Download 3 Sixty 2R - Performance Audio
Transcript
3 Sixty 2R System Menu 1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that “Personality” is highlighted, then press ENTER. 2. Press the UP or DOWN buttons until “Status Settings” is displayed, press ENTER. 3. Press UP or DOWN buttons, until “Tilt_L Reverse” is displayed, and press ENTER. 4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between. 5. Press ENTER to confirm your selection or press MODE/ESC to exit. Tilt_R Reverse - With this function you can reverse the right head Tilt movement. This function is used with DMX mode. 1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that “Personality” is highlighted, then press ENTER. 2. Press the UP or DOWN buttons until “Status Settings” is displayed, press ENTER. 3. Press UP or DOWN buttons, until “Tilt_R Reverse” is displayed, and press ENTER. 4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between. 5. Press ENTER to confirm your selection or press MODE/ESC to exit. Pan Degree - With this function you can change the pan degree from 630 to 540. This function is used with DMX mode. 1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that “Personality” is highlighted, then press ENTER. 2. Press the UP or DOWN buttons until “Status Settings” is displayed, press ENTER. ADJ Products, LLC - www.adj.com - 3 Sixty 2R Instruction Manual Page 28 3 Sixty 2R System Menu 3. Press UP or DOWN buttons, until “Pan Degree” is displayed, and press ENTER. 4. Either “540” or “630” will be displayed, use the UP and DOWN buttons to toggle between. 5. Press ENTER to confirm your selection or press MODE/ESC to exit. Feedback - With this function you can feedback switch the pan movement or tilt movement. 1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that “Personality” is highlighted, then press ENTER. 2. Press the UP or DOWN buttons until “Status Settings” is displayed, press ENTER. 3. Press UP or DOWN buttons, until “Feedback” is displayed, and press ENTER. 4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between. 5. Press ENTER to confirm your selection or press MODE/ESC to exit. Movement Speed - With this function you can set the pan and tilt movement speed. 1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that “Personality” is highlighted, then press ENTER. 2. Press the UP or DOWN buttons until “Status Settings” is displayed, press ENTER. 3. Press UP or DOWN buttons, until “Movement Speed” is displayed, and press ENTER. 4. Either “Speed 1”, “Speed 2”, “Speed 3” or “Speed 4” will be displayed, use the UP and DOWN buttons to toggle between. 5. Press ENTER to confirm your selection or press MODE/ESC to ADJ Products, LLC - www.adj.com - 3 Sixty 2R Instruction Manual Page 29