Download Test Report - Home Depot
Transcript
Test Report No. SZTY1204001880SD Date: APR 25, 2012 PRECIOUS MOMENTS INC 4105 CHAPEL ROAD CARTHAGE MO 64836 UNITED STATES PASS Overall Result Test Sequence Sample Description Category : : : : Self-declared Style/Item No. UPC No. No. of Samples recd Sample submitted by Vendor Supplier Buyer Maker Program P.O. No. Country of Origin Country of Destination Sample received date Further information date Testing Period Appropriate age grading : : : : : : : : : : : : : : : Signed for and on behalf of SGS-CSTC Ltd. ________________________ Lin Shuzhen, Dora Lab Manager PASS Initial Production(1) PENGUIN LED PLAQUE PMI- NON- FOOD CONTACT PRODUCT & BATTERY OPERATED PRODUCT 121405C NOT PROVIDED 4 PC VICTRADCO, LTD VICTRADCO, LTD PRECIOUS MOMENTS INC SUNSHINETOWN TESTING 003755 CHINA USA/CANADA APR 11, 2012 APR 25, 2012 APR 11, 2012 TO APR 25, 2012 NON - TOY Page 1 of 19 Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 2 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method SCOPE Test Principle / Requirements Results -- Applies to decorations, such as porcelain figurines, musical box, water ball… / -- Shall also test to Battery Operated Product Supplement. Refer to battery operated product protocol Every article of foreign origin (or its container) imported into the U.S. must be marked legibly, indelibly, permanently and in as conspicuous a place as the nature of the article (or container) will permit. The marking will indicate to the ultimate purchaser in the U.S. the English name of the country of origin of the article at the time of importation into the U.S. Use and care instructions should be clear and understandable and provided in English for items sold in the United States. The UPC code label must be on the giftbox and will either be on the item or added to the giftbox as determined by Precious Moments Inc. The name of your manufacturer or the importer must be permanently fired into, or painted on the bottom of each individual piece. Items that meet FDA levels but fail Proposition 65 levels must be properly labeled with a yellow triangle and following warning statement: " WARNING: Using this product will expose you to lead and/or cadmium, chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Lead and cadmium are contained in the glaze coating on this product and can pass into foods or drinks placed in it." Pass SUPPLEMENTAL PROTOCOL Battery Operated Supplement For US LABELING Country of Origin Marking 19 CFR 134 Instruction Language Various State Laws UPC code Precious Moments Inc. requirement. Visual check CALIFORNIA PROPOSITION 65 Permanent marking California Extractable Lead And Cadmium Labeling CALIFORNIA PROPOSITION 65 ************ Pass Pass Pass / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 3 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Labeling For Polybag (If Applicable) Test Method Test Principle / Requirements Precious Moments Inc. requirement. Visual check If opening of the polybag is greater than or equal to 14 inches(355mm) in circumference, the following marking should be marked on the polybag Results / Not Provided WARNING : TO AVOID DANGER OF SUFFOCATION. KEEP THIS BAG AWAY FROM BABIES & CHILDREN. DO NOT USE IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY. KNOT BAG BEFORE THROWING AWAY. Labeling For Musical Box (If Applicable) Precious Moments Inc. requirement. Visual check For non child/juvenile products, the following label should be printed on the packaging AND on the product or a tag attached to the product: / Not Applicable This is not a toy. Keep away from babies and children Packaging And Labeling (If Applicable) Precious Moments Inc. requirement. Visual check Should contains: information enable the customer to obtain accurate information regarding the product & labeled legibly and permanently with the country of origin. MADE IN (COUNTRY OF ORIGIN), name (and address if present) of PRECIOUS MOMENTS INC or Licensee. ************ / Not Provided Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 4 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method Test Principle / Requirements Bark Covered Logs, Twigs, Limbs, and Branches (if imported from China) Cautionary labeling - Liquid filled products USDA Shall have an overall diameter of 1 centimeter or less, or samples are cut from logs, twigs, limbs, or branches that have an overall diameter of 1 centimeter or less. Liquid filled products include warning labeling referencing the hazard that the liquid may present if swallowed or inhaled. Labeling