Download Mellanox OFED for Linux Release Notes
Transcript
Rev 2.3-1.0.1 9.8 System Time Known Issues Table 16 - System Time Known Issues Index 1. 9.9 Description Workaround Loading the driver using the openibd script when no InfiniBand vendor module is selected (for example mlx4_ib), may cause the execution of the /sbin/start_udev’ script. In RedHat 6.x and OEL6.x this may change the local system time. ConnectX®-3 Adapter Cards Family Known Issues Table 17 - ConnectX®-3 Adapter Cards Family Known Issues Index 1. 9.10 Description Using RDMA READ with a higher value than 30 SGEs in the WR might lead to "local length error". Workaround Do not set the value of SGEs higher than 30 when RDMA READ is used. Verbs Known Issues Table 18 - Verbs Known Issues Index 1. 9.11 Description Using libnl1_1_3~26 or earlier, requires ibv_create_ah protection by a lock for multithreaded applications. Workaround - Resiliency Known Issues Table 19 - Resiliency Known Issues Index 1. 2. 3. 4. 5. Description Reset Flow can run on XenServer 6 only after the active user space applications running verbs are terminated. SR-IOV non persistent configuration (such as VGT, VST, Host assigned GUIDs, and QP0-enabled VFs) may be lost upon Reset Flow. Upon Reset Flow or after running restart driver, Ethernet VLANs are lost. Restarting the driver or running connectx_port_config when Reset Flow is running might result in a kernel panic Networking configuration (e.g. VLANs, IPv6) should be statically defined in order to have them set after Reset Flow as of after restart driver. Workaround - Reset Admin configuration post Reset Flow Reset the VLANs using the ifup command. - - Mellanox Technologies 21