Download DVR User Manual

Transcript
DDR-04 / DDR-08 / DDR-16 User’s Manual
4. Main
Setup
Guide
MainMenu
menu setup
guide
Click right mouse or press ESC button on the front panel, the control bar will display on the screen, refer to Fig 4-1:
Full channel switch, camera 1 ~ 4 or camera 1 ~ 8, camera 1 ~ 16
①
②
1
2
3
4
5
6
7
8
9
③
④
⑤
⑥
⑦
⑧
Single
Multi
E-Zoom
Audio
PTZ
Record
Playback
Main Menu
Dwell
Full channel
4ch:1/4, 8ch:1/4/9, 16ch:1/4/9/16
Live/playback digital zoomx2
Audio channel setup and volume
Into PTZ control mode
Manual record
Playback the nearest file
Into main OSD
Channel sequence(only 16CH)
Fig 4-1 main menu toolbar
Click Menu
button, the interface will pop-up as Fig 4-2; press MENU button on the front panel or operate with
remote controller also can display the main menu.
Main OSD
Fig 4-2 system setup
4.1 Basic configuration
Basic configuration includes three sub menus: system、date& time and DST.
4.1.1 System
Step1: enter into system configurationbasic configurationsystem; refer to Fig 4-3:
Fig 4-3 basic configuration-basic
Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA
resolution and language. The definitions for every parameters display as below:
Device name: the name of the device. It may display on the client end or CMS that help user to recognize
the device remotely.
Video format: two modes: PAL and NTSC. User can select the video format according to that of camera.
Password check: enable this option, user needs to input user name and password can do corresponding
operations with the relevant right in system configuration.
Show time: display time in live.
11
R201401-V29