1
Download User Manual - Newegg.com
Transcript
4 Input/Output Settings Power Up Settings Wake Activation When Wake Activation Off is selected, the F1 button can be used to wake the scanner (see F1 Programmable Button on page 4-4). When Wake Activation On is selected, the scanner will wake when it senses activity, such as a cashier walking into the space where the scanner is located. Default = Wake Activation On. Wake Activation Off * Wake Activation On Wake Activation Sensitivity This allows you to set the sensitivity of the scanner when Wake Activation is being used. The sensor can be programmed to be more sensitive by selecting Far Distance, or less sensitive by selecting Close Distance. These indicate that moving near the scanner from a far distance would wake it, or only by moving close to it would it wake. Default = Far Distance. * Far Distance Close Distance Power Save Mode Power Save Mode allows you to automatically set the conditions under which the scanner idles, sleeps, and wakes up. When Off is selected, no power saving is used and the scanner remains powered on until the F1 button is pressed (see Sound Button on page 4-5). When Sleep Mode Only is selected, the scanner goes into sleep mode (all components are powered off) after the time interval set using Power Save Mode Timeout (page 4-2), during which there is no activity. When Idle, then Sleep Mode is selected, the scanner goes into idle mode (laser, motor, and micro are off) after the time interval set using Power Save Mode Timeout (page 4-2), during which there is no activity. After the same time interval has elapsed with no activity while the scanner is in idle mode, the scanner goes into sleep mode (all components are powered off). Note: When the F1 button is pressed, the scanner always goes straight to sleep mode. 4-1
