Download USER`S MANUAL
Transcript
DSC36 DSC36 4. Input Parametric EQ There are six bands of parameter equalisation available on every input. The behaviour of each individual band can be changed to a variety of different filter shapes, including high and low shelves, and bandpass. Changing the filter type is achieved by first encoder. Confirm filter type by pressing ENTER. SOFTWARE GUIDE *** program running firstly please check the unit is connect to PC by USB or RS485 1. Choose connecting from menu, select comport by clicking ok,You can use Search ID to find the connect devices also you can give the unit ID by hand,It can save your time. INPTU A LOW-SHELF EQ1 Filter type PEQ EQ1: 0. 0dB 20Hz 0.05 / 0ct Frequency ‘Q’ Gain Figure 4 5. Output Gain The range of the control over the output gain is –36dB to +20dB in 0.1dB steps. Out 1 0. 0dB Gain Figure 5 Gain Fig 2.1 2. The Data currently use the unit will upload to Pc when they connected the screen of unit will shows “computer connecting” 6. Output Polarity The polarity (or phase) of each output may be switched individually as below. Out 1 Normal Polarity Figure 6 - or + Page 10 User's Manual User's Manual Page 7