Download User`s Manual

Transcript
Introduction
Cha
pter 1
Chapter
Intr
oduction & F
ea
tur
es
Introduction
Fea
eatur
tures
Overview of Main Features
The board is a Dual FC-PGA Processors based motherboard. Measuring at 305mm
by 244mm this ATX board supports the fastest performing processors now available:
the Intel FC-PGA Pentium III “Coppermine.” Standard Front Side Bus options
include 66, 100 & 133MHz.
Teamed with the VIA Apollo Pro133A chipset is support for 4x SDRAM (DIMM)
modules and UltraDMA-66. Additionally for added functionality we has included the
versatile HPT 370 IDE controller to add UltraDMA-100 and IDE RAID.
The HPT370 PCI Dual Channel Ultra DMA/ATA 100 RAID Controller supports up to
4 Ultra DMA/ATA 100 disk devices with a burst transfer rate of up to 100MB/Sec.
The HPT370 is fully backward-compatible with all IDE/ATAPI devices – including
Ultra DMA/ATA 66, 33, EIDE Fast ATA-2, IDE drives and CD ROM drives. HPT
370 coexists with motherboard IDE ports, adding two additional IDE/ATAPI ports.
• Processor Support
The board is based on the Dual FC-PGA Pentium® III Processors. 66/100/
133MHz Front Side Bus with PPGA / FC-PGA socket 370 packaging. Single
PPGA/FC-PGA Socket370 Celeron processor may also be used.
• Chipset
Designed with VIA Apollo Pro133A (133MHz FSB) AGPset (694X + VT82C596B).
• Memory
Supports up to 2 Gigabyte of SDRAM (minimum of 32 MB) on board using PC100
memory and 1.5 GB using PC133. The board will support Error Checking and
Correcting (ECC) when using parity SDRAM memory modules. This will detect
multiple bit errors and correct 1-bit memory errors.
• Expansion Slots
Supports (1) 16 bit ISA slot, (5) 32 bit PCI slots, and (1) AGP slot. The board
2=CA%