Download Administrator Manual

3PS Network Server 3.0 System Administrator’s Manual
Add Devices on WAN or Other Local Area Networks
1. After selecting “Add Device Manually”, camera setting page will appear as below. The
most important settings are (1) Protocol, (2) Camera IP, (3) HTTP Port, and (4) User Name
& Password. Please fill in these fields required for 3PS Network Server to communicate
with the device.
3
3
2
1
Important Notice
If any of the said fields is incorrect, 3PS Network Server will not be able to connect the device.
When you have any device connection problem, please check these settings. However, at this
point, you may skip filling in the Device Name, Brand, Model, and Stream Mode configuration.
2. Click “Get Device Settings” to have 3PS Network Server contact the device and get the
live view. Once connected to the device, 3PS Network Server will get all the device
properties such like Brand, Model, Device Serial Number, Firmware Version. If the
device supports dual stream, Stream Mode selection field will reveal, you may select
different streaming mode and configure relative options. You may click “Cancel” button on
the top to abort setting this device or “Apply” to save it.

8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com