Download Test Report - Home Depot

Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
PRECIOUS MOMENTS INC
4105 CHAPEL ROAD
CARTHAGE MO 64836
UNITED STATES
PASS
Overall Result
Test Sequence
Sample Description
Category
:
:
:
:
Self-declared Style/Item No.
UPC No.
No. of Samples recd
Sample submitted by Vendor
Supplier
Buyer
Maker
Program
P.O. No.
Country of Origin
Country of Destination
Sample received date
Further information date
Testing Period
Appropriate age grading
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Signed for and on behalf of
SGS-CSTC Ltd.
________________________
Lin Shuzhen, Dora
Lab Manager
PASS
Initial Production(1)
PENGUIN LED PLAQUE
PMI- NON- FOOD CONTACT PRODUCT &
BATTERY OPERATED PRODUCT
121405C
NOT PROVIDED
4 PC
VICTRADCO, LTD
VICTRADCO, LTD
PRECIOUS MOMENTS INC
SUNSHINETOWN
TESTING
003755
CHINA
USA/CANADA
APR 11, 2012
APR 25, 2012
APR 11, 2012 TO APR 25, 2012
NON - TOY
Page 1 of 19
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 2 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
SCOPE
Test Principle / Requirements
Results
--
Applies to decorations, such as porcelain figurines,
musical box, water ball…
/
--
Shall also test to Battery Operated Product
Supplement.
Refer to battery
operated
product
protocol
Every article of foreign origin (or its container)
imported into the U.S. must be marked
legibly, indelibly, permanently and in as conspicuous a
place as the nature of the article
(or container) will permit. The marking will indicate to
the ultimate purchaser in the U.S.
the English name of the country of origin of the article
at the time of importation into the
U.S.
Use and care instructions should be clear and
understandable and provided in English
for items sold in the United States.
The UPC code label must be on the giftbox and will
either be on the item or added to the giftbox as
determined by Precious Moments Inc.
The name of your manufacturer or the importer must
be permanently fired into, or painted on the bottom of
each individual piece.
Items that meet FDA levels but fail Proposition 65
levels must be properly labeled with a yellow triangle
and following warning statement:
" WARNING: Using this product will expose you to
lead and/or cadmium, chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm. Lead and cadmium are contained
in the glaze coating on this product and can pass into
foods or drinks placed in it."
Pass
SUPPLEMENTAL PROTOCOL
Battery Operated
Supplement
For US
LABELING
Country of Origin Marking
19 CFR 134
Instruction Language
Various State Laws
UPC code
Precious Moments
Inc. requirement.
Visual check
CALIFORNIA
PROPOSITION 65
Permanent marking
California Extractable Lead
And Cadmium Labeling
CALIFORNIA
PROPOSITION 65
************
Pass
Pass
Pass
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 3 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Labeling For Polybag (If
Applicable)
Test Method
Test Principle / Requirements
Precious Moments
Inc. requirement.
Visual check
If opening of the polybag is greater than or equal to 14
inches(355mm) in circumference, the following
marking should be marked on the polybag
Results
/
Not Provided
WARNING : TO AVOID DANGER
OF SUFFOCATION. KEEP THIS
BAG AWAY FROM BABIES &
CHILDREN. DO NOT USE IN
CRIBS, BEDS, CARRIAGES, OR
PLAYPENS. THIS BAG IS NOT A
TOY. KNOT BAG BEFORE
THROWING AWAY.
Labeling For Musical
Box
(If Applicable)
Precious Moments
Inc. requirement.
Visual check
For non child/juvenile products, the following label
should be printed on the packaging AND on the
product or a tag attached to the product:
/
Not Applicable
This is not a toy. Keep away from
babies and children
Packaging And Labeling
(If Applicable)
Precious Moments
Inc. requirement.
Visual check
Should contains: information enable the customer to
obtain accurate information regarding the product &
labeled legibly and permanently with the country of
origin. MADE IN (COUNTRY OF ORIGIN), name (and
address if present) of PRECIOUS MOMENTS INC or
Licensee.
