Download CIX6530 Wireless Remote I/O - Data

TM
CIX6530
Wireless Remote I/O
CIX6530 2.4 GHz Discrete/Analog Wireless I/O
Communication I/O eXtender Discrete/Analog
Features
• 12 bit analog resolution
• 256-bit AES encryption
• Expandable for future growth
The Data-Linc Group CIX6530 2.4 GHz I/O
Communication Interface I/O Extender offers the
ability to transmit discrete and analog signals with
robust, industrial wireless technology. This allows
wireless I/O communication between the Master and
one or more Remotes for a distance of a few feet to
many miles with implications for use in a variety
of industries. For convenience, any unit may be
configured as Master, Remote, Repeater or Repeater/
Remote. This not only simplifies replacement but
also reduces the number of units needed for “spare”
inventory.
The CIX6530 offers 12 bit analog resolution for
enhanced accuracy and resolution. It therefore
provides more precise monitoring and control,
allowing data collected at the input to be relayed and
reported with greater accuracy to the PLC or sensor.
Diagnostic LEDs provide confidence in the wireless
performance along with confidence provided by
256-bit AES encryption for enhanced security.
Each CIX6530 has a total of 24 independent
points—eight discrete inputs and eight discrete
outputs, as well as four analog inputs and four
analog outputs. Its SRM6x30 radio module reliably
relays data even in harsh industrial environments.
But in the event of a communications failure, the
output states of the discrete and analog channels can
be configured to retain the last known value or a predefined state.
The CIX6530 is ideal for fixed or mobile
installations. Its wireless component combines the
analog and discrete I/O extender with Data-Linc
Group’s SRM industrial grade license-free wireless
modems. With its updated features and expansion
TM
• 8 discrete inputs, 8 discrete
outputs, 4 analog inputs and
4 analog outputs
• 16 km (10+ mile) range– LOS
(line-of-sight)
• Single unit configurable as
Master, Remote, Repeater or
Repeater/Remote
• Easily upgradable to add Ethernet
and/or serial devices
• 100 mW EU version also available
• Optional DIN rail mounting
capability, the CIX6530 along with the CIX/EXR
expansion non radio Remote provides a simple to
implement, cost-effective solution for wireless I/O
signal transmission that ensures solid performance
and reliability in any RF environment. The
CIX6530 is backward compatible with both the
legacy CIX6500/R and the DAX6500.
The Communication Interface Extender goes
beyond standard I/O devices. If an expanding
network requires interfacing with Ethernet or serial
devices, the CIX6535 Ethernet or serial Master
modem may be added as the “head end”. The
CIX6535 Master's dual ports— an Ethernet or a
serial— allows it to connect to a PC or PLC to
easily upgrade your system, providing simplified,
low-labor startup, maintenance and growth for I/O
in both the 900 MHz (CIX6435) and the 2.4 GHz
(CIX6535) ISM license-free bands.
DATA-LINC GROUP 1125 12th Ave NW • Suite B-1 • Issaquah, WA 98027 • Phone: 425-882-2206 • Fax: 425-867-0865 • www.data-linc.com •
CIX6530 Specifications
License-free 2.4 GHz I/O Extender
Interfacing Diagram
I/O to I/O
Operating Frequency
License-free, 2.4 GHz ISM band
Included
CD Configuration software, User Manual
Antenna 0 dB bench test antenna
Other Programming Cable, Power Supply, Quick Start
Transmitter
Rated Range 10 miles (16 km), LOS
System gain 129 dB
Output Power 500 mW maximum,
27 programmable steps up to 500 mW (27 dBm)
100 mW EU version available
Modulation Spread Spectrum, GFSK
Spreading Code Frequency Hopping
Hop Patterns 15 (user selectable)
Occupied Bandwidth 230 KHz
Receiver
Sensitivity -105 dBm @ 115.2 Kbps for BER10-4;
-102 dBm @ 153.6 Kbps for BER10-6
Selectivity 20 dB at fc +/- 345 kHz
RF Data Transmission
Error Detection 32 Bit CRC
Data Throughput 115.2 Kbps - 153.6 Kbps
Data Encryption 256 bit AES
Interface
Analog 0-20mA, 4-20mA or 0-10VDC,
24VDC max. loop
Voltage 12-bit resolution, self powered-outputs
Discrete Inputs Dry contact closure
Discrete Outputs Open collector (sink to ground),
100mA per channel, 12-24VDC
Connections
I/O Discrete and Analog
Pluggable terminal blocks
Wire size 12-26 AWG
Power 3-pin pluggable terminal block
Diagnostic port RS232 DB9 Female
EX-Linc RS232 DB9 Female or RS485 2-wire
Indicators
General Power (P), Carrier Detect (C), RF Output
(O), RF Input (I), Comm Error
Discrete Activity LED for each discrete I/O
Power
Input Voltage 12-28VDC, wall mount 12VDC/
115-230VAC power supply included
Transmit Current 650mA@12VDC (8W)
Receive Current 100mA@12VDC (1.2W)
Operating Modes
Master, Remote, Repeater, Repeater/Remote
* Version also available without the radio
component for expanding I/O points at an
existing CIX Remote location.
