Display all the available routes on the device. This feature is useful to
see all the routes you've created. To select a route to follow, tap on one of the points in the Route
and select Follow Forward, or Follow Reverse from the Route Menu > Popup.
Show Active Route: Show/Hide the track line of the active route being followed.
Line to next point: Show/Hide the line from the current location to the next point.
Line to next turn: Show/Hide the line from the current
location to the next turn point.
Circle next point: Show/Hide the circle showing the
Route Target Proximity Radius around the target point.
See Preferences-Routes for more info.
Circle next turn: Show/Hide the circle showing the Route
Target Proximity Radius around the next turn.. See
Preferences-Routes for more info.
Show Points: Show the recorded point icons and/or
labels on the map screen.
Show Icons: Show the point icons. When you zoom out
you can specify the threshold when the icons are not to be
displayed. This is useful to avoid screen clutter when
viewing wide areas.
Show Text Labels: Show the point text labels. When you
zoom out you can specify the threshold when the text is
not to be displayed. This is useful to avoid screen clutter
when viewing wide areas.
Highlight Closest Point: Show label, distance to, and
pointer to the closest point in proximity.
Show Dashboard: Show or hide the Dashboard
Normal/Small/Large Text: Global setting to show text
in different sizes. When large text is selected, each font
on the dashboard is expanded by one size. When small
text is selected, each font is reduced by one size.
Show Toolbar: Show or hide the toolbar on the main
screens.
Copyright 2004 Muskokatech
Page 48 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options Menu Dialogs
Options->Routes
Route management dialog. Lists all of your routes. You
can create new routes, edit a route, or choose an existing
route to follow forward or reverse. The current Route you
are following is indicated in the rightmost column by an 'f'
for forward, or 'r' for reverse.
Select a Route to follow by highlighting a route in the list.
If the Map Display Preferences are set to "Show All
Tracks", then a check-box will appear beside each route.
Turn the check-box on to always display the route on the
map. Turn the check-box OFF to hide the route from the
display
Routes Dialog Buttons
New: Create a new route. Will launch the Route Database
Info Dialog.
Edit Points...: Add or Edit Route Points. Launches the
Point Record Management dialog.
Details...: For modifying the details of the route, such as
name, transportation mode, and individual points.
Launches the Route Database Details Dialog.
Follow Off:Clears the Follow flag on the selected route.
Follow Forward: Activate the selected Route to follow
from the start. As you travel, your current position along
the route will be displayed. Information such as ETA, Dist
to Next point, Distance to destination etc. can be
displayed.
Follow Reverse: Activate the selected Route to follow in
Copyright 2004 Muskokatech
Page 49 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
reverse order starting at end point of the route
Goto: Reposition the map to the start of the selected route
New: Create a new blank Route Database. Use the Edit Points option to add points to the route,
or add points via tapping points on the main screen (set the new route to be followed first).
Routes Dialog Menus
Name
Description
Database Menu
New
Creates a new route.
Edit Points...
Edit track records in the Points Record Dialog.
Duplicate...
Duplicates the selected track.
Join
Select the a route database, select the Join menu command. It will go back to the Route
database screen. Then you select the route you want to append to the previously
selected one. Press OK. The Join will be performed.
Delete
Deletes the selected route.
Beam...
Beam route database to another handheld device.
Move To...
Move route database to and from expansion card.
Send to GPS...
Send route to Garmin GPS device.
Get from GPS...
Download route directly from a Garmin GPS device.
Options Menu
Unsorted
No sorting.
Sort by Name
Sorts by name.
Sort by Date
Sorts by creation date.
Sort by
Transportation Mode
Sorts by selected transportation mode name.
Sort by Location
Sorts in order of closest proximity to current location.
Preferences
Launches Track preferences dialog.
Options->Routes->Details
Copyright 2004 Muskokatech
Page 50 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
For modifying the details of the route, such as name,
transportation mode, and individual points.
Name: Name of Route.
Add Points...: Add points to route. Launches the Point
Record Editor. Note: Route points can also be added from
the map view by selecting a point on the map and
selecting "Add to Route" from the menu.
Edit Points...: Modify the points in the route. Add new
points, delete points, or change order. Launches the Point
Record Management dialog.
Mode of Transportation:: Select the transportation
mode from the list. Icons can be created using PathAway
Icon Manager.