************
/
Not Provided
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 4 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
Test Principle / Requirements
Bark Covered Logs, Twigs,
Limbs, and
Branches (if imported from
China)
Cautionary labeling - Liquid
filled
products
USDA
Shall have an overall diameter of 1 centimeter or less,
or samples are cut from logs,
twigs, limbs, or branches that have an overall diameter
of 1 centimeter or less.
Liquid filled products include warning labeling
referencing the hazard that the liquid may
present if swallowed or inhaled. Labeling contains a
signal word "warning" or "danger"
and a statement such as "harmful if swallowed",
"harmful or fatal if swallowed", "Vapor
harmful" or similar. Along with the warning statement,
a "Keep out of reach of children"
or equivalent statement is provided OR Documentation
is provided by the supplier
indicating the liquid does not contain hazardous
substances exceeding the
concentration amounts listed in 16CFR 1500.14
Product shall meet all label claims, both factual and
objective. Supplier shall provide
documentation to support all claims. If documentation
is not provided, testing shall be
performed to substantiate label claims. Comments:
Labs to record all verified claims
Mandates permanent, distinguish marks on product
and its packaging that will enable manufacturer and
ultimate purchaser to ascertain
Name of manufacturer or private labeler
Claim Verification
Tracking Label
(For children’s products
only)
16 CFR 1500.14
(modified)
Federal Trade
Commission /
Various
State Laws
Consumer Product
Safety
Improvement Act
2008 - Public Law
110-314 (HR4040)
Section 103
Source (location)
Date of production
Cohort information including batch, run number
or other ID
Effective on 14 Aug, 2009.
Remark: The requirement shall follow the latest update
from CPSIA. It is the manufacturer’s responsibility for
the conformity of this requirement.
************
Results
/
Not Applicable
/
Not Applicable
/
No claim
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 5 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
Test Principle / Requirements
Precious Moments
Inc. requirement.
Precious Moments
Inc. requirement.
Visual check
Precious Moments
Inc. requirement.
Visual check
Shall be between 8 – 12%. Report the actual moisture
content.
The product must conform to actual claim.
Results
For US
PERFORMANCE
Moisture content % (wood
only)
Claim Verification (if claim)
Workmanship review
FAIL for any missing information and instruction.
All components shall be provided as claimed.
/
No wood
/
No claim
Pass
The components shall not be deformed or fractured.
The welds shall be smoothly finished and free from
pits and splatter.
The components shall not contain burrs or sharp
edges or sharp points.
Product shall not contain any loose components or
unsecured fastening.
For US
REGULATORY (Mandatory) REQUIREMENTS
CA Prop 65
CPSC Physical and
Mechanical hazards
---
16 CFR 1500/
16 CFR 1501
The sample should be reviewed against the
requirements of California Proposition 65 to determine
if additional testing or labeling is required.
/
Not Applicable
Shall meet the requirements specified in the
standard.
/
Not Applicable
Shall not exceed the maximum allowable limit of no
greater than 0.1 inches per second
Self-pressurized container shall meet the flammability
requirements of 16 CFR 1500.3(c)(6)(viii).
Method of test for flashpoint of potentially volatile
combustible materials (150 ˚F / 65.6 ˚C). All liquid
filled items intended or likely to be used by children
shall comply with this requirement.
