Download - Hikvision

DS-9000/9600 Series HDVR/NVR User‟s Manual
Configuring Privacy Zones
1. Enter the Privacy Zones menu, shown in Figure 57 by going to Main Menu > Camera Setup >
Privacy Zones.
Figure 57 Privacy Zone Menu
2. Select the camera to setup privacy zones in using the camera drop down menu on the upper left of
the menu. If all cameras are to be configured with the same settings, select All Cameras from the
list.
3. Click Enable Privacy Zones.
4. Up to four privacy zones can be used per camera and are shown using four different colors,
yellow, green, blue and pink. Using the mouse, click and drag out rectangular boxes defining the
desired zones.
5. You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or
Clear All button to clear all zones.
6. Select the Save button to save the privacy zones settings and select Exit to return to the previous
menu. Selecting the Exit button without clicking Save will quit out of the menu without saving
settings.
Configuring Video Tampering Detection
Video tampering detection can be used to recognize if an area of a camera is purposely covered and to
respond accordingly.
To configure video tampering detection:
1. Enter the Video Tampering Detection menu, shown in Figure 58 by going to Main Menu >
Camera Setup > Video Tampering Detection
.
69