Download User Manual - Projector Central
Transcript
User Controls Power on Power on the projector. Refer to the “Power On the Projector” section on pages 22-23. Standby Power off the projector. Refer to the “Power Off the Projector” section on pages 22-23. Brite mode Increase the brightness of the image. IRIS Refer to “IRIS” function on page 44 for more information. ISF Day/ISF Night/User1/ User2/User3 Select the display mode. Refer to “Image--> Mode” section on page 27. Gamma There are 10 preset gamma curves. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output. Edge enhance There are 5 pre-set modes and one user mode for advanced edge enhancement filter. You can easily switch between the modes to achieve different effects. Color vivid There are 3 preset color management settings and one user definable setting. You can easily switch between the modes to achieve different effects. B/W Extension Black and White Extension can stretch the black and white levels to automatically increase the contrast of input image. Four Directional Select Keys Use to select items or make adjustments to your selection. Enter Confirm your item selection. Menu Press “Menu” to launch the on-screen display (OSD) menu. To exit OSD, Press ”Menu” again. V. Shift Shifts the projected image position vertically. Demo This function provides the user with a preview window where settings such as Edge Enhancement, Color Vividness and B/W Extension can be viewed. 27 English Using the Remote Control