Options->Tracks
Lists of your recorded tracks. Choose a track to follow for
pinpoint accurate routing.
Manage your tracks by duplicating or joining tracks, and
transfer between Garmin GPS devices.
Copyright 2004 Muskokatech
Page 51 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Tracks Dialog Buttons
Follow: Selects the track as a route. Can follow tracks in
the order they were recorded forward or in reverse order.
An 'f' for forward or 'r' for reverse is displayed on the
track list indicating the track currently selected to follow.
Activate: Sets the selected track as the active track log.
The track is Displayed on the current navigation screen.
All subsequent position recording added to this track.
Goto: Repositions the location to the start of the currently
selected track. The track will not be displayed unless it is
the Active track, or is checked to show.
Edit Points...: Edit track points in the Points Record
Dialog.
Details...: Allows editing of the track name, mode of
transportation.
Close: Returns to the current navigation screen.
Tracks Dialog Menus
Name
Description
New
Creates a new track.
Edit Points...
Edit Track points. Brings up Database Record Edit Screen.
Duplicate...
Duplicates the selected track
Join
Select the a tracking database, Select the Join menu command. It will go back
to the Track database screen. Then select the track to append to the
previously selected one. Press OK. The Join will be performed.
Delete
Deletes the selected track
Beam...
Beam entire track database to another handheld device.
Move To...
Move database to and from expansion card.
Send to GPS...
Send track to Garmin GPS device.
Get from GPS...
Download track directly from a Garmin GPS device.
Options Menu
Unsorted
No sorting
Sort by Name
Sorts by name
Sort by Date
Sorts by creation date
Sort by
Sorts by selected transportation mode name.
Copyright 2004 Muskokatech
Page 52 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Transportation
Mode
Sort by Location
Sorts in order of closest proximity to current location
Preferences
Launches Track preferences dialog
Options->Tracks->Details
For modifying the details of the route, such as name,
transportation mode, and individual points.
Name: Name of Track.
Add Points...: Add points to track. Launches the Point
Record Editor.
Edit Points...: Modify the points in the track. Add new
points, delete points, or change order. Launches the Point
Record Management dialog.
Mode of Transportation: Select the transportation mode
from the list. Icons can be created using PathAway Icon
Manager.
Copyright 2004 Muskokatech
Page 53 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Points
Lists all points. Points may be stored in multiple
databases. Select a point to "Goto" on the map, edit point
information, delete, add new points.
Database: Select the point database to edit. Choose Edit
Databases to add, or modify entire Point databases.
Find: Searches for the next occurrence of the entered
point name.
New: Create a new point. Will launch the Point Edit
Dialog.
Up - Down Arrows: Moves the selected point up or down
in the list. Relevant only if the database is a Route or
track database.
Add to Route: Adds the selected point to the active
route.
Close: Closes the current dialog and returns to the
previous dialog.
Show: Shows the selected point on the navigation screen.
Add From...: Add points to current database from another point databases. A new list is displayed.
Choose the point to add and press OK.
Edit...: For modifying the details of the selected point, such as name, geographical coordinates,
description, and icon. Launches the Point Edit Dialog.
Points Dialog Menus
Name
Description
Point
New...
Creates a new point.
Edit Points...
Modify selected point details
Delete
Deletes the selected point.
Beam...
Beam entire point to another handheld device.
Move To...
Move entire point database to and from expansion card.
Send to GPS...
Send selected point or entire point database to Garmin GPS device.
Get from GPS...
Download points directly from a Garmin GPS device.
Options
New Database...
Copyright 2004 Muskokatech
Create a new Points database
Page 54 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Edit Databases...
Edit point database list
Add from other
Database...
Add points from other database to current database.
Split Database
Split database at current record.
Sort by Name
Sort by point name
Sort by Proximity
Sort points in order of closest location to current location
Sort by Icon
Sort by selected point icon name.
Database Details
Edit Database name and details.
Preferences
Launch Preferences...
Options->Points->Details
Edit point name, geographic location, description, and choose an icon to represent the point on the
map. This dialog is divided into sections: Info and Location. The point Info section is for specifying
information on the description of the point. The Location section holds the actual geographic
location data for the point.
Options->Points->Details->Info
Name: Name for the point. Maximum length is 79
characters. All characters except (commas and quotes)
are valid.
