Download PowerMaxComplete User Manual English D3302213

SPECIAL FUNCTIONS
Command
SMS Format
SMS format –
PowerMaxComplete Partition
System
1
Arm AWAY
“AWAY <code>”
or
“AW <code>”
“P# AWAY <code>”
or
“P# AW <code>”
2
Arm AWAY instant
“P# AWAY INST <code>”
or
“P# AWI <code>”
3
Arm AWAY Latchkey
“AWAY INST <code>”
or
“AWI <code>”
“LATCHKEY <code>”
or
“LK <code>”
4
Arm AWAY Latchkey instant
“LATCHKEY INST <code>”
or
“LKI <code>”
“P# LATCHKEY INST <code>”
or
“P# LKI <code>”
5
Arm HOME
“HOME <code>”
or
“HM <code>”
“P# HOME <code>”
or
“P# HM <code>”
6
Arm HOME instant
“HOME INST <code>”
or
“HMI <code>”
“P# HOME INST <code>”
or
“P# HMI <code>”
7
Disarm
“DISARM <code>”
or
“DA <code>”
“P# DISARM <code>”
or
“P# DA <code>”
8
Turn PGM on
“PGM ON <code>”
“P# PGM ON <code>”
9
Turn PGM off
10
11
“PGM OFF <code>”
Define custom house identity “HOUSE NAME <code> <house ID>”
(see note)
or
“HN <code> <house ID>”
Query system status
“STATUS <code>”
or
“ST <code>”
“P# LATCHKEY <code>”
or
“P# LK <code>”
“P# PGM OFF <code>”
“P# HOUSE NAME <code> <house ID>”
or
“P# HN <code> <house ID>”
“P# STATUS <code>”
Or
“P# ST <code>”
Note: House ID includes up to 16 characters, for example JOHN'S HOUSE.
Reporting by SMS
This option is applicable only if the GSM Module is
installed. The PowerMaxComplete system can send
SMS messages to a registered SMS telephones (up
to 4). (The SMS telephone registration is preselected
by the system installer).
The reported SMS messages are quite clear and selfexplanatory and therefore are not detailed in this guide.
Example of the reported SMS messages:
• JOHN’S HOME
**AWAY**
• JOHN’S HOME
**DISARM**
• JOHN’S HOUSE
POWERMAX: LOW BATTERY
GARAGE: LOW BATTERY
• JOHN’S HOUSE
STATUS MESSAGE 01
(Event list is displayed)
D-302213
Note
Status messages can be sent only to a calling
telephone whose identity number is not blocked by
the user!
Note: The PowerMaxComplete may react with a
delay to received SMS messages if a GPRS session
is in progress at the same time.
Conducting a Walk Test
The walk test is an indispensable operation by which
you verify that all detectors function properly, without
disturbing the neighbors with loud sirens. The test
must be performed at least once a week, and
should include all detectors in all zones.
Before performing walk test, all the detectors must
be in normal state. Normal state is achieved when no
motion is made for at least 2 minutes.
21