Pass
(For children product)
16 CFR 1500.44
Flammability (solids)
16 CFR 1500.3(c)(6)(viii)
Flammability (container)
16 CFR 1500.3(c)(6)(iii)
Combustible liquids
16 CFR 1500.44
16 CFR
1500.3(c)(6)(viii)
16 CFR
1500..3(c)(6)(iii) /
16 CFR 1500.43(a)
************
/
Not Applicable
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 6 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
Lead content in paint /
similar coating material
Applicable to
1. Paint and similar
coating material
2. Children’s product
3. Furniture
CPSIA 2008 public Law
110-314 section 101
Lead in Substrate
CPSC-CH-E100309.1
ASTM F963 Heavy metals
content
(For children product)
Test Principle / Requirements
US Public Law 110-314
(CPSIA section 101 (f))
≤ 90 ppm
CPSC-CH-E100108.1
CPSC-CH-E100208.1
With reference to
ASTM F963-11
All accessible substrate intended for children shall not
contain lead or lead compounds in which the lead
content is in excess of 0.01% (100ppm) of the weight
of the total content,
ASTM F963-11
1) Lead content
≤ 90 mg/kg (for surface coating)
≤ 100 mg/k (for substrate)
2) Soluble heavy metals (for surface coating and
substrate)
≤ 60 ppm (antimony)
≤ 25 ppm (arsenic)
≤ 1000 ppm (barium)
≤ 75 ppm (cadmium)
≤ 60 ppm (chromium)
≤ 60 ppm (mercury)
≤ 500 ppm (selenium)
Remark:
1) For metal, glass and ceramic, only applicable for
small part.
2) Total content screening test (maximum 3-in-1)
can be performed for similar materials (e.g.
plastic composite with plastic)
3) Extractable Cadmium (for metal small part)
≤ 200 µg
************
Results
Pass
See Result
Page
/
Not Applicable
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 7 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
16 CFR 1500.231
Hazardous liquid (GC scan)
16 CFR 1500.231
USP <61& 62> Microbial
Limits Test
(If applicable)
USP 61, USP 62
ASTM F963
USP <51> Preservative
effectiveness
ASTM F963/ USP
<51>
Test Principle / Requirements
To identify the presence of potentially hazardous
ingredients found during the hazardous liquid screen.
All liquid filled items intended or likely to be used by
children shall comply with this requirement.
USP 61
Total Plate Count: <1000CFU
Yeast and Mold Count: <1000CFU
MPN = Most probable number;
ML = Milliliter, CFU = colony forming units
USP 62
Bile tolerant Gram negative bacteria:
not detected
Salmonella: not detected;
Escherichia coli: not detected;
Pseudomonas aeruginosa: not detected;
Staphylococcus aureus: not detected
Clostridia species: not detected
Candida albicans: not detected
Formulations used to prevent microbial degradation in
Cosmetics, Liquids, Pastes, Putties, Gels and
Powders used in toys (excluding art materials) shall be
tested for microbial control and preservative
effectiveness.
************
Results
/
Not Applicable
/
Not Applicable
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 8 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
Test Principle / Requirements
Results
For Canada
LABELING REQUIREMENTS
Packaging-Mandatory label
information
Consumer
Packaging and
Labeling Act
(Canada)
Manufacturer or distributor Information:
Manufacturer or distributor’s name & Address
(sufficient for postal delivery-city,street address and
postal code). Minimum 1.6 mm in low case letter size.
*place anywhere except bottom.
/
N/C
Product Net Quantity:
Declaration must be in English & French, metric units,
on principal display panel, bold, type size based on
principal display panel size
Product Identification:
Product identification shall be in both English and
French, on principal display panel wit 1.6 mm
minimum type size
Labeling For Polybag (If
Applicable)
Precious Moments
Inc. requirement.
Visual check
If opening of the polybag is greater than or equal to 14
inches(355mm) in circumference, the following
marking should be marked on the polybag
/
Not Provided
WARNING : TO AVOID DANGER OF
SUFFOCATION. KEEP THIS BAG AWAY
FROM BABIES & CHILDREN. DO NOT USE IN
CRIBS, BEDS, CARRIAGES, OR PLAYPENS.
THIS BAG IS NOT A TOY. KNOT BAG
BEFORE THROWING AWAY.
Labeling For Musical
Box
(If Applicable)
Precious Moments
Inc. requirement.
Visual check
For non child/juvenile products, the following label
should be printed on the packaging AND on the
product or a tag attached to the product:
/
Not Applicable
This is not a toy. Keep away from
babies and children
Packaging And Labeling
(If Applicable)
Precious Moments
Inc. requirement.