Note: Describe the point. Maximum length is 4000
characters.
Show on Map: Center the map on the current point.
Add to Route: Add point to current route.
Copyright 2004 Muskokatech
Page 55 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Point Icon Drop-down list:
Apply your own custom made icons to your points.
See Icon Manager for details on how to import your own
points.
Options->Points->Details->Location
Longitude/Latitude: Geographical coordinates for the
point. See Entering Longitude/Latitude coordinates for
specifying the top-left and bottom right coordinates of the
map.
Elevation: Altitude above sea level for the point.
Copyright 2004 Muskokatech
Page 56 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Tracks/Routes/Points>Get From GPS Device
For acquiring data from Garmin GPS devices.
Routes: Downloads all routes from GPS. Each route will
be downloaded to a unique route database.
Tracks: Downloads recorded track logs from GPS. Garmin
separates track logs into segments. The tracks can be
downloaded into a single track log containing all track
segments, or each segment can be placed in a separate
database.
Points: Downloads waypoints from GPS into selected
Points database.
Options->Tracks/Routes/Points>Send To GPS Device
For sending data to handheld GPS devices. This operation
is supported for only Garmin GPS devices in GarminGarmin Interface mode, and Magellan NMEA. Please
ensure that your GPS device is on and connected before
selecting this option.
Routes: Sends selected route to GPS. All points in the
route may be uploaded as waypoints linking to the route.
Tracks: Sends selected track to GPS as a track log.
Points: Sends points from entire Points database, or only
the currently selected point. Points are stored as
waypoints on the device.
Copyright 2004 Muskokatech
Page 57 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Maps
Lists all loaded maps. Choose display to show the map onscreen. Transfer maps between memory expansion cards.
Close: Returns to the current navigation screen.
Show: Displays currently selected map on the current
navigation screen.
Delete: Deletes the current map.
Details...: Allows editing of the map details.
Map Dialog Menus
Name
Description
Calibrate Map
Calibrate selected map to it's geographic coordinates.
Delete
Deletes the selected map.
Beam...
Beam maps to another device.
Move To...
Move maps to and from expansion cards.
Options->Maps->Details
Edit map information such as name, map type, and geographical coordinates, projection, and
datum. The map details dialog is divided into sections, Info and Calibration. The Info section
contains the information about the map. The Calibration section holds information on the map
coordinates.
Copyright 2004 Muskokatech
Page 58 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Maps->Details->Info
Name: Edit the name of the map. The format must be a
valid file name.
The folder name appears to the right of the Name prompt.
It is not editable. Use the Options->Maps->Database>Move To... option to move databases around folders.
Transportation Mode: The travel type the map is
intended for. Allows you to organize maps by type. I.e..
Aviation, boating, Hiking etc. Note, the transportation
mode data comes from the Vehicles.prc Icon database.
You can create your own types by editing this database in
the Icon Manager.
Options->Maps->Map Details->Calibration
The Calibration of the map requires three major components:
1.
2.
3.
Type of Calibration
Map Datum Information
Map Geographic Coordinates relative to the pixel image of the map
1. Calibration Type
PathAway allows the map to be defined by 3 different
types.
1.
2.
3.
Top-Left Bottom-Right.
Projection
3x3 Point
Copyright 2004 Muskokatech
Page 59 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
The Top-Left Bottom-Right coordinate system is a
simple rectangular map shape. All longitude lines are
perfectly vertical and all latitude lines are perfectly
horizontal. This type of map is accurate enough for maps
of small areas where the curvature of the earth is
insignificant. PathAway will also run much faster with this
system since no complex math is required to determine
plot points on the map. To calibrate maps of this type you
need to know only the top-left and bottom-right longitude
and latitude coordinates of the map.
See Entering Longitude/Latitude coordinates for specifying
the top- left and bottom-right coordinates of the map.
You can also calibrate the map right in PathAway using
the locations of two or more known points. See the
section on Calibrating Maps.
The Projection type of map employs maps defined using
specific named projections such as Lambert Conformal
Conic, UTM, and Transverse Mercator. All projected maps
require the library ProjLib.prc, and their appropriate
projection library. (except Lambert Conformal Conic,
which is built into ProjLib)
Refer to the Advanced Mapping Manual for more
information on specific projections and how to set
them up in PathAway.
