Download USER`S MANUAL

3. Orient the Rear Stabilizer (9) as indicated by the
sticker.
3
While a second person lifts the rear of the Frame
(1), attach the Rear Stabilizer (9) to the Frame
with two M10 x 68mm Screws (34).
9
1
34
4. Orient the Upright (2) and the Top Shield (41)
as shown. Slide the Top Shield upward onto the
Upright. Do not remove the wire ties from the
Upright.
4
Wire Ties
Next, slide the Upright (2) onto the Frame (1).
Attach the Upright (2) with four M10 x 20mm
Screws (40), an M10 x 74mm Bolt (7), and an
M10 Locknut (33). Do not tighten the Screws
and the Bolt yet.
2
41
40
40
33
7
1
8
40