contains a signal word "warning" or "danger" and a statement such as "harmful if swallowed", "harmful or fatal if swallowed", "Vapor harmful" or similar. Along with the warning statement, a "Keep out of reach of children" or equivalent statement is provided OR Documentation is provided by the supplier indicating the liquid does not contain hazardous substances exceeding the concentration amounts listed in 16CFR 1500.14 Product shall meet all label claims, both factual and objective. Supplier shall provide documentation to support all claims. If documentation is not provided, testing shall be performed to substantiate label claims. Comments: Labs to record all verified claims Mandates permanent, distinguish marks on product and its packaging that will enable manufacturer and ultimate purchaser to ascertain Name of manufacturer or private labeler Claim Verification Tracking Label (For children’s products only) 16 CFR 1500.14 (modified) Federal Trade Commission / Various State Laws Consumer Product Safety Improvement Act 2008 - Public Law 110-314 (HR4040) Section 103 Source (location) Date of production Cohort information including batch, run number or other ID Effective on 14 Aug, 2009. Remark: The requirement shall follow the latest update from CPSIA. It is the manufacturer’s responsibility for the conformity of this requirement. ************ Results / Not Applicable / Not Applicable / No claim / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 5 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method Test Principle / Requirements Precious Moments Inc. requirement. Precious Moments Inc. requirement. Visual check Precious Moments Inc. requirement. Visual check Shall be between 8 – 12%. Report the actual moisture content. The product must conform to actual claim. Results For US PERFORMANCE Moisture content % (wood only) Claim Verification (if claim) Workmanship review FAIL for any missing information and instruction. All components shall be provided as claimed. / No wood / No claim Pass The components shall not be deformed or fractured. The welds shall be smoothly finished and free from pits and splatter. The components shall not contain burrs or sharp edges or sharp points. Product shall not contain any loose components or unsecured fastening. For US REGULATORY (Mandatory) REQUIREMENTS CA Prop 65 CPSC Physical and Mechanical hazards --- 16 CFR 1500/ 16 CFR 1501 The sample should be reviewed against the requirements of California Proposition 65 to determine if additional testing or labeling is required. / Not Applicable Shall meet the requirements specified in the standard. / Not Applicable Shall not exceed the maximum allowable limit of no greater than 0.1 inches per second Self-pressurized container shall meet the flammability requirements of 16 CFR 1500.3(c)(6)(viii). Method of test for flashpoint of potentially volatile combustible materials (150 ˚F / 65.6 ˚C). All liquid filled items intended or likely to be used by children shall comply with this requirement. Pass (For children product) 16 CFR 1500.44 Flammability (solids) 16 CFR 1500.3(c)(6)(viii) Flammability (container) 16 CFR 1500.3(c)(6)(iii) Combustible liquids 16 CFR 1500.44 16 CFR 1500.3(c)(6)(viii) 16 CFR 1500..3(c)(6)(iii) / 16 CFR 1500.43(a) ************ / Not Applicable / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 6 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method Lead content in paint / similar coating material Applicable to 1. Paint and similar coating material 2. Children’s product 3. Furniture CPSIA 2008 public Law 110-314 section 101 Lead in Substrate CPSC-CH-E100309.1 ASTM F963 Heavy metals content (For children product) Test Principle / Requirements US Public Law 110-314 (CPSIA section 101 (f)) ≤ 90 ppm CPSC-CH-E100108.1 CPSC-CH-E100208.1 With reference to ASTM F963-11 All accessible substrate intended for children shall not contain lead or lead compounds in which the lead content is in excess of 0.01% (100ppm) of the weight of the total content, ASTM F963-11 1) Lead content ≤ 90 mg/kg (for surface coating) ≤ 100 mg/k (for substrate) 2) Soluble heavy metals (for surface coating and substrate) ≤ 60 ppm (antimony) ≤ 25 ppm (arsenic) ≤ 1000 ppm (barium) ≤ 75 ppm (cadmium) ≤ 60 ppm (chromium) ≤ 60 ppm (mercury) ≤ 500 ppm (selenium) Remark: 1) For metal, glass and ceramic, only applicable for small part. 2) Total content screening test (maximum 3-in-1) can be performed for similar materials (e.g. plastic composite with plastic) 3) Extractable Cadmium (for metal small part) ≤ 200 µg ************ Results Pass See Result Page / Not Applicable / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 7 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method 16 CFR 1500.231 Hazardous liquid (GC scan) 16 CFR 1500.231 USP <61& 62> Microbial Limits Test (If applicable) USP 61, USP 62 ASTM F963 USP <51> Preservative effectiveness ASTM F963/ USP <51> Test Principle / Requirements To identify the presence of potentially hazardous ingredients found during the hazardous liquid screen. All liquid filled items intended or likely to be used by children shall comply with this requirement. USP 61 Total Plate Count: <1000CFU Yeast and Mold Count: <1000CFU MPN = Most probable number; ML = Milliliter, CFU = colony forming units USP 62 Bile tolerant Gram negative bacteria: not detected Salmonella: not detected; Escherichia coli: not detected; Pseudomonas aeruginosa: not detected; Staphylococcus aureus: not detected Clostridia species: not detected Candida albicans: not detected Formulations used to prevent microbial degradation in Cosmetics, Liquids, Pastes, Putties, Gels and Powders used in toys (excluding art materials) shall be tested for microbial control and preservative effectiveness. ************ Results / Not Applicable / Not Applicable / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 8 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method Test Principle / Requirements Results For Canada LABELING REQUIREMENTS Packaging-Mandatory label information Consumer Packaging and Labeling Act (Canada) Manufacturer or distributor Information: Manufacturer or distributor’s name & Address (sufficient for postal delivery-city,street address and postal code). Minimum 1.6 mm in low case letter size. *place anywhere except bottom. / N/C Product Net Quantity: Declaration must be in English & French, metric units, on principal display panel, bold, type size based on principal display panel size Product Identification: Product identification shall be in both English and French, on principal display panel wit 1.6 mm minimum type size Labeling For Polybag (If Applicable) Precious Moments Inc. requirement. Visual check If opening of the polybag is greater than or equal to 14 inches(355mm) in circumference, the following marking should be marked on the polybag / Not Provided WARNING : TO AVOID DANGER OF SUFFOCATION. KEEP THIS BAG AWAY FROM BABIES & CHILDREN. DO NOT USE IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY. KNOT BAG BEFORE THROWING AWAY. Labeling For Musical Box (If Applicable) Precious Moments Inc. requirement. Visual check For non child/juvenile products, the following label should be printed on the packaging AND on the product or a tag attached to the product: / Not Applicable This is not a toy. Keep away from babies and children Packaging And Labeling (If Applicable) Precious Moments Inc. requirement. Visual check Should contains: information enable the customer to obtain accurate information regarding the product & labeled legibly and permanently with the country of origin. MADE IN (COUNTRY OF ORIGIN), name (and address if present) of PRECIOUS MOMENTS INC or Licensee. / Not Provided Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 9 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method Test Principle / Requirements Cautionary labeling - Liquid filled products Precious Moments Inc. requirement. Claim Verification Precious Moments Inc. requirement. Liquid filled products include warning labeling referencing the hazard that the liquid may present if swallowed or inhaled. Labeling contains a signal word "warning" or "danger" and a statement such as "harmful if swallowed", "harmful or fatal if swallowed", "Vapor harmful" or similar. Along with the warning statement, a "Keep out of reach of children" or equivalent statement is provided OR Documentation is provided by the supplier indicating the liquid does not contain hazardous substances exceeding the concentration amounts listed in 16CFR 1500.14 Product shall meet all label claims, both factual and objective. Supplier shall provide documentation to support all claims. If documentation is not provided, testing shall be performed to substantiate label claims. Comments: Labs to record all verified claims Results / Not Applicable / No Claim For Canada PERFORMANCE Moisture content % (wood only) Precious Moments Inc. requirement. Shall be between 8 – 12%. Report the actual moisture content. / No wood Claim Verification (if claim) Precious Moments Inc. requirement. Visual check The product must conform to actual claim. / Not