Visual check
Should contains: information enable the customer to
obtain accurate information regarding the product &
labeled legibly and permanently with the country of
origin. MADE IN (COUNTRY OF ORIGIN), name (and
address if present) of PRECIOUS MOMENTS INC or
Licensee.
/
Not Provided
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 9 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
Test Principle / Requirements
Cautionary labeling - Liquid
filled
products
Precious Moments
Inc. requirement.
Claim Verification
Precious Moments
Inc. requirement.
Liquid filled products include warning labeling
referencing the hazard that the liquid may
present if swallowed or inhaled. Labeling contains a
signal word "warning" or "danger"
and a statement such as "harmful if swallowed",
"harmful or fatal if swallowed", "Vapor
harmful" or similar. Along with the warning statement,
a "Keep out of reach of children"
or equivalent statement is provided OR Documentation
is provided by the supplier
indicating the liquid does not contain hazardous
substances exceeding the
concentration amounts listed in 16CFR 1500.14
Product shall meet all label claims, both factual and
objective. Supplier shall provide documentation to
support all claims. If documentation is not provided,
testing shall be performed to substantiate label claims.
Comments: Labs to record all verified claims
Results
/
Not Applicable
/
No Claim
For Canada
PERFORMANCE
Moisture content % (wood
only)
Precious Moments
Inc. requirement.
Shall be between 8 – 12%. Report the actual moisture
content.
/
No wood
Claim Verification (if claim)
Precious Moments
Inc. requirement.
Visual check
The product must conform to actual claim.
/
Not Claim
Precious Moments
Inc. requirement.
Visual check
All components shall be provided as claimed.
Workmanship review
FAIL for any missing information and instruction.
The components shall not be deformed or fractured.
The welds shall be smoothly finished and free from
pits and splatter.
The components shall not contain burrs or sharp
edges or sharp points.
Product shall not contain any loose components or
unsecured fastening.
************
Pass
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 10 of 19
PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT
Test Property
Test Method
Test Principle / Requirements
Results
For Canada
REGULATORY (Mandatory) REQUIREMENTS
Jequirity Beans ( Prohibited
Product)
CCPSA schedule
2, item1
Flame Resistance –Textile
Fibres ( Prohibited Product)
SOR/2011-22
Cellulose nitrate
( Prohibited Product)
Lead and Mercury content
in Surface coating
Toys Regulations
(SOR/2011-17)
Section 21 of
CCPSA
C-02.2 of Health
Canada
USP <61& 62> Microbial
Limits Test
(If applicable)
Refer to:
USP 61,
USP 62
USP <51> Preservative
effectiveness
Refer to:
USP <51>
Jequirity beans (abrus precatorius) or any substance
or article made from or including jequirity beans in
whole or in part.
Products made in whole or in part of textile fibers when
tested in accordance with CAN/CGSB 4.2 NO. 27.594, Textile Test Methods – Flame Resistance – 45°
Angle Test – One Second Flame Impingement, shall
have a time of flame spread of:
(a) 3.5 seconds or less, if the product does not have a
raised fibre surface; OR
(b) 4 seconds or less, if the product has a raised fibre
surface and exhibits ignition or fusion of its base fibres.
Shall not exhibit burn characteristics associated with
materials in whole or in part, made of or impregnated
with celluloid or cellulose nitrate.
Canadian Hazardous Products Act on Surface Coating
Materials SOR/2005-109 and its amendment
SOR/2010-224:
Lead content: ≤90mg/kg
Mercury content: ≤10mg/kg
Shall not contain restricted products listed in item 8 of
the schedule if it can, under reasonably foreseeable
circumstances, became accessible to child or where
the substance is a filling that may be released on
breakage or leakage.
Formulations used to prevent microbial degradation in
Cosmetics, Liquids, Pastes, Putties, Gels and
Powders used in toys (excluding art materials) shall be
tested for microbial control and preservative
effectiveness.
************
/
Not Applicable
/
Not Applicable
/
Not Applicable
Pass
See Result
Page
/
Not Applicable
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 11 of 19
PMI Test Report – Test Detail –PMI- Battery Operated Product
Test Property
Test Method
SCOPE
Test Principle / Requirements
Results
Applies to products that utilize batteries in order to
operate.