Specifications subject to change without notice.
DATA-LINC GROUP & SmartSpectrum are trademarks of DATA-LINC GROUP.
©2014 DATA-LINC GROUP. All rights reserved.
CIX6530 (as a Master unit)
• Supports to up to 8 CIX6530 as Remotes.
• Each Master discrete input is replicated on each
Remote discrete output.
• Discrete inputs from one or more Remote units
are wired as active low to appear on Master
discrete outputs.
• Compatible with existing DDAA1000 8 bit mode
Remote devices (8 bit analog only)
• Analog outputs are mapped via configuration
software from Remote analog inputs (0 to 4 total)
CIX6530 (as a Remote unit)
• Remote analog inputs are mapped via setup to
Master analog outputs (0 to 4 total)
Antenna
Standard thread female SMA (for optional external omni
directional or yagi antennas)
Supplied bench test antenna Nominal Impedance 50 Ω 50Ω
Operating Environment
Temperature -40°F to 167°F (-40°C to 75°C)
Humidity 0 to 95% non-condensing
Enclosure
Standard 18 gauge steel
2.47 X 3.70 X 6.4 in. (6.274 X 9.398 X 16.26 cm)
Included Optional DIN rail mounting flanges (3)
Shipping Weight 1.8 lb (0.82 kg)
GE Fanuc
Corporate Headquarters
1125 12th Avenue NW
Issaquah, WA 98027 USA
[email protected]
Tel: (425) 882-2206
Fax: (425) 867-0865
www.data-linc.com
----------------------------P/N 155-09873-003 140212
--SE
TM
2.4 GHz CIX
Wireless I/O System
Communication Interface i/o eXtender
2.4 GHz Protocol to I/O Interface
Features
CIX Wireless I/O System
• 2.4 GHz ISM band, license-free ISM
• Range of up to 16 km (10 mi)
CIX 2.4 GHz Wireless I/O System
GENERIC
Data-Linc Group designed the Communication
Interface Extender (CIX) System specifically to offer
cost-effective, industrial grade wireless solutions that
interface with I/O devices. The CIX6530 is a longrange FHSS radio with connections for discrete and
analog inputs and outputs. The user can either use
these radios for I/O to I/O data exchange (mirroring)
by using the CIX6530 radios for the entire network,
or use the alternative option of an I/O to Protocol
solution implemented by using the CIX6530 I/O units
at the remote sites and Data-Linc’s unique CIX6535
protocol to I/O Master, a companion radio with serial
and Ethernet ports.
There are many advantages in having wireless modems
with an I/O interface. For example, they can extend I/O
signals to or from remote locations such as tank farms,
and they connect devices even if those devices do not
share a common communication protocol.
An I/O to I/O solution is a network where the signals at
a main location would be shared wirelessly with up to
another eight remote locations all using the CIX6530.
When using the I/O to Protocol system network, all the
I/O points at the CIX6530 Remotes are accessible via
the Ethernet port of the CIX6535 Master unit through
Ethernet/IP or Modbus TCP/IP, or via the serial port
using DF1 or Modbus RTU communication protocols.
This solution increases the capacity of the wireless
network by supporting up to 384 I/O points, spread
over a maximum of 16 remote locations. These options
are user selectable via the included configuration
software, which also allows the user to define the
desired state for the discrete outputs in case of a
communication failure.