Copyright 2004 Muskokatech
Page 60 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
The 3x3 map type is a non-rectangular map type
controlled by 9 coordinate positions on the map. Currently
these map types can only be generated and calibrated
using Touratech Desktop mapping software. See out
section on Touratech for more information
2. Map Datum
You can also specify the source map datum used by the
defined map. This allows you to convert coordinated of
different datums to display correctly on all maps. Refer
to the Advanced Mapping Manual for more
information on specific datums and how to set them
up in PathAway.
Copyright 2004 Muskokatech
Page 61 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Maps->Move To/From
Expansion Cards
From the a track/route/point or map database dialog.
Select the Move to... menu option.
Move or copy (Duplicate) databases to and from
expansion card.
Selected Database: Copy or move the currently selected
database to. If the database is on the expansion card, the
Option is to move from the card to Handheld main
memory.
All Databases: Copy All Databases To and From
expansion cards
Overwrite Existing: Delete and overwrite databases of
identical name found in the destination folder.
Options->Calibrate Map
Once maps have been transferred to the device, you can
fine-tune the map coordinates by matching the positions
of known points on the maps, with the actual position
displayed by the map. Resolution, and offset of the map is
adjusted. Or the map database can be edited and the topleft - bottom-right coordinates of the map can be
manually edited.
First you should select the map you are going to calibrate.
If the map to calibrate is not visible, go to the OptionsMaps dialog, and choose the map by it's name, and tap
the Show button.
To calibrate the map, select the Options-Calibrate Map
menu options. You will be shown a dialog with calibration
options.
Calibrate by known points: The easiest way to calibrate a map is to simply choose two points
where their geographical location (longitude-latitude) is already known. These may be points you've
already captured using your GPS.
Calibrate using Nudge Controls: Nudge Map Calibration controls are for making small
adjustments to the maps. They work best when you have a map and have recorded tracks with the
GPS and or have marked a few points. If the track doesn't exactly line up with a road, or points are
not right on the place they should be, you can use the nudge controls to "Line up" the maps with
the known points.
Copyright 2004 Muskokatech
Page 62 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Calibrate Manually: Manual calibration means simply setting the geographical (longitude-latitude)
coordinates of the map, using the Map Details dialogs.
Calibrate by known points
First you should select the map you are going to calibrate.
If the map to calibrate is not visible, go to the OptionsMaps dialog, and choose the map by it's name, and select
Show. To choose a map. The screen will be changed to
the Full Screen Map View. You are prompted to select
the first point.
Scroll the map to a position of known coordinates. I.e.
your home. Click on the map the location where the point
SHOULD be. This brings up the Points list.
Select the point that should be displayed at the selected
location. Press OK.
Copyright 2004 Muskokatech
Page 63 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Do the same for the second point. It is best to try to pick
two points that are as far away as possible. This gives the
map calibrator more data to perform the adjustments.
When you select the second point, the Points dialog
appears prompting for the name of the known location.
Choose this point and press OK. This will perform the map
calibration. The Map Details dialog will be displayed
showing the new top-left and bottom-right coordinates of
the map.
To accept the changes press OK. Your known points
should be displayed on the map in their correct locations
- To ensure that the two points you will use are correct,
physically go to the point, and capture the exact
coordinates of each point from the GPS. I.e.. Point 1 =
Corner Store, Point 2 = Home. If this is not possible, try
to determine the coordinates from a paper map, or
pinpoint them on an electronic map on the Web. I.e..
Mapquest.
- Select the Options-Calibrate Map menu options. The screen will be changed to the Full Screen Map
View. You are prompted to select the first point. Scroll the map to a position of known coordinates.
I.e. Corner store.
- Click on the map the location where the point SHOULD be. This brings up the Points list. Select the
point that should be displayed at the selected location. In this case, choose the Corner Store point.
Press OK.
- Do the same for the second point. I.e. Click where your home is on the map, then select the Home
point you captured earlier. Note. It is best to try to pick two points that are as far away as possible,
and not positioned horizontal or perpendicular to each other. This gives the map calibrator more
data to perform the adjustments. Once calibrated, your known points should be displayed on the
map in their correct locations.
Calibrate using Nudge Controls
When the option for calibrating using Nudge controls is
selected, the nudge control screen is shown.
Nudge moves adjusting the calibration of the map by
geographical coordinates. This amount of adjustment is
set by the nudge factor. The nudge factor is set in decimal
degrees.
