Download Stop/Exit

Telephone and External devices
Tone or Pulse
7
If you have a Pulse dialling service, but need
to send tone signals (for example, for
telephone banking), follow the instructions
below:
a
b
Features like Voice Mail, Call Waiting, Call
Waiting/Caller ID, answering services, alarm
systems or other custom features on one
telephone line may create problems with the
operation of your machine.
Press # on the machine’s control panel.
Any digits dialled after this will send tone
signals.
Note
When you hang up, the machine will return to
the Pulse dialling service.
Caller ID is available for U.K. and Ireland
only.
7
When the machine is in Fax/Tel mode, it will
use the F/T Ring (fast double-ring) to alert
you to pick up a voice call.
If you are at the machine, you can lift the
handset or press Speaker Phone to answer.
If you are at an extension telephone, you'll
need to lift the handset during the F/T Ring
Time and then press # 5 1 between the fast
double-rings. If no one is on the line, or if
someone wants to send you a fax, send the
call back to the machine by pressing l 5 1.
7
Your machine supports the Caller ID
subscriber telephone service that some
telephone companies offer.
Press Speaker Phone on the machine.
Fax/Tel mode
Telephone services
Setting the Telephone Line
Type
7
If you are connecting the machine to a line
that features PBX or ISDN to send and
receive faxes, it is also necessary to change
the Telephone Line Type accordingly by
completing the following steps.
a
b
Press MENU.
c
d
Press Initial Setup.
e
f
g
Press Phone Line Set.
Press a or b to display
Initial Setup.
Press a or b to display
Phone Line Set.
Press PBX, ISDN (or Normal).
Press Stop/Exit.
57
7