Download DS-5 Software Manual

Transcript
DS-5
Montages
The Chart screen can be changed to have traces with different combinations of screen position, amplitude
range, colours, etc. by choosing a Montage. There can be five montages defined, M1 to M5.
To apply a montage
- Click the montage icon M on the Tool Bar, highlight and click the required montage
Select Edit | Edit Montages to edit a montage
The Montage tab shows the montage (1 - 5) currently being edited. The current definitions are retrieved and
displayed in the dialogue box. The right hand side values (Heading etc) are those of the highlighted channel.
Edit | Edit Montages
•
•
•
Clicking the ‘Current’ button loads the settings from the currently opened screen into the selected
montage.
Clicking Save causes the montage to be validated and then saved.
Cancel abandons any changes and closes the dialogue box.
Note The Montage data is saved to Montage.ini.
26