Download Version 1.1 - partirentournee

Cur.t. --- Current fixture temperatures.
boAr.-Current temperature on the PCB in the fixture.Temperatures below 85°C are not critical.
82° C and more lead to the lamp being switched off and the fixture goes to "low power mode".Before
switching the lamp on again (after 5 minutes),run a total fixture reset.
HEAd-Current temperature of the fixture head inside.Temperatures below 75°C are not critical.
70° C and more lead to the lamp being switched off and the fixture goes to "low power mode".Before
switching the lamp on again (after 5 minutes),run a total fixture reset.
Hi.tE. --- Maximum fixture temperatures.
boAr. - The function shows the max.temperature on the PCB since the ColorMix 575 AT has been
fabricated.
HEAd - The function shows the max.temperature of the fixture head inside since the ColorMix 575
AT has been fabricated.
rSEt --- Maximum resetable temperatures.
boAr. - The function shows the maximum temperature on the PCB since the counter was last reset.
In order to reset the counter to 0 you have to hold [UP] and[DOWN] and press the [ENTER].
HEAd - The function shows the maximum temperature of the fixture head inside since the counter
was last reset.In order to reset the counter to 0 you have to hold [UP] and [DOWN] and press the [EN
TER].
DM.In.--- Readout of DMX values.Select this function to read DMX values (0-255) of each channel received by the fixture.
Func. a special function
C.SPd. a CMY/dimmer speed
Macr. CMY macros
EFFE. an effect wheel
Colo. a colour wheel
Zoom a zoom
Col.F. a colour fine
F.Zom. a fine zoom
CYAN cyan lamellas
Stro.
a strobe/shutter
MAGE. magenta lemellas
dimr
a dimmer
YELL. yellow lamelas
F.dim. a fine dimmer
VErS. --- Software version.Select this function to read the software version of processors:
IC1.r.--- Processor 1 on the right side board of the fixture
IC2.r.--- Processor 2 on the right side board of the fixture
IC3.r.--- Processor 3 on the right side board of the fixture
IC1.L. --- Processor 1 on the left side board of the fixture
Right side board with
processors
Left side board
with processors
Temperature measuring
point on the PCB
21