Download MiniTT1

Channels
Channels enable you to work with other photographers and to keep your triggering exclusive. Some
channels operate on different frequencies to help you avoid interference. All PocketWizard radio slaves set
to the same channel work together.
ControlTL uses a new channel system in addition to the Standard channel system used in other
PocketWizard radios. The MiniTT1 Transmitter and FlexTT5 Transceiver can trigger all existing
PocketWizard radios. They can also be taught channels (including new ControlTL channels) by existing
PocketWizard transmitters. The FlexTT5 can operate as a receiver for any PocketWizard transmitter.
IMPORTANT: When a MiniTT1 or FlexTT5 is used as a transmitter, it always sends out 2 triggers, one
ControlTL trigger on a ControlTL channel, and one Standard trigger on its channel. This enables you to use
an E-TTL II system with other manual flashes. The ControlTL system synchronizes both triggers precisely.
MiniTT1 & FlexTT5 Channel
Compatibility
HyperSync
(See Page 25)
E-TTL II
MiniTT1
FlexTT5
ControlTL Channels 1 – 20
Standard Channels 1 - 32
Zones A, B, C
Yes
Yes
Plus II & Plus
Standard Channels 1 – 4 Yes
No
MultiMAX & MAX
(see Page 25)
Standard Channels 1 – 16
Quad-Triggering Channels 17 - 32
(Zones A, B, C)
Yes
No
OEM units w/ PocketWizard
(see Page 25)
Standard Channels 1 – 16
Quad-Triggering Channels 17 - 32
(Zones A, B, C)
Yes
No
Canon E-TTL II system channels are not used by the ControlTL system.
22