This screen contains a number of buttons for adjusting the
coordinates of the map. As well, a nudge factor can be set
for adjusting the precision to which to move the map.
Adjusts the map towards the corresponding
direction by the given factor (nudge).
Adjusts the map in both directions horizontally or
Copyright 2004 Muskokatech
Page 64 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
vertically by the given factor.
Adjusts the map in both directions equally horizontally and vertically by the given factor.
Effect is to make the map appear to cover a larger or smaller geographical space.
Note if the geographical width is not exactly the same as the height, then the map sizing movement
will appear to be of different values horizontally and vertically, since the pixel coverage of a nautical
mile (degree lat or lon) is different between width and height.
Calibrate manually
Set the geographical (longitude-latitude) coordinates,
projection type, and datum of the map. See Map Details
for more information
Options->Point Databases
Lists of your points databases, Choose a point database to
make the active database for which new points will be
added to.
Manage point databases by duplicating or joining
databases, move to and from expansion cards, beam to
others, and transfer between Garmin GPS devices.
New: Create a new Point database.
Edit Points...: Edit points in the Points Record Dialog.
Close: Returns to the current navigation screen.
Details...: Allows editing of the point name.
Copyright 2004 Muskokatech
Page 65 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Point Database Dialog Menus
Name
Description
New
Creates a new point database.
Edit Points...
Edit points in the Points Record Dialog.
Duplicate...
Duplicates the selected database
Join...
Select the a point database, Select the Join menu command. It will go back to
the Point database screen. Then you select the database you want to append
to the previously selected one. Press OK. The Join will be performed.
Delete
Deletes the selected point database.
Beam...
Beam entire point database to another handheld device.
Move To...
Move database to and from expansion card.
Send to GPS...
Send point database to Garmin GPS device.
Get from GPS...
Download points directly from a Garmin GPS device.
Options->Folders
The Folders dialog allows you to specify the file folders
that PathAway uses to look for Maps, Point, Route, and
Track databases. By default, PathAway uses the following
Folders:
On first time startup, PathAway enumerates
the folders as follows:
1.
2.
Registers <Personal Folder>\PathAway folder.
The actual name of the <Personal Folder> is
resolved in the device registry. It is usually called
"\My Documents".
Searches and registers a "PathAway" folder in all
storage cards found. If the storage car does not
have a "PathAway" folder, it will be created, and a
Database volume is mounted. (PathAwayDB.csv).
This allows reading and writing of Tracks, routes,
and points on the card.
Subsequent startup:
1.
2.
Storage cards are not automatically searched for.
They must be registered via, the Options-Folders dialog.
Card Insertion/Removal. Will automatically register cards inserted while PathAway is in use.
Copyright 2004 Muskokatech
Page 66 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
•
•
\My Documents\PathAway (for device Memory)
\Storage Card\PathAway (for expansion cards)
Folders Dialog Commands:
Delete: Removes a folder from the Folder Enumeration list. PathAway will no longer search for
databases in this folder. Note, the \My Documents\PathAway folder cannot be removed.
Add...: Register a new folder. PathAway will look for databases in the new folders. Note, PathAway
does not search for databases in sub-folders.
Options-Folders-Add Folders
This dialog allows you to add and remove PathAway
folders. Simply Check the folders you want PathAway to
look for databases. Uncheck folders to remove them from
the enumeration list. Note, the \My
Documents\PathAway folder cannot be removed.
To view the sub-folders, press the + sign to the left of the
folder name.
New Folder: Create a new folder. Edit the folder name
inline, then tap outside the field to apply the name.
Options->Preferences
Settings for options such as units of display, track recording options, map display options, time
estimation settings, and GPS configuration.
Copyright 2004 Muskokatech
Page 67 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Preferences->General
Distance, Elevation, Volume, Course: General settings
for units of measure.
Position: Define the geographical coordinate display
format. Latitude/Longitude, UTM, or OSGB.
New Trip on Startup: Automatically run the New Trip
dialog when the program starts. Allows you to choose
your route instead of the program automatically starting
with the last used route and track log.
Stay on when Connected: Override handheld's auto
shutoff feature.
Options->Preferences->Time
Control how time-based estimates are calculated.
Time Estimates based on:
Recorded Track Speed: Report to the exact time it took
previously on a followed track. Applies only when
following a recorded track.