TM
• SmartSpectrumTM technology for
maximum data integrity, even in noisy
environments
• AES 256 encryption
• Separate RS-232 DB9 port for
configuration
• User adjustable hop patterns and
frequency zones for refined operation
of close proximity networks
• Factory configured for easy installation
• CIX/EXR I/O expansion module available
• Optional DIN rail mount
(Note: 100 mW EU version also available)
CIX6535 I/O
to
Protocol
• One Ethernet port - Ethernet/IP and
Modbus TCP/IP compatible
• One serial port – DF1 and Modbus
RTU compatible
• Supports up to 16 CIX6530 Remotes
(I/O to Protocol solution)
• Backward compatible with CIX6400/M
CIX6530 I/O Interface
• Operates as Master (I/O to I/O only),
Remote, Repeater and Remote/Repeater
• 8 Discrete Inputs, 8 Discrete Outputs,
4 Analog Inputs and 4 Analog Outputs
• Backward compatible with CIX6500/R
and DAX6500
DATA-LINC GROUP 1125 12th Ave NW • Suite B-1 • Issaquah, WA 98027 • Phone: 425-882-2206 • Fax: 425-867-0865 • www.data-linc.com •
CIX 2.4 GHz Specifications
Diagram & Dimensions
License-free 2.4 GHz protocol & I/O modems
I/O to Protocol
Included
CD Configuration & diagnostics software, User Guide
Bench test antenna
Configuration cable
Power Supply
CIX6535 & CIX6530*
Transmitter
Rated Range 10 miles (16 km), LOS with
omni directional antennas
Output Power 500 mW maximum, 10 programmable
steps up to 500 mW (+27 dBm)
Modulation Spread Spectrum, GFSK
Spreading Code Frequency Hopping
Hop Patterns 15 (user selectable)
Occupied Bandwidth 230 KHz
(Note: 100 mW EU version also available)
Receiver
Sensitivity -105 dBm @ 115.2 Kbps for BER10-4;
-102 dBm @ 153.6 Kbps for BER10-6
I/O to I/O
Selectivity 20 dB at fc +/- 345 kHz
RF Data Transmission
Error Detection 32 Bit CRC
Data Throughput 115.2 Kbps
Data Encryption 256 bit AES
Antenna
Standard thread SMA female
Supplied bench test antenna Nominal Impedance 50 Ω
Operating Environment
Temperature -40 to 167°F (-40 to 75°C)
Humidity 0 to 95% non-condensing
Enclosure
Standard 18 gauge steel
2.47 X 3.70 X 6.4 in. (6.274 X 9.398 X 16.26 cm)
Included Optional DIN rail mounting flanges (3)
Shipping Weight 1.8 lb (0.82 kg)
CIX6535 Protocol to I/O Master Radio Modem
Interface
Ethernet port 10/100 Base-T Auto-MDIX
Serial port RS-232 - DB9 Female;
RS-485 - terminal block
Power
Input Voltage 10-28VD; wall mount 12VDC/115-230VAC
power supply included
Transmit Current 650mA@12VDC (8W)
Receive Current 100mA @12VDC (1.2W)
Operating Modes
Master only
Configuration Software
CIX-Linc software included
Diagnostics
Front Panel LEDs Power, RF Carrier, RF Out , RF In,
LAN (Link-Act), Mode LEDs x 4
Specifications subject to change without notice.
DATA-LINC GROUP & SmartSpectrum are trademarks of DATA-LINC GROUP.
©2014 DATA-LINC GROUP. All rights reserved.
CIX6530 I/O Interface Radio Modem
Interface
Analog 0-20mA, 4-20mA or 0-10VDC,
24VDC max. loop
Voltage 12-bit resolution, self powered-outputs
Discrete Inputs Dry contact closure
Discrete Outputs Open collector (sink to ground),
100mA per channel, 12-24VDC
Power
Input Voltage 12-28VDC, wall mount 12VDC/
115-230VAC power supply included
Transmit Current 650mA@12VDC (8W)
Receive Current 100mA@12VDC (1.2W)
Operating Modes
Master, Remote, Repeater, Repeater/Remote
Configuration Software
CIX-IO software included
Diagnostics
Front Panel LEDs Power, RF Carrier, RF Out , RF
In, LAN (Link-Act)
GE Fanuc
Corporate Headquarters
1125 12th Avenue NW
Issaquah, WA 98027 USA
[email protected]
Tel: (425) 882-2206
Fax: (425) 867-0865
www.data-linc.com
P/N ----------------------------155-09848-005 140211 --SE
TM
FastLinc FLC830E
802.11bg High-speed OFDM Ethernet Modem
Features
• Adapts to high-noise conditions
• Supports AES encryption
High-speed FLC830E Ethernet 802.11bg OFDM
• Features data prioritization
capability through QoS
• Reduces LOS issues and
minimizes multi-path fading
Data-Linc Group’s FLC830E, part of the FastLinc
Family of high-speed wireless, industrial Ethernet
modems provides an ideal data communication option for
installations requiring exceptionally fast data rates, as well
as those in high RF-noise environments. The FLC830E
replaces and is backward compatible with the FLC810E+
and the FLC820G and is superior in robustness and speed
compared to other 2.4 GHz products. .
