Download LED Crystal Magic Ball Light

Instruction Manual
LED Crystal Magic Ball Light
LED Cr ystal Magic Ball Light Instruction Manual
LED Crystal Magic Ball Light is advanced LED Technology, with compact plastic shell,
delivering 34 razor sharp powerful beams. Project light beams on the wall just like a mirror
ball effect, 2 DMX channels, speed control. Three control mode, DMX, Master/slave and
sound active. Stand alone and rotating via dip switch. Advanced LED technology, creating
powerful beams similar to a 150W discharge lamp. Extremely long lift (rated 100,000 hrs),
no need to change lamp. Very low power consumption, no duty cycle runs all light.
Very compact shell, perfect using for discos, clubs pubs, parties.
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the equipment.
• Never let the power-cable come into contact with other cables. Handle the power-cable
and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not connect this equipment to a dimmer-pack.
• Do not switch the equipment on and off in short intervals, as this will reduce the system's life.
• Only use the equipment indoors.
• Do not expose to flammable sources, liquids or gases.
• Always disconnect the power from the mains when equipment is not in use or before cleaning!
Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable.
• Make sure that the available voltage is between 110v/240v.
• Make sure that the power-cable is never crimped or damaged. Check the equipment and the
power-cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power supply immediately.
Have a qualified engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation),
do not switch it on immediately. The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached room temperature.
• If your product fails to function correctly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Prolight dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be carried out by a qualified technician.
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.
CAUTION! TAKE CARE USING THIS
EQUIPMENT!HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
01
LED Cr ystal Magic Ball Light Instruction Manual
Voltage: ACV90-240V 50/ 60Hz
Lamp: 1 pcs of 3W LED Multi-color RGB
Power: 10W
Insulating fuse: >2 MΩ
Channels: 6channel
Beam angle: 150 degree
Size: 210×210×179mm
Packing Size: 280×260×240mm
N.W: 1.8kg
G.W: 2.5kg
2
02
LED Cr ystal Magic Ball Light Instruction Manual
Overview
Front
Back
9
6
5
ON
OFF
1 2 3 4 5 6 7 8 9 10
1
2
4
3
8
7
Identification
4.Power
5.Fuse
6.MIC
1. DMX In
2. DMX Out
3.Sound sensitivity control
7.Diswitches
8.LED Power light
9.Lens
FUCTION INTRODUTION:
It can be controlled by internationally DMX512 signal, also control with single light via dip
switch, and Master/salve control. It is extremely easy to use.DMX 512 control: first, connect
from consoleto the signal input of first light with XRL, and then connect from signal output of
first light to the signal input of the second light, as the same step to the last one, for example:
DMX512
INPUT
OUTPUT
Controller line
LED LED Controlled line
First Lights
LED Controlled line
Second Lights
N Lights
3.Before using of DMX512 control, please turn power on the light.
Note: Please keep in mind that the signal output of final lamp should be connected to the
circuit plug, circuit plug has a 120 ohm resistance between 2 feet and 3 feet, the circuit plus
can avoiding signal reflecting phenomenon during DMX 512 transmission.
03
LED Cr ystal Magic Ball Light Instruction Manual
Console channel instruction.
DIP switch control by DMX 512 (take the console of CH16 and CH20 for example)
04
LED Cr ystal Magic Ball Light Instruction Manual
05
LED Cr ystal Magic Ball Light Instruction Manual
06