Download ATPL230A USER GUIDE

Figure 6-41. Reception test result.
While tests are executing, a row is added to the top table with information about the frame currently
transmitted/received. The columns that contain these tables are the following.
Table 6-1.
Transmission/Reception parameters showed in columns.
Transmission parameters showed
62
Reception parameters showed
Parameter
Description
Parameter
Description
Frame #
It indicates the number of frame
transmitted. It is useful to track
the test progress.
Frame #
It indicates the number of frame received.
It is useful to track the test progress.
Tx Result
It indicates the result of transmission. If an error occurs, a
descriptive text will appear.
Frame type
It indicates the frame type of the frame
received.
Data
It shows the message transmitted
in ASCII format.
Modulation
scheme
It indicates the modulation scheme of the
frame.
Tx Interval
It is the interval of time between
the transmission of the current
frame and the previous one.
RSSI
It indicates the strength of the signal
received in dBuV.
SNR
Signal Noise Ratio is a parameter calculated
as is defined in the PRIME spec (dB).
EVM
Error Vector Magnitude is a parameter
calculated as is defined in the PRIME spec
(dB).
Data
It is the received info in ASCII format.
ATPL230A-EK
Kit User Manual [USER GUIDE]
6
Atmel-43075E-ATPL-ATPL230A-EK-Kit-User-Manual-UserGuide_03-Nov-2015
2