It provides long-range capability—up to 14.5 km (9 miles)
line-of-sight (LOS), farther with Repeaters— and exceptional
speed (up to 54 Mbps) that supports data transfer on a single
network for real-time security/surveillance where SCADA
is also required. Additionally, it provides the user with
data prioritization through QoS (Quality of Service),
permitting user-adjusted preferential data service for
reduced data latency— the transmission time for a data
packet to travel from point A to point B.
The combination of these outstanding features has
produced a data communication product with exceptional
performance. The FLC830E is extremely robust and
reliable. The high speed and OFDM greatly enhance plant
floor performance by reducing LOS issues and multi-path
fading caused by RF reflection that can be particularly
troublesome for plant-floor data transfer— conditions
that constrain data rates and reliability in typical highspeed data systems. The FastLinc FLC830E also supports
modern encryption standards (AES, WPA, etc.) for
enhanced security.
The OFDM technology permits data transfer that supports
complex modulation and the resulting high data rates
with low latency. The advantages of the 802.11 speeds,
2.4 GHz band and immunity to multi-path fading permits
TM
• Offers long range data transfer—
up to 14.5 km (9 miles) LOS, farther
with Repeaters
• ETSI & CE Mark compliant
• Provides exceptionally high data
rates (up to 54 Mbps)
• IEEE 802.11bg compliant—
FLC810E, FLC810E+ and FLC820G
backward compatibility
the FLC830E to provide high data transfer rates while
maintaining excellent noise resistance and improved lineof-sight issues. For long distances, challenging plant-floor
LOS issues and high data rate needs, such as use as a
SAA-V* solution, supporting SCADA and real-time
video on the same network. The FLC830E along with
Data-Linc's unsurpassed wireless expertise makes this the
ultimate solution.
Typical Applications
• Security/surveillance audio/video
with SCADA
• High-noise environments:
• Arc welding
• High voltage
• Plant floor
• Variable frequency drives
* SAA-V - SCADA Alert Audio-Video on a single network
DATA-LINC GROUP 1125 12th Ave NW • Suite B-1 • Issaquah, WA 98027 • Phone: 425-882-2206 • Fax: 425-867-0865 • www.data-linc.com •
FLC830E Specifications
FLC830E Dimensions
Operating Frequency
License-free, 2.4 GHz ISM band
FCC 2.412-2.462 GHz (CH 1 - CH 11)
TELEC 2.412-2.472 GHz (CH 1 - CH 13)
ETSI 2.412-2.472 GHz (CH 1 - CH 13)
Included
CD User Manual
Antenna Test Antenna
Other Ethernet Cable, Power Supply,
Quick Start Guide
Transmitter
Maximum range standard LOS, directional antennas
14.5 km/9 miles @ 1 Mbps (802.11b)
10.5 km/6.5 miles @ 6 Mbps (802.11g)
1.2 km/0.75 miles @ 54Mbps (802.11g)
Maximum range EU
1.3 km/0.8 miles @ 1 Mbps (802.11b)
0.96 km/0.6 miles @ 6 Mbps (802.11g)
145 m/160 yd @ 54Mbps (802.11g)
RF Output Power 200 mW (23 dBm),
EU version < 100 mW (20 dBm)
Modulation CCK, OFDM
Spreading Code Direct Sequence
Channel 11 (USA) 13 (other countries)
Occupied bandwidth 5 MHz, 10 MHz or 20 MHz
Receiver Sensitivity
-74 dBm @ 54Mbps Rx Sensitivity (802.11g)
-93 dBm @ 6 Mbps Rx Sensitivity (802.11g)
-96 dBm @ 1 Mbps Rx Sensitivity (802.11b)
RF Data Transmission
RF Encryption AES, TKIP, WEP, WPA, WPA2
RF Data Rate 6, 9, 12, 24, 36, 48 or 54 Mbps
Operating Modes
Base Station, Station Adaptor and
Interbuilding Repeater
Data Throughput
1 Mbps to 20 Mbps
(Depending upon range and link quality)
Connections
Antenna Reverse polarity SMA connector, female,
50Ω
Ethernet 10Base-T/100 Base-T Auto-MDIX
Power 10-28 VDC, 3-pin pluggable terminal block
Indicators­­— Status LED’s including
Power
Status
LAN (Link-Act)
LAN (100)
WLAN
RSSI* in SA mode (5 stages)
Operating Environment
Humidity 0-90% non-condensing humidity
Working Temp -40 to 60º C (-40 to 140º F)
Enclosure
Standard 18-gauge steel with mounting flanges
Dimensions 7.6 x 5.6 inches (19.3 x 14.3 cm);
9.4 x 5.6 inches (23.9 x 14.3 cm) w/ mounting
flanges
Included Optional DIN rail mounting flanges (3)
Shipping Weight appx 1.8 lb (0.82 kg)
*Receiver Signal Strength Indicators
FastLinc is a trademarks of DATA-LINC GROUP. Specifications subject to change without notice.