Claim Precious Moments Inc. requirement. Visual check All components shall be provided as claimed. Workmanship review FAIL for any missing information and instruction. The components shall not be deformed or fractured. The welds shall be smoothly finished and free from pits and splatter. The components shall not contain burrs or sharp edges or sharp points. Product shall not contain any loose components or unsecured fastening. ************ Pass Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 10 of 19 PMI Test Report – Test Detail –PMI- NON- FOOD CONTACT PRODUCT Test Property Test Method Test Principle / Requirements Results For Canada REGULATORY (Mandatory) REQUIREMENTS Jequirity Beans ( Prohibited Product) CCPSA schedule 2, item1 Flame Resistance –Textile Fibres ( Prohibited Product) SOR/2011-22 Cellulose nitrate ( Prohibited Product) Lead and Mercury content in Surface coating Toys Regulations (SOR/2011-17) Section 21 of CCPSA C-02.2 of Health Canada USP <61& 62> Microbial Limits Test (If applicable) Refer to: USP 61, USP 62 USP <51> Preservative effectiveness Refer to: USP <51> Jequirity beans (abrus precatorius) or any substance or article made from or including jequirity beans in whole or in part. Products made in whole or in part of textile fibers when tested in accordance with CAN/CGSB 4.2 NO. 27.594, Textile Test Methods – Flame Resistance – 45° Angle Test – One Second Flame Impingement, shall have a time of flame spread of: (a) 3.5 seconds or less, if the product does not have a raised fibre surface; OR (b) 4 seconds or less, if the product has a raised fibre surface and exhibits ignition or fusion of its base fibres. Shall not exhibit burn characteristics associated with materials in whole or in part, made of or impregnated with celluloid or cellulose nitrate. Canadian Hazardous Products Act on Surface Coating Materials SOR/2005-109 and its amendment SOR/2010-224: Lead content: ≤90mg/kg Mercury content: ≤10mg/kg Shall not contain restricted products listed in item 8 of the schedule if it can, under reasonably foreseeable circumstances, became accessible to child or where the substance is a filling that may be released on breakage or leakage. Formulations used to prevent microbial degradation in Cosmetics, Liquids, Pastes, Putties, Gels and Powders used in toys (excluding art materials) shall be tested for microbial control and preservative effectiveness. ************ / Not Applicable / Not Applicable / Not Applicable Pass See Result Page / Not Applicable / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 11 of 19 PMI Test Report – Test Detail –PMI- Battery Operated Product Test Property Test Method SCOPE Test Principle / Requirements Results Applies to products that utilize batteries in order to operate. / The correct battery polarity using the polarity symbols “+” and “−” shall be marked permanently on the battery compartment or on the area immediately adjacent to the battery compartment on the product. Pass For US LABELING REQUIREMENTS Battery Labeling – Packaging / Product Visual check Other information like - No. of batteries required - Batteries included or not - Size of battery Could be located on the packaging or product. Non-replaceable batteries ASTM F963 Battery Warning Statement ASTM F963 These markings are not required for non-replaceable batteries or for rechargeable battery packs that, by design, can only be inserted in the correct orientation. Battery compartments for button cell batteries are not subject to this requirement. Non-replaceable batteries that are accessible with the use of other common household tool shall bear a statement that the battery is not replaceable. The following statement either in the instructions or marked on the device (required only for devices which use more than one battery in one circuit) -Do not mix old and new batteries -Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries / Not Applicable / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 12 of 19 PMI Test Report – Test Detail –PMI- Battery Operated Product Test Property Test Method Test Principle / Requirements For US REGULATORY (Mandatory) REQUIREMENTS Battery operated product ASTM F963 Shall meet the safety requirement as specified in 4.25.1 to 4.25.9 ASTM F963, section 4.25 - subsection 1 to 9. FCC Part 15 - Electric Toy FCC Parts 15 – 27 (26.96 – 27.28) MHz Radio Controlled Toy FCC Parts 15 – 49 (49.82 – 49.90) MHz Radio Controlled Toys UL Testing (For electrically operated product) *Mercury Content Applicable to Batteries FCC Part 15 Electric Toy FCC Parts 15 – 27 (26.96 – 27.28) MHz Radio Controlled Toys FCC Parts 15 – 49 (49.82 – 49.90) MHz Radio Controlled Toys UL Standard Acid digestion / AAS Shall meet the requirements specified in the standard. In lieu of testing, test report can be submitted if dated within two years. For the frequency of RC products meet the scope of these requirements. Shall meet the requirements specified in the standard. Results / Not Applicable / Not Applicable / Not Applicable In lieu of testing, test report can be submitted if dated within two years. Item will be audited to verify compliance with the selected sections of the applicable and/or labeled UL standard. It is the vendor’s responsibility for the conformity of this requirement. Relevant reports / documents must be submitted for review. US Mercury-Containing Battery Management Act Public Law No 104-142 (1996)/ Various US State Laws (Connecticut, Maine, and Rhode Island) Prohibited (SGS detection limit = 1 mg/kg) ************ / Not Applicable Pass See Result Page Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 13 of 19 PMI Test Report – Test Detail –PMI- Battery Operated Product Test Property Test Method Test Principle / Requirements Results For Canada LABELING REQUIREMENTS Packaging Labeling Consumer Pkg. & Labeling Act & Regulations Quebec, R.S.Q., c. C-11 ICES-003 labeling ICES-003 Manufacturer or distributor’s name & address (city & zip). Minimum 1.6 mm type size Placed anywhere except bottom – English or French. Product Net Quantity English And French (Metric) PDP, Bold, Type Size Based On PDP Size Principal Display Panel Minimum Type <32 cm2 (5 In2) --1.6 mm (1/16 In) >32 cm2 but <258 cm2 (40 In2) -- 3.2 mm (1/8 In) >258 cm2 but < 645 cm2 (100 In2) --6.4 mm (1/4 In) >645 cm2 but <25.8 dm2 (400 In2) -- 9.5 mm (3/8 In) >25.8 dm2 (400 In2) -- 12.7 mm (1/2 In) Product identification English and French, PDP in bold with 1.6mm minimum type size Every inspection on a product container, wrapping, leaflet, brochure or card supplied with the product, including the directions for use and warranty certificates, must be drafted in French. No inscription in another language may be given greater prominence than that in French. Product subjected to the requirements of ICES-003 shall be legibly and permanently marked in both English and French with the substances of : “This Class B digital apparatus complies with Canadian ICES-003.” And “Cet appareil numérique de la classe Best conforme à la norme NMB-003 du Canada.” Note : Similar sentence may be accepted. If placing of the markings is impractical on the product due to size or shape, these markings shall be marked on instruction manual supplied with the product. ************ / N/C / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 14 of 19 PMI Test Report – Test Detail –PMI- Battery Operated Product Test Property Radio Control Product Test Method RSS-GEN/ RSS-310 RSS-210 Test Principle / Requirements (A) Category II equipment shall be labeled with the manufacturer’s name or brand name, and model identification number and these words “Canada 310” .(RSS-GEN & RSS-310) (B) In addition to the user manual requirements in RSS-Gen (Section 7.1.5), the carrier frequency and the RF output power (or field strength and measurement distance) shall also be stated in the user manual. (for category II, in both English and French) : “This Category II radio communication device complies with Industry Canada Standard RSS-310. Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’Industrie Canada. » For this toy bell, needn’t bear this information. All Category I radio equipment intended for use in Canada shall permanently display on each transmitter, receiver, or inseparable combination thereof, the applicant’s name (i.e. manufacturer’s name, trade name or brand name), model number and certification number. * Certified radio equipment must be labelled with a unique certification/registration number: “IC:CN+UPN “ (RSS-GEN & RSS-210 ). ************ Results / Not Applicable Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 15 of 19 PMI Test Report – Test Detail –PMI- Battery Operated Product Test Property Test Method Test Principle / Requirements Results For Canada REGULATORY (Mandatory) REQUIREMENTS ICES ICES-003 The item shall meet the relevant requirements of ICES-003 if : / Not Applicable - Battery operated with power consumption exceeding 6nW, or both highest frequency generated and the highest frequency used are equal or exceeding 1.705MHz ; or - a.c. operated, with power exceeding 6nW and clock frequency > 10kHz. In lieu