Download User`s Manual

250-0249r6.qxp
30
10/1/2004
9:06 AM
Page 30
Operation
C1RGD drive startup
To start the drive
1. Turn the speed adjust potentiometer full CCW.
2. Set the FWD/REV switch to the desired direction.
3. Set the RUN/BRK switch to BRK.
4. Set the POWER switch to ON (up). The POWER ON indicator
will light.
5. Set the RUN/BRK switch to RUN. Slowly turn the speed adjust
potentiometer clockwise until the desired speed is reached.
C1RGD drive shutdown
To quickly decelerate the motor from set speed to a stop, set the
RUN/BRK switch to BRK. To coast the motor from set speed to a
stop, set the POWER switch to OFF (down).