Download User`s Manual
Transcript
DU6871/DW6851/DX6831 DLP Projector - User's Manual Starting to Use the Projector Setup Connecting to AC Power Supply The AC power cord is included in the box, plug the power cord to the AC socket (AC100V240V) on the back of the projector and plug another end of the AC power cord to the AC outlet. Note: • Make sure the power system (including the project and power supply system) is properly grounded before connecting to the AC power. The projector may be damaged without the grounding circuit. • This is a high-brightness and high-watt projector. Do not modify the AC power cord or replace the power cord arbitrarily to avoid causing damages to the projector or safety problems. Turn on Press ON on the remote control or POWER on the projector. The power and lamp LED indicator flashes green to show warm-up. POWER MENU INPUT AUTO SYNC ASPECT EXIT or The power and lamp LED indicator will light green and the projector lights turn on when the projector is ready for use. Refer to the chapter of LED statuses if the LED indicator flashes red. Please contact the Vivitek licensed dealer if the problem cannot be solved. 21