Download S7065 - Tyan

Chapter 3: BIOS Setup
3.1 - About the BIOS
The BIOS is the basic input/output system, the firmware on the motherboard that
enables your hardware to interface with your software. The BIOS determines what a
computer can do without accessing programs from a disk. The BIOS contains all the
code required to control the keyboard, display screen, disk drives, serial
communications, and a number of miscellaneous functions. This chapter describes
the various BIOS settings that can be used to configure your system.
The BIOS section of this manual is subject to change without notice and is provided
for reference purposes only. The settings and configurations of the BIOS are current
at the time of print and are subject to change, and therefore may not match exactly
what is displayed on screen.
This section describes the BIOS setup program. The setup program lets you modify
basic configuration settings. The settings are then stored in a dedicated, batterybacked memory (called NVRAM) that retains the information even when the power
is turned off.
To start the BIOS setup utility:
1. Turn on or reboot your system.
2. Press <Del> during POST (<Tab> on remote console) to start the BIOS
setup utility.
3.2 - Setup Basics
The table below shows how to navigate in the setup program using the keyboard.
Key
<F1>
<ESC>
Å Æ arrow keys
↑ or ↓ arrow keys
<Tab> / <Shift-Tab>
<Home> / <End>
<PgUp> / <PgDn>
<->
<+>
<F8>
<F3>
<F4>
<Enter>
Function
General help window
Exit current menu
Select a different menu
Move cursor up/down
Cycle cursor up/down
Move cursor to top/bottom of the window
Move cursor to next/previous page
Select the previous value/setting of the field
Select the next value/setting of the field
Load Fail Safe default configuration values of the
menu
Load the Optimal default configuration values of
the menu
Save and exit
Execute command or select submenu
49
http://www.TYAN.com