Download Nova 1.10 Getting Started

NOVA Getting started
Figure 4.9 – The Autolab control window can be used to set the bandwidth of the PGSTAT
The purpose of these different modes of operation is to provide a maximum
bandwidth, maintaining stability in the PSTAT or GSTAT control loop. The normal
mode of operation is High stability 46. This gives the Control Amplifier a bandwidth
of 12.5 kHz. The HSTAB indicator on the front panel of the PGSTAT and in the
Autolab display is lit when the High stability mode is active (see Figure 4.10).
Figure 4.10 – A HSTAB indicator is provided on the Autolab display
46
Power up default setting.
171 | P a g e