Download User`s Manual

IGS-9812GP Series User’s Manual
5.1.2.3 Auth Method
This page allows you to configure how a user is authenticated when he logs into the switch via
one of the management client interfaces.
Label
Description
Client
The management client for which the configuration below applies.
Authentication Method can be set to one of the following values:
Authentication
Mothod
none: authentication is disabled and login is not possible.
local: use the local user database on the switch
for
authentication.
radius: use a remote RADIUS server for authentication.
Enable fallback to local authentication by checking this box.
If none of the configured authentication servers are alive, the
Fallback
local user database is used for authentication.
This is only possible if the Authentication Method is set to a
value other than 'none' or 'local'.
Click to save changes.
Click to undo any changes made locally and revert to previously
saved values.
ORing Industrial Networking Corp
20