Download Spaltfix S-350

Checks
1
3
2
1
2
Oil inlet screw
Oil drain screw
3
Oil sight glass
If this is the case, the hydraulic oil must be topped up immediately.
▪ See: Changing the hydraulic oil [➙ 27]
The oil filter only needs to be checked when the oil is changed.
9.6.2 Transmission oil level
1
3
2
1
2
Oil inlet screw
Oil level screw
3
Oil drain screw
If the oil seeps out of the hole of the oil level screw when the machine is on level ground,
the maximum oil level has been reached.
If the oil level is below the hole, this is the minimum oil level.
If this is the case, the transmission oil must be topped up immediately.
▪ See: Changing the transmission oil [➙ 28]
25