©2014, DATA-LINC GROUP. All rights reserved.
About DATA-LINC GROUP
Since 1988, Data-Linc Group has provided
reliable communication solutions for industrial
automation systems. As a Rockwell Automation, Global Encompass Partner, Data-Linc
provides a solution based approach thanks
to its long-time experience with Allen Bradley
devices such as PLCs, HMIs, etc. Data-Linc's
products use industry proven RF technologies that have been successfully applied in all
major industries worldwide, including automotive plants, paper mills, consumer goods,
manufacturing/packaging, oil & gas refineries
and pipelines, utilities, moving platforms and
transportation systems— underground, offshore and above ground, Data-Linc meets the
challenge.
Alliance Partners
GE Fanuc
Corporate Headquarters
1125 12th Avenue NW
Issaquah, WA 98027 USA
[email protected]
Tel: (425) 882-2206
Fax: (425) 867-0865
www.data-linc.com
----------------------------P/N 155-09855-007
140212 --SE
TM
SRM6130
Long-range 2.4 GHz FHSS Serial Radio Modem
Features
• License-free 2.4 GHz ISM band
2.4 GHz Long-range FHSS Serial Radio Modem
• Range up to 24 km (15 miles)
• SmartSpectrumTM technology for
maximum data integrity in noisy,
industrial environments
• RS-232/RS-485 data ports
Data-Linc’s 2.4 GHz serial member of the
SmartSpectrumTM Radio Modem Family, the
SRM6130, offers a license-free serial modem with
superior reliability, versatility and performance
for wireless data communication. This latest
version provides improved hardware, such as a
faster processor, while maintaining Data-Linc's
commitment to backward compatibility with its
corresponding legacy version, the SRM6100
Like its predecessors, the SRM6130 serial radio
modem employs FHSS (Frequency Hopping
Spread Spectrum) technology with proven data
communication reliability, in the 2.4 GHz ISM
frequency band. Data-Linc's robust modem allows
customers to implement a proprietary wireless
network in high RFI/EMI environments with
the benefit of confidence in unsurpassed data
communication integrity, including areas of existing
wireless infrastructure.
The SRM6130 is software configurable and has
a separate DB9 serial port for independent access
to configuration software. Data-Linc’s proprietary
ConfigLincTM software, that is included with the
SRM6130 modems, simplifies modem setup and
configuration— executed via the dual serial ports
(RS-232 or RS-485).
As with all members of the SRM Family of licensefree radio modems, the SRM6130 supports both
point-to-point and point-to-multipoint network
TM
• AES 256 bit Encryption
• Separate RS-232 DB9 port for
configuration
• Operates as Master, Remote, Repeater
or Repeater/Remote
• User adjustable hop patterns and
frequency zones for refined operation of
close proximity networks
• Replacement for any legacy
SRM serial modem
• Factory or field configured for easy,
trouble-free installation
• Optional DIN rail mounting
topologies with a virtually unlimited number of
radios. Each modem can be individually configured
as Master, Remote, Repeater or Repeater/Remote
using the included Config-LincTM software.
