Download IP Module User Manual

IP Module User Manual
This process is not reversible and might take some minutes. Make
sure the IP MODULE's power supply will not be interrupted during
the update process, because this may cause an unusable card.
■ Thirdly, after the firmware has been stored, the panel will request you to
reset the IP MODULE manually. Half a minute after the reset, the IP
MODULE will run with the new firmware version and should be accessible.
However, you are requested to login once again.
The three-stage firmware update process and complete
consistency check are making a mistake in updating the firmware
almost impossible. However, only experienced staff members or
administrators should perform a firmware update. Make sure the IP
MODULE's power supply will not be interrupted!
5.6.4 Unit Reset
Figure 5-34
Unit Reset
This section allows you to reset specific parts of the device. This involves the
both keyboard and mouse, the video engine and the IP MODULE itself.
Resetting the card itself is mainly needed to activate a newly updated firmware.
95