Download "user manual"

This will open the Advanced Settings window:
the Advanced Settings window
4. In the Advanced Settings window, select the new COM port from your the COM Port Number pull
down menu.
the Advanced Settings window
Once you have selected the new COM port number, the Keyspan software will ask you if you are sure
you want to proceed.
IMPORTANT:
Please note that you can select any COM port you wish however, you may notice that certain ports
are 'in use'. This may mean that there is hardware connected to these COM ports or they have been
reserved for the operating system or other software. Changing the COM port mapping to a COM port
that is 'in use' may render any hardware and/or software using that port inoperable.
5. Your COM port has now been changed to the new COM port number. To confirm the change, return
to the Device Manager and locate the new COM port under the Ports (COM & LPT) heading.
USA-19HS - User Manual
Page 13 of 30