Download 3.2 maintenance mode

ISSUE: 1
RELEASE: 2
•
Autoresponding cycle.
•
Radius alarm.
•
Time limit alarm.
•
Discrete input alarm. The command AT+SNGPSALARM
can be used to configure the alarm type (level,
transition, etc).
Frame 78: Modem’s actual configuration. Contains the
same fields as the 3F frame.
4.4
The
TEXT MESSAGES
Amigo GPS modem can also receive text messages, sent
from a mobile phone. If the text message is considered as valid
(as described in the following chapters), the
execute the corresponding order.
Amigo
will
Some base numbers have a special signification:
• The base number 99999999 means that the base DOES NOT
support binary messages: only text messages sent from the
base phone number will be recognized.
The alarms and autoresponding cycles are converted to text
position messages (See 4.4.2 Alarms with text messages on
page 4.4), sent to the base phone number.
Only text messages from the authorized phone number will
be accepted.
• The base number 99999998 means that the base DOES NOT
support binary messages: only text messages (sent from
ANY phone number) will be recognized.
The alarms and autoresponding cycles are converted to text
position messages (See 4.4.2 Alarms with text messages on
page 4.4), sent to the base phone number.
The answer to text orders (position request, etc) will be sent
MU-AMI-035-SN
NOVEMBER 2001
OPERATOR’S MANUAL
PAGE: 4.2