Download CNGE2FE16MS

INSTALLATION AND OPERATION MANUAL
CNGE2FE16MS
LACP Enabled
Having configured the aggregator setting with LACP enabled, you can check the trunking group
information between two switches on the Aggregator Information tab.
Configuration for Switch 1
»» Set System Priority of the trunk group. The field displays 1 by default.
»» Select a trunk Group ID by selecting the pull-down menu.
»» Enable LACP.
»» Include the member ports by highlighting the ports in the right list box and then select the
Add button. Note the number in the Work Ports field changes automatically depending on
how many ports you have selected.
Figure 59 – Switch 1 configuration interface
INS_CNGE2FE16MS_REV–
Tech Support: 1.888.678.9427
01/11/12
PAGE 62