Additionally, the SRM6130 provides not only
superior security through AES-256 encryption
but also offers a long distance range of 10 miles
(16 Km) with line-of-sight, farther with Repeaters
and/or high gain antennas. The combination of
features and benefits supplied by the SRM6130
serial modem continues to support Data-Linc's
well-earned reputation for superior reliability,
versatility and performance for wireless industrial
data communication.
DATA-LINC GROUP 1125 12th Ave NW • Suite B-1 • Issaquah, WA 98027 • Phone: 425-882-2206 • Fax: 425-867-0865 • www.data-linc.com •
SRM6130 Specifications
SRM6130 Dimensions
Operating Frequency
License-free, 2.4 GHz serial radio modem
Included
CD SetLinc TM configuration software
Test antenna
Power supply
User Guide
Transmitter
Rated Range 15 miles (24 km), LOS with omni
directional antennas
Output Power 500 mW maximum, 10 programmable steps up to 500 mW (+27 dBm)
(Note: 100 mW EU version available)
Modulation Spread Spectrum, GFSK
Spreading Code Frequency Hopping
Hop Patterns 15 (user selectable)
Occupied Bandwidth 230 KHz
Receiver
Sensitivity -105 dBm @ 115.2 Kbps for BER10-4;
-102 dBm @ 153.6 Kbps for BER10-6
Selectivity 20 dB at fc +/- 345 kHz
System Gain 132 dB
RF Data Transmission
Error Detection. 32 Bit CRC
Data Throughput 115.2 Kbps
Data Encryption 256 bit AES
Interface
RS-232/RS-485 Data ports
RS-232 Separate configuration port
Antenna
Standard thread SMA female
Supplied bench test antenna Nominal Impedance 50 Ω
Power
Input Voltage 10-28 VDC; wall mount
12 VDC /115-230 VAC power supply included
Transmit Current 650 mA @ 12 VDC (8 Watts)
Receive Current 100 mA @ 12 VDC (1.2 Watts)
Operating Modes
Master, Remote, Repeater, Repeater/Remote
Configuration Software
Note: Mounting bracket can be mounted
in 4 positions on end plate for multiple
mounting options.
Alliance Partners
Config-Linc software included
Diagnostics
Front panel LEDs Power, RF Carrier, RF Out, RF
In, LAN (Link-Act), Mode LEDs x 4
Operating Environment
GE Fanuc
Temperature -40o to 167o F (-40o to 75o C)
Humidity 0 to 95% non-condensing humidity
Enclosure
Standard 18 gauge steel
2.47 X 3.70 X 6.4 in. (6.274 X 9.398 X 16.26 cm)
Included Optional DIN rail mounting flanges (3)
Weight 1.8 lbs (.82 kg)
Specifications subject to change without notice. ©2014, DATA-LINC GROUP. All rights
reserved. SmartSpectrum are trademarks of DATA-LINC GROUP.
All other trademarks are the property of their respective owners.
Corporate Headquarters
1125 12th Avenue NW
Issaquah, WA 98027 USA
[email protected]
Tel: (425) 882-2206
Fax: (425) 867-0865
www.data-linc.com
----------------------------P/N 155-09844-004
140210 --SE
TM
SRM6330
Long-range 2.4 GHz FHSS Ethernet Radio Modem
Features
• 2.4 GHz license-free ISM band
• Range of 10 miles (16 km)
2.4 GHz Long-range FHSS Ethernet Radio Modem
• SmartSpectrumTM technology for
maximum data integrity, even in
noisy environments
Data-Linc’s license-free SRM6330 Ethernet radio
modem offers exceptional reliability, versatility
and performance for Ethernet wireless data
communications. This latest version offers improved
hardware with a faster processor, while maintaining
Data-Linc’s commitment to backward compatibility
with its corresponding Ethernet legacy SRM6320,
SRM6310E and SRM6300E versions.
Like its predecessors, the SRM6330 Ethernet radio
module employs SmartSpectrumTM FHSS (Frequency
Hopping Spread Spectrum) technology. Along with
operating in the 2.4 GHz ISM frequency band,
customers benefit by the assurance of an ultra reliable,
robust, proprietary wireless network with the benefit of
exceptional data integrity even in noisy high RFI/EMI
environments– including areas with existing wireless
infrastructure.