Average Speed: Estimates based on current average
speed.
Current Speed: Estimates based on current speed.
Custom Speed: Base time estimates on the specified
average speed.
Local time offset: Add or subtract time extracted from
GPS (Greenwich mean time).
GPS calculates Speed/Course: When On, use the
speed reported by the GPS device as the current speed
and course. When off, PathAway will calculate the current speed and course. This option is provide
because some GPS devices report course and or speed incorrectly.
Copyright 2004 Muskokatech
Page 68 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Preferences->Map
See View->View-Map Display
Options->Preferences->Tracking
Set track recording preferences. Allows you to Control
how often position data is logged to the Active Track
Database log.
Record Track History: Saves recorded GPS location to a
logging database while connected.
Track Data Size: Control how large the track file can get.
Record By Time
Record track log point at time intervals. Set to Constant
to record as often as the communications speed and
device performance will allow.
Record on Course Change only: Will only record track
points if the time precision has passed and a course
change has occurred since the last track was recorded.
Record While Moving only: Will only record track points if the time precision has passed and have
traveled the specified distance since the last track was recorded.
Record By Distance
Record track log point at distance intervals. PathAway will record a track point at specified distance
traveled markers.
Options->Preferences->GPS
See GPS->Configure GPS
Copyright 2004 Muskokatech
Page 69 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Preferences->Alarm
Have audible alarms sound when you reach points of
interest, or get off your route track. Set the distance
threshold for the proximity point, and choose from one of
the predefined alarm sounds.
All Alarms: Enable/Disable alarms
Off Track: Set the Off Track warning alarm distance, and
sound. This alarm will sound when you veer from the
specified track by the off track distance. The Off track
alarm will continue to sound every 30 seconds while offtrack. Press the alarm clock to test the sound.
Proximity 1 and 2: Proximity alarms can be set to alert
you at two separate proximity distances. Different sounds
can be set to notify you of when you are approaching
points. Proximity 1 is the early warning alarm. Proximity 2
is the Point approaching alarm.
Turn 1 and 2: Turn instructions can be created by setting a route point to be an Intersection (by
editing the route point and setting the Icon as the Intersection Icon). The Turn alarm settings will
sound as you approach turns.
Elevation: Defines vertical distance of track route you can get before Elevation too low, too high
warning is triggered. Route being followed must contain Elevation information.
Options->Preferences->Routes
Route Preferences. Define preferences for navigating
using routes.
Route Warnings
Off Track Warning: Defines distance to right or left of
route track you can get before Off-track warning is
triggered.
Elevation Warning: Defines vertical distance of track
route you can get before Elevation too low, too high
warning is triggered. Route being followed must contain
Elevation information.
Route Navigation
Follow Routes in Sequence: By Default, PathAway
targets the Next Route point by determining the closest route point in the direction of travel. This
might not be the most desirable method for navigation since, some routes my crisscross, or loop
back. Or perhaps, the route requires a grid pattern to be run. In this case, the Follow Routes in
Sequence can force PathAway to Target only the Next Point after the current target point, when it
reaches the Route Pt Proximity Radius.
Copyright 2004 Muskokatech
Page 70 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Route Pt Proximity Radius: This specifies the criteria for determining when a Route point target
has been reached. The wider the radius setting, the sooner the PathAway will move onto the next
route point target.
Manual Route Advance Only: In certain cases, it may be required that the Route target point be
advanced manually. If Manual Route advance is enabled, then PathAway will stay fixed on the target
route point until you specify Advance Route Target Point
Options->Preferences->Points
Preferences related to the display of points and naming of
new points.
In Proximity when within:
Defines the radius to search for points to display in
proximity list.
Auto Point Naming:
Define how new points are auto-named. Points can be
automatically named by geographical coordinate or be
incrementing numeric ids.
Options->Preferences->Colors & Lines
The Colors and Lines dialog allows you to to improve the
visibility of the navigation displays on the map. Select the
preferences category Color and Lines to activate this
dialog. Here you can change the way the lines and colors
on the maps are displayed. If you have a color device, you
can create easy-to-read contrast between your maps and
route and track lines. Experiment with this option until
you've found a view that suits you. You can even change
the look of the current Position Marker by selecting
between 3 different styles.