/
The correct battery polarity using the polarity symbols
“+” and “−” shall be marked permanently on the battery
compartment or on the area immediately adjacent to
the battery compartment on the product.
Pass
For US
LABELING REQUIREMENTS
Battery Labeling –
Packaging / Product
Visual check
Other information like
- No. of batteries required
- Batteries included or not
- Size of battery
Could be located on the packaging or product.
Non-replaceable batteries
ASTM F963
Battery Warning Statement
ASTM F963
These markings are not required for non-replaceable
batteries or for rechargeable battery packs that, by
design, can only be inserted in the correct orientation.
Battery compartments for button cell batteries are not
subject to this requirement.
Non-replaceable batteries that are accessible with the
use of other common household tool shall bear a
statement that the battery is not replaceable.
The following statement either in the instructions or
marked on the device (required only for devices which
use more than one battery in one circuit)
-Do not mix old and new batteries
-Do not mix alkaline, standard (carbon-zinc) or
rechargeable (ni-cad, ni-mh, etc.) batteries
/
Not Applicable
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 12 of 19
PMI Test Report – Test Detail –PMI- Battery Operated Product
Test Property
Test Method
Test Principle / Requirements
For US
REGULATORY (Mandatory) REQUIREMENTS
Battery operated product
ASTM F963
Shall meet the safety requirement as specified in
4.25.1 to 4.25.9
ASTM F963, section 4.25
- subsection 1 to 9.
FCC Part 15 - Electric Toy
FCC Parts 15 – 27 (26.96 –
27.28) MHz Radio
Controlled Toy
FCC Parts 15 – 49 (49.82 –
49.90) MHz Radio
Controlled Toys
UL Testing
(For electrically operated
product)
*Mercury Content
Applicable to Batteries
FCC Part 15 Electric Toy
FCC Parts 15 – 27
(26.96 – 27.28)
MHz Radio
Controlled Toys
FCC Parts 15 – 49
(49.82 – 49.90)
MHz Radio
Controlled Toys
UL Standard
Acid digestion /
AAS
Shall meet the requirements specified in the standard.
In lieu of testing, test report can be submitted if
dated within two years.
For the frequency of RC products meet the scope of
these requirements. Shall meet the requirements
specified in the standard.
Results
/
Not Applicable
/
Not Applicable
/
Not Applicable
In lieu of testing, test report can be submitted if
dated within two years.
Item will be audited to verify compliance with the
selected sections of the applicable and/or labeled UL
standard.
It is the vendor’s responsibility for the conformity
of this requirement. Relevant reports / documents
must be submitted for review.
US Mercury-Containing Battery Management Act
Public Law No 104-142 (1996)/ Various US State
Laws (Connecticut, Maine, and Rhode Island)
Prohibited
(SGS detection limit = 1 mg/kg)
************
/
Not Applicable
Pass
See Result
Page
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 13 of 19
PMI Test Report – Test Detail –PMI- Battery Operated Product
Test Property
Test Method
Test Principle / Requirements
Results
For Canada
LABELING REQUIREMENTS
Packaging Labeling
Consumer Pkg. &
Labeling Act &
Regulations
Quebec, R.S.Q., c.
C-11
ICES-003 labeling
ICES-003
Manufacturer or distributor’s name & address (city &
zip). Minimum 1.6 mm type size Placed anywhere
except bottom – English or French.
Product Net Quantity English And French (Metric)
PDP, Bold, Type Size Based On PDP Size
Principal Display Panel Minimum Type
<32 cm2 (5 In2)
--1.6 mm (1/16 In)
>32 cm2 but <258 cm2 (40 In2)
-- 3.2 mm (1/8 In)
>258 cm2 but < 645 cm2 (100 In2)
--6.4 mm (1/4 In)
>645 cm2 but <25.8 dm2 (400 In2)
-- 9.5 mm (3/8 In)
>25.8 dm2 (400 In2)
-- 12.7 mm (1/2 In)
Product identification English and French, PDP in bold
with 1.6mm minimum type size
Every inspection on a product container, wrapping,
leaflet, brochure or card supplied with the product,
including the directions for use and warranty
certificates, must be drafted in French. No inscription
in another language may be given greater prominence
than that in French.
