Download TraceX User`s Manual - Renesas Electronics

Transcript
260
This results in the Memory Save dialog to be
displayed. Enter the starting and ending address and
the trace file name, then select the Save button. In
the example shown below, the IAR tools save the
specified trace buffer into Intel HEX records in the file
trace_file.hex.
At this point, we have the trace buffer saved in the
trace_file.hex file on the host and is ready for
viewing with TraceX.
CodeWarrior Tools
The trace buffer can be dumped to a host file easily
with the CodeWarrior tools by entering the save
command in the Command Window. The following
example save command assumes the trace buffer
starts at 0x102200 and ends at 0x109F00:
> save –b p:0x102200..0x109F00 trace_file.trx -a 32bit
User Guide