Active Route: Set the color and width of the Active route
line. Can set whether to show each route point mark as
well. Brings up Line Style dialog.
Other Routes: Set the color and width of the non-active
Route lines. These are shown when the preferences option
"Show All Tracks" is on. Can set whether to show each
route point mark as well. Brings up Line Style dialog.
Line to Next Point: Set the color and width of the line
from the current position to the next point on the route.
Copyright 2004 Muskokatech
Page 71 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
These are shown when the preferences option "Show All Tracks" is on. Can set whether to show
each route point mark as well. Brings up Line Style dialog.
Active Track: Set the color and width of the Active track log line. Can set whether to show each
track point mark as well. Brings up Line Style dialog.
Other Tracks: Set the color and width of the non-active Track lines. These are shown when the
preferences option "Show All Tracks" is on. Can set whether to show each track point mark as
well. Brings up Line Style dialog.
Dashboard Text/Background: Change the display color of the dashboard text and background.
Point Labels Text/Background: Change the display color and background of the point label text.
Options->Preferences->Colors & Lines->Line Style
[0804] The Line Style dialog displays the current style
for the chosen Line Type. Change the color by clicking on
the Color button, and the width of the line by pressing
either the + or - buttons beside the width label.
To have a circle drawn at each Route Point, check the
Show Points button.
When you are satisfied with the style, press the OK
button.
Copyright 2004 Muskokatech
Page 72 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Options->Preferences->Colors & Lines>Position Marker
[0804] The Position Marker is the Arrow or cursor in the
center of the screen. It represents your current
geographical position on the map. If you are navigating
with a GPS, it points in your direction of travel. If you are
disconnected and following a route, it will point in the
direction to the next point in the route. If no route is
being followed, you'll see only the cross-hairs.
You can set the style of direction pointer in the Position
Marker Style dialog. To do this, click on the Position
Marker button, from the Lines & Style Dialog.
In the Position Marker Style dialog, you can choose the
desired Direction Arrow style, color, and size of the
marker. For more emphasis on screen, set the 3d Effect
to create a shadow behind the marker.
Options->Preferences->Hard Keys
The Hard keys dialog allows you to to control the
function of the hard keys on the device. Select the
preferences category Hard Keys to activate this dialog.
Enable Hard Buttons: Check this item to enable the
hard buttons. Unchecking this button will disable the hard
buttons.
Enable Directional Buttons: Check this item to enable
the hard navigation buttons. Unchecking this button will
disable the hard buttons.
Copyright 2004 Muskokatech
Page 73 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Goto->World View
World view displays your location on a view of the world.
This feature is useful for easy scrolling to a relative world
location. You may zoom in by pressing the Zoom Scale In
a few times. This image map of the world is
button
very low resolution and will lose detail after zooming a few
times.
will highlight when you
The Map Zoom In button
position your location over an installed map. Press this
button, when it turns yellow, to go to the map in that
, then pressing
location. If this button is not highlighted
it will increase your resolution but will go to No Map view,
meaning no map will be displayed, but all tracks, routes
and points within this location will be. With PathAway, you
do not need maps to do navigation.
Entering Longitude/Latitude Coordinates
The geographical coordinates are specified vertical distance from the equator known as latitude, and
horizontal distance from the Central meridian over Greenwich England, known as longitude. These
coordinates are entered in one of these available formats:
Hemisphere CoordinatesLatitude coordinates north of the equator are prefixed by 'N' or a positive
number. Coordinates in the southern hemisphere are prefixed by 'S' or negative numbers.
Examples:
Hemisphere-Degrees-minutes:
N45 30.500, W79 30.500
* must be a space between degrees and minutes.
Hemisphere-Degrees-minutes-seconds:
N45 30 30.0, W79 30 30
* must be a space between degrees, minutes, and seconds.
Decimal degrees:
45.505, -79.505 or
N45.505 W79.505
* Latitude positive values specify Northern Hemishphere.
* Longitude positive values specify Eastern Hemisphere.
Entering UTM Coordinates
Copyright 2004 Muskokatech
Page 74 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
Universal Transverse Mercator (UTM) coordinates define two dimensional, horizontal, positions. The
sixty UTM zone numbers designate 6 degree wide longitudinal strips extending from 80 degrees
South latitude to 84 degrees North latitude. UTM zone characters are letters which designate 8
degree zones extending north and south from the equator. Beginning at 80° south and proceeding
northward, twenty bands are lettered C through X, omitting I and O. These bands are all 8° wide
except for bond X which is 12° wide (between 72-84 N). There are some zones that are of different
size. See the Map Projections manual for more info on UTM.
