Download SFRA45 - Isotest

SFRA45 User Manual
ZERO COMPENSATION
To compensate for long connection leads when making impedance
measurements, connect the cables to the instrument but leave
them disconnected from the DUT.
Ensure that the disconnected terminals are not touching anything.
Select the compensate option below and press ENTER.
compensate
In case you want to clear the compensation
Select the clear compensation option below and press ENTER.
clear compensation
(FRA) mode provides 0dB reference and dB calculation
information. It is useful when looking for changes in gain
under specific conditions such as where an attenuator -3dB
cut off point occurs in relation to the 0dB reference.
6-4