Product subjected to the requirements of ICES-003
shall be legibly and permanently marked in both
English and French with the substances of :
“This Class B digital apparatus complies with
Canadian ICES-003.” And
“Cet appareil numérique de la classe Best
conforme à la norme NMB-003 du Canada.”
Note : Similar sentence may be accepted. If placing of
the markings is impractical on the product due to size
or shape, these markings shall be marked on
instruction manual supplied with the product.
************
/
N/C
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 14 of 19
PMI Test Report – Test Detail –PMI- Battery Operated Product
Test Property
Radio Control Product
Test Method
RSS-GEN/
RSS-310
RSS-210
Test Principle / Requirements
(A) Category II equipment shall be labeled with the
manufacturer’s name or brand name, and model
identification number and these words “Canada
310” .(RSS-GEN & RSS-310)
(B) In addition to the user manual requirements in
RSS-Gen (Section 7.1.5), the carrier frequency and
the RF output power (or field strength and
measurement distance) shall also be stated in the user
manual. (for category II, in both English and French) :
“This Category II radio communication device
complies with Industry Canada Standard RSS-310.
Ce dispositif de radiocommunication de catégorie
II respecte la norme CNR-310 d’Industrie Canada. »
For this toy bell, needn’t bear this information.
All Category I radio equipment intended for use in
Canada shall permanently display on each transmitter,
receiver, or inseparable combination thereof, the
applicant’s name (i.e. manufacturer’s name, trade
name or brand name), model number and certification
number.
* Certified radio equipment must be labelled with a
unique certification/registration number:
“IC:CN+UPN “ (RSS-GEN & RSS-210 ).
************
Results
/
Not Applicable
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 15 of 19
PMI Test Report – Test Detail –PMI- Battery Operated Product
Test Property
Test Method
Test Principle / Requirements
Results
For Canada
REGULATORY (Mandatory) REQUIREMENTS
ICES
ICES-003
The item shall meet the relevant requirements of
ICES-003 if :
/
Not Applicable
- Battery operated with power consumption exceeding
6nW, or both highest frequency generated and the
highest frequency used are equal or exceeding
1.705MHz ; or
-
a.c. operated, with power exceeding 6nW and
clock frequency > 10kHz.
In lieu of testing, test report can be submitted
if dated within two years.
Shall meet the requirements specified in the standard.
-
Radio Frequency Product
RSS310/RSS210
In lieu of testing, test report can be submitted if
dated within two years.
Battery leakage test
Toys Regulations
(SOR/2011-17)
Section 43 of
CCPSA
Shall not reveal associated hazards upon subjection to
vibration and drop testing.
Note: N/C means not conducted as per client’s request.
************
/
Not Applicable
Pass
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 16 of 19
Result Page:
US Battery Requirement for Mercury Content
Method: With reference to EPA 3052: 1996
Analysis was performed by Direct Mercury Analyzer (DMA)
Specimen Description
1. Battery (1.5V AA AM3 LR6)
Note:
-
mg/unit = milligram per unit
-
ND = Not Detected (lower than MDL)
-
MDL = Method Detection Limit = 10 mg/unit
Alias
No.
Tracing
No.
