Download User Manual

The Intelligent Surveillance Solution
Note: The maximum of pre-record/post record period is 60 seconds.
NVR/DVR/Hybrid NDVR System
3.3.2 Record Mode
There are 4 recording modes and 5 video profiles to choose from. Choose the one that suits your scenario
best.
Always Record:
Select this option to record the video continuously.
Boosting Record on Event:
This option enables you to record at lower frame rate at
regular times, and at higher frame rate under Smart
Guard triggered events.
*This feature is not available under NVR Lite License
Select this option to obtain the “Select Event” panel.
Choose from the list any Smart Guard or digital input
events or video analytics from the device. The chosen
event(s) will trigger the recorded action. Click OK.
General Setting desired frame rates of normal and
boosting recording in the Video Encoder box.
Note: Please note it is required to enable ”Smart Guard”
from the Mainconsole panel before General Setting “boosting record on event” to trigger recording.
Record on Event:
Select this option to start recording at any predefined event, including Smart Guard events, metadata
events, digital input events and video analytics from devices.
* Some options are not available under NVR Lite License
Select this option to obtain the “Select Event” panel. From the Smart Guard list, check the camera events or
digital inputs to trigger the recorded action. Click OK.
Note: Please note it is required to enable ”Smart Guard” from the Mainconsole panel before General Setting
“record on event” to trigger recording.
Record on Motion:
Select this option to start recording when motion is detected. Adjust sensitivity, the frame interval and zone
to setup motion detection. To setup a single detection zone, left-click and drag the mouse to draw a
rectangle. To setup more than one detection zone, simply repeat the same process or click “All” to select
the entire screen.
Note: The maximum number of rectangle detection zones is 10.
Note: For DVR cards, Record on Motion Mode can be only assigned on Record 1.
3.3.3 Option
This option sets up the frame rate an audio of the recorded video. The “Video Preview” window is the
preview of the recorded video corresponding with the option.
- 61 -