If you have set your preferences to UTM coordinates (see Options->Preferences->General), the
data is entered as follows:
Grid Zone:
Format: <Zone Number><Zone Letter Designator>
Example: 17T, meaning Zone Number 17, Designator T.
Northing:
Northing or vertical value specified in Metres within the Grid Zone.
Example: 5001954
Easting:
Easting or horizontal value specified in Metres within the Grid Zone.
Example: 0603881
Entering OSGB Coordinates
Ordinal Survey of Great Britain (OSGB) coordinates define two dimensional, horizontal, positions
within the area of Great Britain.
If you have set your preferences to UTM coordinates (see Options->Preferences->General), the
data is entered as follows:
Grid Zone:
Format: <Two Letter Letter Designator>
Example: ST
Northing:
Northing or vertical value specified in Metres within the Grid Zone.
Example: 02115
Easting:
Easting or horizontal value specified in Metres within the Grid Zone.
Example: 17353
Copyright 2004 Muskokatech
Page 75 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
PathAway Tools
Installing
Install PathAway Tools on your Windows PC, by running the Install program PathAway3Install.exe.
The install wizard will lead you through the steps of installing the software. Ensure the option for
PathAway Tools is selected. Once completed PathAway Tools will be installed on your computer in
the folder you specify and can be run from your Start-Programs menu.
Map Manager
Use the Map Manager to prepare maps for PathAway. The application is quite simple and straight
forward. To prepare a map follow these steps:
Ensure the map is in either Jpeg or BMP format.
Run the Map Manager.
To import a map, choose from the menu Map-Import Map. Select your map from the dialog.
The Map Manager will convert the image into the format necessary to display in PathAway.
Next, give the map a name, and set its color depth. The color depth must at least match your
device's. Most handheld devices support color depths that are equal to or less than the maximum
available on the device. I.e. if your handheld device supports up to 256 colors, then, 4-bit grayscale maps will work.
You can enter the longitude and latitude coordinates at this time, if you know them. If not, it is
sometimes easier to match them up to known geographical points. This is done once the maps are
transferred to the device. (See section on Calibrating Maps).
The position coordinates can be specified by one of the following methods:
1) By top-left and bottom right or,
2) By the map center coordinates, and the total distance covered by the map. Total distance is in
statute miles. To convert from nautical miles to statute miles, multiply nautical miles by 1.151. For
Kilometers to Miles, multiply kilometers by 0.621
When you're done, save the map by selecting File-Save Map As. You will be prompted to save it
with a .prc extension. You can also send the map directly to your handheld device.
For PalmOS, you can send the file to the device by selecting File-Send Map to PalmOS via
HotSync. Then, simply press the HotSync button to install the map on the Palm Powered™ device.
Copyright 2004 Muskokatech
Page 76 of 77
8/25/2004
PathAway GPS 3 for Windows Mobile - User Manual
For Windows Mobile, select the option File-Send Map to Windows Mobile Device... In this case,
ActiveSync must be running and connected to the handheld device.
For importing pre-calibrated maps, PathAway Map manager supports .jpr calibration, .cal format,
and PathAway's own PWM format. See the Advanced Map Converter manual for details on these
formats.
Icon Manager
The Icon Manager allows you to create your own custom icons to represent Points, or mode of
transportation icons.
If you haven't done so, download onto your PC, the sample icon and vehicle databases.
Once done, open up the Icon.prc file from the File-Open dialog. You'll see the list of icons already
in the database. Each name for an icon must be followed by a ",P" (comma P). This is an indicator
to PathAway that the image is a Point Icon. Similarly ",V" (comma V) indicates a vehicle icon.
Create your own icon using an application such as Windows Paint. Create an image no larger than
24 pixels wide by 14 pixels high. The average is 11x11. Save the file as a .BMP, or Jpeg.
Then, in the icon manager, choose Image-Add Image, and select the icon you just created.
That's it, now save the file, or send it to HotSync®. You're ready to use your new icon as a point.
Copyright 2004 Muskokatech
Page 77 of 77
8/25/2004