of testing, test report can be submitted if dated within two years. Shall meet the requirements specified in the standard. - Radio Frequency Product RSS310/RSS210 In lieu of testing, test report can be submitted if dated within two years. Battery leakage test Toys Regulations (SOR/2011-17) Section 43 of CCPSA Shall not reveal associated hazards upon subjection to vibration and drop testing. Note: N/C means not conducted as per client’s request. ************ / Not Applicable Pass Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 16 of 19 Result Page: US Battery Requirement for Mercury Content Method: With reference to EPA 3052: 1996 Analysis was performed by Direct Mercury Analyzer (DMA) Specimen Description 1. Battery (1.5V AA AM3 LR6) Note: - mg/unit = milligram per unit - ND = Not Detected (lower than MDL) - MDL = Method Detection Limit = 10 mg/unit Alias No. Tracing No. Result(s) (mg/unit) 1 1 ND The Prohibitions of Mercury contained batteries in United States are summarized as below Table Region Scope of Prohibition Effective Date United States alkaline-manganese battery with a mercury content that was intentionally introduced alkaline-manganese button cells with a mercury content over 25 milligram of mercury per button cell zinc-carbon battery that contains mercury that was intentionally introduced button cell mercuric-oxide battery Button cell batteries containing mercury Button cell batteries used in Medical device for delivering insulin Silver oxide button cell batteries Mercury-added button cell batteries: 1. Zinc- air button cell battery 2. Alkaline manganese button cell battery 3. Silver oxide button cell stamped with the designation SR357, SR 364, SR371, SR377, SR395, SR44W, SR621SW, SR626SW, SR920SW or SR927SW Mercury-added silver oxide button cell batteries Mercury-added button cell batteries Silver oxide button cell batteries 13 May, 1996 Connecticut State Maine State Rhode Island State 13 May, 1996 13 May, 1996 13 May, 1996 1 July, 2011 1 January, 2015 1 July, 2012 1 January, 2012 2 January, 2015 1 July, 2011 1 January, 2012 Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 17 of 19 Lead in Paint / Similar Surface Coating Material Method: With reference to CPSC-CH-E1003-09.1 - Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings Alias No. Tracing No. Result(s) (ppm) Comment 1. Iridescent glitter 4 1 ND Pass 2. Grey coating (Head, arm, body) 4 2 ND Pass 3. Lt. blue coating (Scarf, light, cap) 4 3 ND Pass 4. Blue coating (Scarf, light, cap) 4 4 ND Pass 5. Yellow coating (Mouth, star, foot) 4 5 ND Pass 6. White (Cap, eye) w/ black (Eye, brow), brown (Eye, eyelash), cream (Blush) coating 4 6 ND Pass 7. Purple w/ red coating (Light) 4 7 ND Pass 8. Pink (Mouth) w/ Dk. green (Light), golden (Lamp-socket) coating 4 8 ND Pass 9. Silver coating (Wire jacket) w/ black coating on paper label 4 9 ND Pass Specimen Description Note: - ppm = parts per million - 1% = 10000 mg/kg = 10000 ppm - ND = Not Detected (lower than MDL) - MDL = Method Detection Limit = 10 ppm The requirement(s) for lead in paint/similar surface coating material is(are) summarized as below: Requirement Lead in Paint / Similar coating per CPSC 16 CFR 1303 Permissible Limit (ppm) Effective date 90 Current Limit Test Report No. SZTY1204001880SD Date: APR 25, 2012 Page 18 of 19 Canada Surface Coating Materials Regulations (SOR/2005-109) - Lead and Mercury Content Method: With reference to Canada Health Product Safety Bureau, Reference Manual Book 5 – Laboratory Policies and Procedures, Part B: Test Methods Section, Method C-02.2, C-07 Total Test Item(s) Permissible Limit (mg/kg) Pb Hg 90 10 Alias No. Tracing No. 1. Iridescent glitter 2 1 ND ND 2. Grey coating (Head, arm, body) 2 2 ND ND 3. Lt. blue coating (Scarf, light, cap) 2 3 ND ND 4. Blue coating (Scarf, light, cap) 2 4 ND ND 5. Yellow coating (Mouth, star, foot) 2 5 ND ND 6. White (Cap, eye) w/ black (Eye, brow), brown (Eye, eyelash), cream (Blush) coating 2 6 ND ND 7. Purple w/ red coating (Light) 2 7 ND ND 8. Pink (Mouth) w/ Dk. green (Light), golden (Lamp-socket) coating 2 8 ND ND 9. Silver coating (Wire jacket) w/ black coating on paper label 2 9 ND ND 10. White paper label 3 1 ND ND Specimen Description Note: - mg/kg = milligram per kilogram - ND = Not Detected (lower than MDL) - MDL = Method Detection Limit - MDL for Pb = 10 mg/kg - MDL for Hg = 1 mg/kg - 1% = 10000 mg/kg =10000 ppm Result(s) (mg/kg) Test Report No. SZTY1204001880SD Date: APR 25, 2012 Sample Photo: SGS authenticate the photo on original report only *** End of Report *** Page 19 of 19