The SRM6330 is software configurable. Data-Linc’s
proprietary SetLincTM software, that is included with
the SRM6330 modems, simplifies modem setup and
configuration. The 10/100 Auto-MDIX Ethernet ports
not only support data transfer but also provide access
for the configuration software. Configuration is also
available via a separate DB9 serial port. For remote
sites, web configuration is also an option. For customer
convenience and first-line diagnostics, the front panel
includes LED status lights that provide direct access to
critical information.
As with all members of the SRM Family of license-free
SmartSpectrum Radio Modems, the SRM6330 supports
both point-to-point and point-to-multipoint network
topologies and a virtually unlimited number of radios.
Each modem can be individually configured as Master,
Remote, Repeater and Remote/Repeater, through the
included SetLincTM software.
TM
• 10/100 Auto-MDIX Ethernet port
• AES 256 encryption
• RS-232 DB9 configuration port
• Configurable as Master, Remote,
Repeater and Remote/Repeater
• User adjustable hop patterns and
frequency zones for exceptional
performance in close proximity networks
• Replaces any legacy 2.4 GHz Ethernet
SRM series radio modem
• User assignable IP address
• Factory custom-configured for easy,
trouble-free installation
• Optional DIN rail mounting
The SRM6330 not only provides superior security through
AES 256 encryption but also offers a long-distance range
of up to 10 miles (16 km) with line-of-sight, farther with
Repeaters and/or high gain antennas.
Applications
• PLCs on mobile equipment— stackers,
•
•
•
•
reclaimers, overhead cranes, etc.)
SCADA systems— water/wastewater,
power, oil & gas, etc.
Underground and off-shore
communications
Networks in high RFI/EMI environments
Telemetry
DATA-LINC GROUP 1125 12th Ave NW • Suite B-1 • Issaquah, WA 98027 • Phone: 425-882-2206 • Fax: 425-867-0865 • www.data-linc.com •
SRM6330 Specifications
SRM6330 Dimensions
Operating Frequency
License-free 2.4 GHz Ethernet radio modem
Included
CD SetLinc TM configuration software
User Manual
Test antenna
Ethernet CAT-5 cable
Power supply Wall mount 115-230 VAC supply, 12
VDC output
Transmitter
Range 10 miles (16 km) with LOS & omni antennas
Output Power 500 mW maximum, 10 programmable steps up to 500 mW (+27 dBm)
(Note: 100 mW EU version also available)
Modulation Spread Spectrum, GFSK
Spreading code Frequency Hopping
Hop Patterns 15 (user selectable)
Occupied Bandwidth 230 KHz
Receiver
Sensitivity -105 dBm @ 115.2 Kbps for BER 10-4
-102 dBm @ 153.6 Kbps for BER 10-6
Selectivity 20 dB at fc +/- 345 kHz
System Gain 132dB
RF Data Transmission
Data Throughput 115.2 Kbps – 153.6 Kbps
Error Correction 32 bit CRC
Data Encryption 256-bit AES
Interface
10/100 Auto-MDIX Ethernet port
Serial Port RS-232 – DB9 female
RS-485 – terminal block
Antenna
Standard thread SMA female
Supplied bench test antenna
Nominal Impedance 50 Ω
Power
Input Voltage 10-28VDC. Wall mount 12VDC/
115-230VAC power supply included
Transmit Current 650mA@12VDC (8W)
Receive Current 167mA@12VDC (2W)
Operating Modes
Master, Remote, Repeater, Remote/Repeater
Configuration Software
SetLinc TM included configuration software
Diagnostics
Front panel LEDs Power, RF Carrier, RF Out, RF In,
LAN (Link-Act), Mode LEDs x 4
Operating Environment
Temperature -40º to 167º F (-40º to 75º C)
Humidity 0 to 95% non-condensing
Enclosure
Standard 18 gauge steel
2.47 X 3.70 X 6.4 in. (6.274 X 9.398 X 16.26 cm)
Included Optional DIN rail mounting flanges (3)
Weight 1.8 lb (0.82 kg)
Specifications subject to change without notice. DATA-LINC GROUP and
SetLinc are trademarks of DATA-LINC GROUP. ©2014. All rights reserved.
Note: Mounting bracket can be mounted
in 4 positions on end plate for multiple
mounting options.
Alliance Partners
GE Fanuc
Corporate Headquarters
1125 12th Avenue NW
Issaquah, WA 98027 USA
[email protected]
Tel: (425) 882-2206
Fax: (425) 867-0865
www.data-linc.com
----------------------------P/N 155-09846-004
140210 --SE