Result(s)
(mg/unit)
1
1
ND
The Prohibitions of Mercury contained batteries in United States are summarized as below Table
Region
Scope of Prohibition
Effective Date
United States
alkaline-manganese battery with a mercury content that was
intentionally introduced
alkaline-manganese button cells with a mercury content over 25
milligram of mercury per button cell
zinc-carbon battery that contains mercury that was intentionally
introduced
button cell mercuric-oxide battery
Button cell batteries containing mercury
Button cell batteries used in Medical device for delivering insulin
Silver oxide button cell batteries
Mercury-added button cell batteries:
1. Zinc- air button cell battery
2. Alkaline manganese button cell battery
3. Silver oxide button cell stamped with the designation SR357,
SR 364, SR371, SR377, SR395, SR44W, SR621SW,
SR626SW, SR920SW or SR927SW
Mercury-added silver oxide button cell batteries
Mercury-added button cell batteries
Silver oxide button cell batteries
13 May, 1996
Connecticut State
Maine State
Rhode Island State
13 May, 1996
13 May, 1996
13 May, 1996
1 July, 2011
1 January, 2015
1 July, 2012
1 January, 2012
2 January, 2015
1 July, 2011
1 January, 2012
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 17 of 19
Lead in Paint / Similar Surface Coating Material
Method: With reference to CPSC-CH-E1003-09.1 - Standard Operating Procedure for Determining Lead (Pb) in
Paint and Other Similar Surface Coatings
Alias
No.
Tracing
No.
Result(s)
(ppm)
Comment
1. Iridescent glitter
4
1
ND
Pass
2. Grey coating (Head, arm, body)
4
2
ND
Pass
3. Lt. blue coating (Scarf, light, cap)
4
3
ND
Pass
4. Blue coating (Scarf, light, cap)
4
4
ND
Pass
5. Yellow coating (Mouth, star, foot)
4
5
ND
Pass
6. White (Cap, eye) w/ black (Eye, brow), brown (Eye,
eyelash), cream (Blush) coating
4
6
ND
Pass
7. Purple w/ red coating (Light)
4
7
ND
Pass
8. Pink (Mouth) w/ Dk. green (Light), golden (Lamp-socket)
coating
4
8
ND
Pass
9. Silver coating (Wire jacket) w/ black coating on paper
label
4
9
ND
Pass
Specimen Description
Note:
-
ppm = parts per million
-
1% = 10000 mg/kg = 10000 ppm
-
ND = Not Detected (lower than MDL)
-
MDL = Method Detection Limit = 10 ppm
The requirement(s) for lead in paint/similar surface coating material is(are) summarized as below:
Requirement
Lead in Paint / Similar coating per CPSC 16 CFR 1303
Permissible
Limit (ppm)
Effective date
90
Current Limit
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Page 18 of 19
Canada Surface Coating Materials Regulations (SOR/2005-109) - Lead and Mercury Content
Method: With reference to Canada Health Product Safety Bureau, Reference Manual Book 5 – Laboratory
Policies and Procedures, Part B: Test Methods Section, Method C-02.2, C-07
Total
Test Item(s)
Permissible Limit (mg/kg)
Pb
Hg
90
10
Alias
No.
Tracing
No.
1. Iridescent glitter
2
1
ND
ND
2. Grey coating (Head, arm, body)
2
2
ND
ND
3. Lt. blue coating (Scarf, light, cap)
2
3
ND
ND
4. Blue coating (Scarf, light, cap)
2
4
ND
ND
5. Yellow coating (Mouth, star, foot)
2
5
ND
ND
6. White (Cap, eye) w/ black (Eye, brow), brown (Eye,
eyelash), cream (Blush) coating
2
6
ND
ND
7. Purple w/ red coating (Light)
2
7
ND
ND
8. Pink (Mouth) w/ Dk. green (Light), golden (Lamp-socket)
coating
2
8
ND
ND
9. Silver coating (Wire jacket) w/ black coating on paper label
2
9
ND
ND
10. White paper label
3
1
ND
ND
Specimen Description
Note:
-
mg/kg = milligram per kilogram
-
ND = Not Detected (lower than MDL)
-
MDL = Method Detection Limit
-
MDL for Pb = 10 mg/kg
-
MDL for Hg = 1 mg/kg
-
1% = 10000 mg/kg =10000 ppm
Result(s) (mg/kg)
Test Report
No. SZTY1204001880SD
Date: APR 25, 2012
Sample Photo:
SGS authenticate the photo on original report only
*** End of Report ***
Page 19 of 19