Download Vibration Analyzer

Machinery Health™ Management
international safety standards for
hazardous areas in the United
States, Canada and Europe.
Accessory Options
Speed Detection
Accurate detection of the shaft
turning speed is critical to
effective machinery health
analysis. The CSI 430 Laser
Speed Sensor allows you to
determine shaft speed without
Applications for Advanced Balancing and Alignment make it possible to detect
and correct machinery faults with the same CSI 2130.
is available in AMS Machinery
Once the data is retrieved by the
The Laser Alignment Expansion
job format and stored in AMS
Manager.
Pak adds this important capability
to any CSI 2130.
CSI 9210 Machinery Health
Transmitter
With the 9200 Link application,
the CSI 2130 can be used to
CSI 2130, it can be placed in a
Machinery Manager for detailed
analysis. The addition of the 9200
Together with the MotorView
Manager, the CSI 2130 performs
and stator condition in induction
an intelligent field device that
motors. This can be accomplished
motor-pump combinations.
or Emerson’s patented flux
with a standard current clamp
The CSI 9210 will alert plant
monitoring.
detected in the monitored
Designed for use in industrial
machine. Upon an alert
condition, rich spectral data
will be stored in the CSI 9210.
revolutionary new triaxial sensor.
This sensor can be magnet
mounted to the machine and
still provide high-quality readings
To measure orbits on a protection
®
non-intrusive analysis of the rotor
operators when a problem is
The Model A0643TX is a
Motor Current Analysis
of your vibration analysis program.
a CSI 9210 Machinery Health
can be deployed on essential
Triaxial Accelerometer
in all three directions.
module in AMS Machinery
Transmitter. The CSI 9210 is
specific markings on the machine.
Link application extends the reach
retrieve high-resolution spectral
data and PeakVue data from
requiring reflective tape or
Industrial Ratings
environments, the CSI 2130 has
Proximity Probe Connections
system, use BNC-type cables and
the dual-volt adapter. The phase
reference can be read using the
generic tach cable.
Structural Analysis
For advanced structural analysis,
use the modally-tuned hammer
listed at the bottom of page 11.
See pages 10 -12 for additional
accessory listings.
received an IP 65 rating certifying
that it is dust- and splashwater—
tight. It also complies with
Page 7