Download SET MODE

SET MODE
9
■ Miscellaneous (others) set mode (continued)
FM SPLIT Offset (HF)
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for HF bands in FM
mode only and is used to input the repeater offset for
an HF band.
-0.100MHz
-4.000MHz
Minus 0.1 MHz offset
(default)
Minus 4.0 MHz offset
-1.000MHz
+4.000MHz
Minus 1.0 MHz offset
(default)
Plus 4.0 MHz offset
ON
OFF
Split lock function ON
Split lock function OFF
(default)
ON
OFF
Automatic tuner start
ON
Automatic tuner start
OFF (default)
ON
OFF
Automatic PTT start
ON
Automatic PTT start
OFF (default)
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
FM SPLIT Offset (50M)
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for 50 MHz band FM
mode only, and is used to input the repeater offset for
the 50 MHz band.
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
SPLIT Lock
When this item is ON, the tuning dial can be used to
adjust the transmit frequency while pushing [XFC]
even while the lock function is activated.
See p. 32 for split frequency operation details.
Tuner (Auto Start)
The internal antenna tuner has an automatic start capability which starts tuning if the SWR is higher than
1.5–3.
When “OFF” is selected, the tuner remains OFF even
when the SWR is poor (1.5–3). When “ON” is selected, automatic tune starts even when the tuner is
turned OFF.
Tuner (PTT Start)
Tuning of the internal antenna tuner can be started
automatically at the moment the PTT is pushed after
the operating frequency is changed (more than 1%
from last-tuned frequency).
69