Download User`s Manual - Alpha Control Lab

Fig. 4.5 Configuration parameters/Real-Time Workshop tab
If all the parameters are set properly you can start the real-time executable building
process. For this purpose press the Build push button at the Real Time Workshop tag (Fig.
4.5), or simply “CRTL + B”. Successful compilation and linking processes generate the
following message:
Model MyModel.rtd successfully created
### Successful completion of Real-Time Workshop build procedure for model: MyModel
Otherwise, an error message is displayed in the MATLAB Command Window.
In this case check again your MATLAB configuration and simulation parameters.
TRAS User’s Manual
-42-